Growatt All-in-one Inverter, charge controller, AC charger and automatic transfer switch
Vložit
- čas přidán 30. 07. 2024
- Growatt 24V
👉watts247.com/product/2-x-spf-...
Growatt 48V
👉shopsolarkits.com/products/gr...
➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖
Recommended Online Store For Solar Equipment.
Signature Solar
👉signaturesolar.com/?ref=Roll2
Practical Preppers Store
👉bit.ly/PracticalPreppersStore
➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖
Contact info: 📧 roll2videos@gmail.com 📧
I'm not available for consultation or personal project advice.
➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖
🛑I (Roll2Videos) want to clarify that this channel's content is created for entertainment and informational purposes. Some activities featured in our videos may be performed by trained professionals and should not be attempted without proper expertise, supervision, and safety precautions.
By watching my content, you agree that you understand the risks associated with any actions demonstrated in the videos. I strongly discourage attempting to replicate any activities or actions you see on this channel without seeking professional guidance and ensuring your safety.
Please note that I cannot be held responsible for any injuries, damages, or adverse consequences that may occur if you decide to replicate, imitate, or participate in activities demonstrated in my videos.
Your safety is paramount to me, and I encourage responsible decision-making when engaging in any activities inspired by our content. If you have any safety concerns, always seek expert advice and take appropriate precautions🛑 #lifepo4 #solar #solar #battery
Recommended Online Stores For Solar Equipment.
Practical Preppers Store
👉bit.ly/PracticalPreppersStore
Watts247
👉watts247.com/?wpam_id=102
Current Connected
👉currentconnected.com/?ref=roll2videos
Just installed mine in 35ft camping trailer...really is a wonderful unit. Thx
Happy camping my friend 👍
Great demonstration! I’ve been looking at this inverter for a while. Didn’t. Know it had the feature to auto start and shut down a generator if needed. I’d love to see a short video on that process working.
Most of the all-in-one units have this dry connection for generators like the generac standby generator. I do not have one to
demonstrate for you. One day when I win the lottory maybe :)
Easy to understand and very professional in presentation
Thank you very much
nicely done. Thank you.
SPF 3000TL LVM-24P In this model inverter, should I use lithium phosphate battery. Or just use lead acid. Because I have seen the data sheet, the data sheet only mentions the name lead acid battery. Please give details.
Great Video. I have 2 -3k 24v growatts in series or split phase. Been running my casting shop for about a year now with no problems.
Sounds like a great setup. It's good to hear the unit runs without fail
What battery did you use with them? How many?
Also how many solar panels and size please. Thanks.
thanks for the video, my 2 lv6548 i ordered from watts just arrived today cant wait to hook the up
I'm jealous, They have a great store you will not be disappointed enjoy your MPPs 😀
@@Roll2Videos i looked at growatt for a long time it was tuff choice like them both you got a good unit there
I’m halfway through wiring my 6548’s. They are amazing machines.
@@GavinStoneDIY Yes, yes they are I hope to own a pair one day soon. What type of batteries are you using?
@@Roll2Videos I’m using the EG4 batteries from signature solar. I’ve got 3 of them currently, and I’m hoping to purchase another 3 in a couple months as money allows. I have the setup in my shop and I’ve already got the inverters wired up to the batteries and the sub panel in there. Everything has tested well. I’m ditching the inlet power line to the inverters today.
Thank you for all the extra information.. ie: planning your solar panels to meet the GrowWatt's VOC requirements... One question though... You mentioned that you have to pre-charge the inverter when using LiFePO4 batteries... What do you recommend precharging for normal usage? TIA.
It's only during the battery connection you'll need to pre-charge the capacitors. If the batteries stay connected you won't need to pre-charge them 😁👍
Excellent review. Really hoping that Growatt makes a 5000W model like this where I can use 2 in parallel to get split phase. Their 12KW model is an excellent device but given that it's low frequency, it's quite heavy.
They do make a 5k. 48v
@@2olvets443 yes they do but i discovered you can't parallel them to make a 240 split phase like you can with their 3000w model. they 5000 model can only be paralleled for single phase 230/240 or 3 phase.
The dry contact used to be for neutral bonding through an external bonding relay. I wonder if they have put the bonding internal now. I'd suggest doing a test on grid vs off grid with an outlet tester and see if the neutral is properly bonded in both positions now.
