I am really impressed by the power of your 0turn mower. The grass is just starting to grow up my way... still a couple days before i can ride my cub cadet to the turfs. Thanks for the video!
Note to all watchers. To increase traction on duelies. You must increase weight as well otherwise your just decreasing traction by increasing surface the tires cover without more downforce. This is why jeeps with big ol 38" tires don't climb rocks well 😀
Just a little warning, the hydro pumps on ztrs have pretty low weight limits for how much they can pull, even a 27hp 72" cut exmark is only rated for towing 80lbs for a grass catcher. Tow more than recommended and you run a high risk of burning out the pumps, even more so on those small pumps on the ztr you have.
Ours is a john deere 0 track its a lot bigger and has a blower fan and 17 bushel hopper catcher.... We cut ball feelds with it at tbe collage i work for ....its awesome... Most all our equipment is J.D. our bat wing mower is a monster... Cuts 13 feet wide...
People claiming he had the truck in gear or the brake on until he used the ztr are dim. Even a residential ztr can weigh 250 pounds more than a basic riding mower...with most of the extra weight over the drive wheels. It looks like the craftsman version of my troy bilt mustang, which weighs just over 700 pounds.
I know what you mean. When mine had the stock turf tires, it was getting stuck all the time. Did you see where I cut the turf tires? That helped a bunch, but atv tires are the way to go. thanks for watching.
Hopefully you see this message. I have a craftsman yts 4500. Same set up as that green John deere. How can I pulley swap my tractor when it had the foot pedals for forwards and reverse. I was also told that you can weld the diffs because I have a dually set up as well with ag tires.
Thank you so much and I should have something for Saturday morning, I hope to hear from you again. P.S. There may be another before then too, since I am on summer schedule. Thanks for watching.
Wow! Having all the weight of the deck hang there really helped you pull that truck. Next time air down all of your mud mower tires for better traction
chud327 you shouldn't just do that for pulling. If you are them down it will lower your ground clearance a little bit but it will help in any situation you get your mud mowero into. I don't like those dirt Devil's. They need all of the help you can give them like airing them down. Good luck you should do a video on airing down everything.
i should try airing down. I used to want dirt devils really bad back when I had a 4 wheeler. If you go over 25 inches tall, they have really deep lugs. I am planning to put the tractor tires off of the dually onto the Deere. That will be a good experiment.
For mud mowers, I love craftsman. For mowing, I love a zero turn. I love my craftsman, but I just picked up a commercial Toro that is super fast... It may be my new favorite. I just did a video of getting it for free and getting it running. Thanks for watching.
I want use my rider for area they used a bush hog to clear an acres, shrubs and saplings, still stubs of wood sticking up, I want to ask do they make HD Brush blades for Craftsman or a mod you can suggest? So I can go through heavier stuff not wreck the machine, it's 16 HP
You may think that, but no. i am honest and should have shown it was in neutral with not parking brake on. In fact, I will do it again for you tomorrow on my latest full size truck project. Please tell me you are subscribed so you don't miss it. Thanks for watching.
wrong on the traction part unless you add weight because the more tire on ground less wight for traction. also the zero turn may have worked then but you will pay later they werent design to pull so your drive system wont stand up to the extra stress
The higher the hitch point the more weight transfers to the back wheels. If you can lift the front wheels while towing your at optimum traction. So twice the weight on the rear and twice the number of tyers makes twice the traction.
The main reason the zero turn won out was because it had the weight of the engine and a grown man riding on the tires and both tires were pulling. Those cheap mowers are super light in the back and the transaxles only give power to the free spinning tire
I find most of my tires of Facebook marketplace, you just have to be patient and look daily. I had to drive about an hour to get the dirt devils. Thanks for watching.
Hey chud, I live in Florida, where can I get mowers like this? I live in belleview and if you are willing to sell a mower with a vertical engine shaft then I will buy. I want a mower that I can put a predator 212 into and I can’t find any around Facebook marketplace that are worth it. Could you help me out?
you need to take the s-10 out of park to make it fair, wow fake news!!!! i did this exact test with my craftsman rider and my s-10, my craftsman pulled my s-10 all around the yard!!!
No, it's because regular tractors only have one drive wheel turning open differential, zero turn mower's have a rear end drive for each wheel and both wheels can get traction at the same time.
