13-16 Feather-Lite 🪶 surface drive vs Sc300
Vložit
- čas přidán 26. 08. 2024
- Feather Lite is belt driven, has stainless prop, inertial clutch, weighs 56lbs (kit only) and can be trimmed on the fly…$999 for the kit. Fits most 8hp to 16hp engines like Mud-skipper 12, 14 or 16hp and Predator 13, GX390 etc
Lots of great features, light weight, stainless hardware, cantilevered throttle control and easy to assemble
Very excited to try this after hard water season!
I'm waiting to see if you ever come out with electric trim, I want electric trim.
Verrygood you can do it
Want to buy only 7.5hp precise engine design with
How much does my friend cost?
I'm from Brazil the freight is very expensive
I need to buy the project thank you
Will you make a featherlight that can be used with 22hp motor?
22 hp engines typically weigh at least 100 pounds and need a reinforced frame. We do sell a surface drive that weighs 120 pounds by itself that fits the predator 22
Can you make a video showing the Surface drive sport kit vs the feather-lite? is the better gear ratio the only difference?
We could do that, yes
Sport model has a cast aluminum housing. Weighs approx 100lbs and uses a 9" prop. Available in 15-16" or 18-21" trim
The Feather lite uses a pared down, welded aluminum housing. 9" prop. Only available in 15-16" trim. Feather lite weighs 65lbs
Both kits use the same clutch, same prop but different belts
@Mudskippermotors the weight savings alone is enough for me lol we are currently building a 1448 and looking at different surface drive options. This was a great video thanks again
Could use that in the mangroves of machala ecuador......but....a lot of pirates
Bummer…it’s not pirate resistant
❤❤❤❤❤ابدي بشرح التفكيك والتركب اتفكك وتكب يا قللبي❤❤❤❤❤
How much does the featherlight weigh with the 13.5 vanguard?
I’d expect about 125lbs
Where can I get these sprockets for the sc300?
They’re part of a rebuild kit on our website
@@Mudskippermotors which kit is that? I am un able to find them
@@Mudskippermotors it show a the revolution rebuild has been out of stock for a while. Do you know when they will return? Have been trying to find these sprockets for a few months
Would a 16hp vanguard work on this?
Yes if you can find one
Make sure the crankshaft is 1” x 2-29/32”
Prise kitna hai
Como puedo comprar uno de estos vivo en colombia
We ship to Columbia please email us at sales@mud-skipper.com
Como eu posso conseguir o produto
Please provide us contact detail,we are interested in purchase
You can email us at: sales@mud-skipper.com