It is not bonded when off grid. I'm going to make a future video explaining this. I will be bonding it as well as making my own earth ground.
@@Roll2Videos It's one feature I really wish they'd make internal at this point. It wouldn't even cost them much to do so. At least with the old dry contact setup there was an easy way to do it so the bond moves to the proper location. My 48 volt units have been running for 2 years now and have held up well.
Nice to see that battery kick out 125A at it's 24 volt nominal. I think I'm going with the Growatt LVM-24P over the MPP LV-2424 after watching this video. Watts247 is a great resource for DIY'ers, too. I'll be sure to use your link as a thank you. ;)
Honestly, Go with the MPP solar. If I could choose I'd switch. Just on the N+G bonding switch alone. Either unit will work very well.
@@Roll2Videos Really? The Growatt is $599 right now, seems like a great deal I don't want to miss.
@@barnz008 both are great units, You'll be happy with either unit 👍
Can you limit the shore power amps/current like you can on the victron multiplus?
Also can it get SOC data your shunt?
Yes, you can set the charging amps.
The unit will show the SOC through wifi reading volts witch works with lead batteries. If using lithium you'd need a bms that can communicate with the growatt to get that reading accurately.
Hi. I have the February newest version of this growatt 24 i have hooked it temporarily to 4 / 400 w panels in series. Next I will add another 400 w in parallel and attach to a combiner box. How many of these 400 strings
Can I add ? I assume 1800w total. Am I correct? Thanks btw
I think 4/400w panels in series might put you over your open voltage circuit rating of 145 volts
Buy the 5000 es us abd they sell a transformer and you connect them and it's both 120 240 and 2 times the surge
Good suggestion
When you do dual phase split input, do you have to get some kind of Power reduced box to get to 120?
A single Growatt will only take 120v if you have 2 Growatts you would put leg 1 into the first unit and leg 2 into the second unit. Follow the manual.
@@Roll2Videos
I don’t have a growatt, just trying to understand the basics of split phase. How are you can have 240 and 120 at the same time. 🖖
DO you have a diagram to show how you wired in your precharge capacitor? Thanks - and thanks for the informative video!
Thank you, Here is a short showing you.
czcams.com/users/shortsQGqJp89hEfo?feature=share
If your off grid why do you need a transfer switch ? To swap over to generator power when one cell kicks the BMS off ?
Yes you could use it with a generator if you have a low battery situation. It can also be used in a mobile system for shore power hook up.
Sorry to ask s stupid question: what AC volts you get? We have appliances running on 240v on Grid in UK. Thanks.
For this model 95v to 140v Growatt has other models for the 230v UK market
Hi,
I have growatt inverter 5kw ES, i installed 4 gel batteries 12v 100ah, my question is what is the battery type that i should use, AGM, Flooded or Use and if Use what is the charging voltage, floating charging float and low DC cuttoff, and if possible should i use battery equilizer option for gel, and if yes how to use it.
That's a lot of questions lol. I'm more familiar with lithium I'd say refer to your owner's manual and use your preset battery options use gel with gel.
@@Roll2Videos thanks for your fast reply, the issue is in our country we have leak of experties because i got different answers that makes me confused, this is why i am trying to find sn answer online
Nice setup Roll2. Are you planning setting up and building a large bank of batteries to act as a UPS during power outages?
Yes 👍 in the future, I will have a huge setup. Just time and money are holding me up.
Do you have to use the negative cable to check the amps or can you clamp the positive?
I could clamp the positive but I always see shunts hooked up to the negative so I figure that's what should be measured.
I have a very similar setup as yours. I cannot figure out how to hook up my has generator to charge the batteries. Can you please show me where to hook the generator up. I tried putting a cord in the AC in but it didn’t work.
Turn on grid as priority
what guage wire from battery to inverter? if your using 30amp plug, how did it charge to almost 60amp? Do i need a large generator to charge batteries?
I think you are confused with AC vs DC.
Hi there, can this all-in-one prioritize on battery over grid? Meaning, will it wait until the battery bank is fully drained at night before switching back to grid power?
Yes, You can set it up to run like that. You can download the user manual and check it out
@@Roll2Videos Thanks! And will do. The link to the manual on the watts247 is 404, but will look on grow's site too). Would you recommend this solution for someone who just wants to use it with a battery bank? (my solar has its own grid-tie inverter connected to main panel. I just want to ATS-protect my 120v sub panel with some EG4 batteries)
Will this unit run a 9000 BTU Minisplit? Thinking of this for my Class A.