Somewhere there is man.Strong machines those MTD's. My brother has such a tractor , 13,5 horse and it is amazingly strong. The thing is the MTD is affordable and if you can work yourself on it for changing oil and belts and sharpening the blade it is a cheap machine. The motor is Briggs and as long it has oil on it it will run. MTD used to sell under their own name in Europe. Craftsman brand is hard to find in Belgium.
yeah i used to pull a 4 wheel dubble axle trailer with 4 cords of blocked up wood with a G2160 kubota wich it hauled like it wasnt even on it the little g2160 kubota was that strong powerful little diesel garden tarctor plus my kubota dealer gives a free 5 year warranty on them wich pretty good warranty for kubota mowers
Dude say you will Park the car on 4step treads to stop the wheels sinking a tad into the lawn . Plus a mechanic told me that those zero turns are Not made for towing . Buggers up the drive motor and then you are looking a big money. The school I worked at got rid of the slower mini tractor mid mount deck and spent up and bought a zero turn . Couldn't do anywhere near the amount of work we used to
I am really impressed by the power of your 0turn mower. The grass is just starting to grow up my way... still a couple days before i can ride my cub cadet to the turfs. Thanks for the video!
Me too. We are in full summer already, I have already mowed at least twice... Thanks for watching.
Man I love this guy! Awesome mechanic and wicked narration
Awesome to how ya get the youngsters in on the fun ! Thanks for sharing chud
I am glad that you took the brake off on the little pick-up. LOL
Travis Odom Yeah there’s no way I can prove it but the break was off the whole time. Thanks for watching.
This is awesome like how the zero turn mower just came & pull the s10 truck like nothing reminds me of my old s10 truck great job
Thanks so much and thanks for watching.
Note to all watchers. To increase traction on duelies. You must increase weight as well otherwise your just decreasing traction by increasing surface the tires cover without more downforce. This is why jeeps with big ol 38" tires don't climb rocks well 😀
At some point that may be true, but it is not always the case. Thanks for watching.
Love your videos
Thanks so much and thanks for watching.
You're kids will be wiser than many, glad they help you, and I see them have fun pulling stuff 👍
I agree and thanks so much for watching.
Just a little warning, the hydro pumps on ztrs have pretty low weight limits for how much they can pull, even a 27hp 72" cut exmark is only rated for towing 80lbs for a grass catcher. Tow more than recommended and you run a high risk of burning out the pumps, even more so on those small pumps on the ztr you have.
I was thinking the same thing, I probably won't be doing that much with my 0turn, that might be a once in a lifetime. Thanks for watching.
Its fine
@@MrDavidelliottjr Some people think they have the ultimate tractor pull machine
Look at pa proud as ever with his zero turn
I was pretty proud of it and thanks for watching.
Ours is a john deere 0 track its a lot bigger and has a blower fan and 17 bushel hopper catcher.... We cut ball feelds with it at tbe collage i work for ....its awesome... Most all our equipment is J.D. our bat wing mower is a monster... Cuts 13 feet wide...
nice! thanks for watching
Your jumper belt idea is ingenious!
As long as you keep you fingers clear and thanks for watching.
Take the zero turn mudding!!!! Great content!!!!
I actually have a video of this one mudding. Thanks so much for watching.
The dually. You should add a weigght bar to the front and back.
Good tip and thanks for watching.
1
Wow! You have wanting one of those.
Yes I have and thanks for watching.
I want your videos all the time when I notifies me I am first thing I do is watch it
i LOVE HEARING THAT AND PLEASE KEEP DOING WHAT YOU ARE DOING!!! THANKS FOR WATCHING.
chud327 Hey dude any time
Can you shut me out another video
nice video
Yes and thanks so much for watching.
Killer videos man.
Thanks so much and killer comment too. Thanks for watching.
i doubt those hydrostatic pumps will last too long with that kind of abuse! haha great vid
Yeah, I won't be doing that too often, just had to see if it would pull it. Thanks for watching.
Dually dually is running great! Keep up the good working!
Loving that dually and thanks for watching.
chud327 I wonder how the zero turn topped the dually dually?
More weight on the back tires is all I can figure.
I just got two riding mowers today! But I need ur help, Chud, can you make a video about it?
Where are you located? I wish you were close, I would be right over to make that video. thanks for the request.