The minisplit looks to be under 1000 watts of power. You'll have 2000 watts left to play with.
Do you have a review of the GL4 12V teardown. I just ordered a unit and haven't seen it ship yet.
Can you email me a link
Many thanks for a great video. Very useful. I have a Tesla Gen. 3 wall connector to charge my Tesla. I am thinking to buy a Growatt inverter and Growatt battery. These will be connected to solar panels and the electricity grid.
Can a Growatt system be set up to communicate with the Telsa charger and Growatt battery so that when there is excess solar power during the day that is feed into my Telsa car first, and any excess solar is fed into the Growatt battery? Thanks again.
That's a question I'm not sure about. In the future if I can afford a Tesla I will test that idea. Sorry I can't answer that for you now.
Check out @willprowes CZcams channel he has some videos on off grid charging with the Tesla. czcams.com/users/WillProwse
Looking into getting the 24v 3kw model to replace my Aims 24v 4kw inverter. I would be spending more than the Growatts are asking to get a solar charge controller, so I figured I could just replace the Aims, and get a real all in one. After we save up a bit, I will be getting a second so we will have 6kw of power on the sunny days.
Hold off, I my have videos caming up on MPP solar inverters that might be a better option than the Growatt that I will explain. I'm probably a month out from making my videos on this topic
@@Roll2Videos That is fine. I am doing my homework while I can. Thanks for the heads up though. I am almost technically incompetent, but I am putting in the effort to learn more. Been off grid 5 years, and made plenty of mistakes. Trying to make as few more as possible.
@@pheorrungurd8746 5 years off grid that is quite the accomplishment 👍 here's to many more and positive results 🍻
@@Roll2Videos cheeper being off grid in Alaska, than not.
@@pheorrungurd8746 Oh wow Alaska that's some different kind of living up there. I'm in Ontario Canada and I thought I was up there your on another level.
What are the max amps you can feed into the inverter (when running in parallel)? Is that the max charge current?
I'm not sure off the top of my head and it's been awhile since I filmed this video.
You can google the user manual.
@@Roll2Videos the reason I'm asking is because the tech sheet doesn't list anything: i.postimg.cc/QtMMLSwS/image.png
Neither does SPF 5000 ES tech sheet say anything about max Amps, yet on the unit itself there's a sticker that says 18A: i.postimg.cc/MTXz3HfF/image.png
So is there a way of finding out the max Amps if they're not listed? like dividing the max Watts by something?
Is page 43 what you are looking for?
www.growatt-america.com/upload/file/contents/2021/11/61a5e51ec20b5.pdf
Does it allow 1/0 battery cables to the inverter? I know the manual says it recommends 2 gauge cables.
Yes you could but that would be extrem over kill for the amount of AMPs that will be traveling through that cable
@@Roll2Videos lol, I hear you. It's just that I have some spare 1/0 awg cables that I could use. Just wanna make sure they can fit properly. Thank you.
@@kahrlozt np enjoy your unit 😁
Good video thanks for sharing in a concise manner. Can you share what the idle power consumption is on the Growatt?
The stand-by consumption is 50W 👍😁
@@Roll2Videos Thanks, That seems high is this typical? On your setup that would take a bit off the battery fairly quickly?
@@dnhman That is pretty standard for these units. You'll have to size your battery bank and solar array accordingly.
@@dnhman I believe there is a power saving mode as well.
Hi
Great video
One question if you reach the battery limit and there is no sun, how do you recharge it whit the generator
Will the inverter turns on when you plug the generator or do you have to do something?
This video might help you
czcams.com/video/e-RuUy2aizw/video.html
19.6a * 120v puts it over the 2k watt limit if you ever actually hit the max.
It is my understanding you don't use the VOC for this calculation but the Vmpp * Impp have I been misinformed? With VOC there is a multiplier depending on what the low temperatures get to in the area you live.
I have this system with very similar Array.
Great question. The manual says 145 VOC maybe they have the difference built in the that VOC. I'll have to look into that more your way sounds more precise
@@Roll2Videos I think that is the volts either when cold or extremely warm that the system can handle. But you wouldn't use that for calculating the wattage hence using the other optimal volts with normal conditions. Here we adv high 20's to 30's for lows but have had teens so for 5-15*F the factor is 1.16. My Voc is 120.9 on the series total, 120.9 * 1.16 = 140.24 VOC which is below the threshold. My Vmpp is 33.9 each so 101.7v for series Impp is 18.74 for the 3s2p. 18.74 * 101.7 = 1905 watts. If you find I didn't get this information right please let me know as then I would also be over wattage for the Growatt.
My mind was on overload sorting this all to plan my system, and still in the works. Then I saw a video where an engineer was explaining it all, (finally it all clicked and made sense), but can't remember who that was now lol. I wish I could remember who and give you the link.
I have the panels, batteries, and other items on hand now. The Growatt is ordered with hopeful delivery in the first part of June.
I subscribed to you so I can watch more of your videos as you do have some good stuff. I did watch your control box build and will most likely do one that way myself, but will be more for Breaker and lightning inside. I have inline fuses for the panels so that should work, got 15a but maybe need to get 25 as the panel says 25 max. Will run the 15's in each series pre Y connect for the 3S2P.
Very good information I need to look into this more myself. I believe my system will work I'll post a fire video if not. As far as the 15a inline fuse you'll want to put them on your series strings before you parallel them.
czcams.com/video/s1P31hxlD3I/video.html
Great guy to learn from.
Is there a way to get dc output out of these? Or AC output only?
AC only from the unit
@@Roll2Videos would there be a way to run dc off the batteries still while also being hooked up to the unit? Or would throw off the unit?
@@xwongx Yes you can totally take power from the batteries and it won't mess up the unit. You can even get a buck converter to go from 24v down to 12v if need be.
They do make a 5000w you can ad the transformer so you get both 120 and 240 you only need one unit and the transformer i a growatt dealer if you want a deal and you can stack 6 but only need one abs a transformer
It's a good idea I've seen other do that. All I need is 3000w 120v but that you for the suggestion.
It will also bring up your surge load so it don't turn the unit off can start bigger loads like AC units transformer ads another 7500 watts of surge per unit
Can it connect to a 24v car alternator?
I don't know about that
if i am correct, this unit has max power of PV @ 1500W ? and how did you get 1800W of solar if you have 20amp@120v ??
I didn't explain that in detail but VOC is not the same as working voltage.
The unit can handle 1900W I have 1860W connected. Check out some on my other videos. The highest reading I've captured was 1785W of PV from 6-310W panels
@@Roll2Videos thanks, mine is a bit weird, it was running ok for 1 month, but last 10 days we have contant rain and lots of clouds, so battery went flat. Now i have batteries charged to 23v, but ac keeps shutting down constantly,
@@yaxo11 What type of battery are you using? Lead or lithium
@@Roll2Videoslead
@@yaxo11 🤔 Check your settings you might have something set wrong.
What is the standby consumption?
Great question. The standby consumption is 50 watts
Is the Growatt compatible with my 206 ah SOK battery?
Green horn beginner=me.
Sok have great batteries. 1 Sok is 12v you would need a pair in series to make 24v in-order for the Growatt to work. Thank you for the question.
@@Roll2Videos TKS for the info.
@@Roll2Videos mine is the 12 volt 206 ah SOK.
I want to build a 24 volt system when I get another 12 volt 206 ah SOK.
I have a TT and how to tie 24 volts into my TT so the outlets work is confusing to me. Know of any good videos?
@@sawmillmods1659 If it is the SK24100 there 24v battery then yes it will work.
@@nehpetsrellek2750 I'm not sure what you mean by TT
Hi, how much energy does the inverter consume while is working
We are just using a couple of light bulbs and the battery run out during the night
The battery is a 2.5 kWh growatt
Thanks
Are they lights for an airport runway?
Mine uses
What app are you using to check for hot spots?
@@stevenr8353 It's a app and camera that connects to the phone
SPF 3000 TL LVM-24P output volt how much 220 or 110
It can do both single phase
How loud are these units running a full load?
I'm not sure, I no longer have this unit hooked up. Not very loud from what I can remember.
@@Roll2Videos thanks, was going to have it in a home office. Wasn’t sure if it sounded like a standard PC or gaming rig with high speed fans 😀
@@TobyCostaRica Check out my link for $101 off if you buy. Thx