Badass miss you Mr. F - coop
Thanks so much, you were one of the nice ones. Thanks for watching.
This is perfect.
Thanks, I am so glad you like and thanks for watching.
Super
People claiming he had the truck in gear or the brake on until he used the ztr are dim. Even a residential ztr can weigh 250 pounds more than a basic riding mower...with most of the extra weight over the drive wheels. It looks like the craftsman version of my troy bilt mustang, which weighs just over 700 pounds.
100% agreed, that thing pulls great especially with the atv tires. Thanks for watching.
I swear I saw a set of wooly boggers on that tractor.
Yes, the green one had some wooly boggers or look alikes on it it. thanks for watching.
I have a craftsman zero turn just like that. Guess I need some grippy tires. Cuz it just dont get around as good.
I know what you mean. When mine had the stock turf tires, it was getting stuck all the time. Did you see where I cut the turf tires? That helped a bunch, but atv tires are the way to go. thanks for watching.
Hes got like 64 million views but only about 150k subscribers, dang.
Dang is right and thanks for watching.
Fire up a Scag and witness the wonder.
That does sound like fun and thanks for watching.
let the tyres down till it's soft for better traction, simple
I should try that next time and thanks for watching.
The only reason why the zero-turn was able to pull the S10 was because all the other ones loosen it up for the zero turn
You are probably right and funny, thanks for watching .
never tried moving my friends truck over dirt, only gravel. that could be a interesting side test.
Do it and thanks for watching.
Badass
thanks for watching.
Hopefully you see this message. I have a craftsman yts 4500. Same set up as that green John deere. How can I pulley swap my tractor when it had the foot pedals for forwards and reverse. I was also told that you can weld the diffs because I have a dually set up as well with ag tires.
It is is an automatic, they don't recommend pulley swapping. Thanks for watching
Happy birthday If you don’t upload till Saturday
Thank you so much and I should have something for Saturday morning, I hope to hear from you again. P.S. There may be another before then too, since I am on summer schedule. Thanks for watching.
Wow! Having all the weight of the deck hang there really helped you pull that truck. Next time air down all of your mud mower tires for better traction
Putting the air pressure down would help out, that and some extra weight. thanks for watching.
chud327 you shouldn't just do that for pulling. If you are them down it will lower your ground clearance a little bit but it will help in any situation you get your mud mowero into. I don't like those dirt Devil's. They need all of the help you can give them like airing them down. Good luck you should do a video on airing down everything.
i should try airing down. I used to want dirt devils really bad back when I had a 4 wheeler. If you go over 25 inches tall, they have really deep lugs. I am planning to put the tractor tires off of the dually onto the Deere. That will be a good experiment.
chud327 yes that would. What ATV did you have?
That's really the hard way of digging a trench. The wheel spinning is a fine example of
U sub s > U sub k. (best I could manage with phone texting)
I don't really understand, but thanks for watching.
Do you have a preference of mowers/ engines ? Especially to service yourself.
For mud mowers, I love craftsman. For mowing, I love a zero turn. I love my craftsman, but I just picked up a commercial Toro that is super fast... It may be my new favorite. I just did a video of getting it for free and getting it running. Thanks for watching.
I want use my rider for area they used a bush hog to clear an acres, shrubs and saplings, still stubs of wood sticking up, I want to ask do they make HD Brush blades for Craftsman or a mod you can suggest? So I can go through heavier stuff not wreck the machine, it's 16 HP
I am not sure about heavier duty parts. Good luck and thanks for watching.
@@chud327 do you use regular blades, or saw like blades?
I've been wanting to put ags on my ztr. Thanks.
I would love that! Thanks so much and thanks for watching.
👍👍👍👍👍👍
*thumbs up*
Thanks so much and thanks for watching.
I love how took off Parking Brake and took the truck out of gear that it moved for you ! See how common sense works !? 666 OUT
You may think that, but no. i am honest and should have shown it was in neutral with not parking brake on. In fact, I will do it again for you tomorrow on my latest full size truck project. Please tell me you are subscribed so you don't miss it. Thanks for watching.
You guys Cotta have that truck anchored down, my 20hp hasqvarna has pulled my truck out of the yard axle deep before
Good
Thanks so much and thanks for watching.
Need to put water in the tires of the gt6000 it'll pull good then
Good idea and thanks for watching.
The zero turn had a higher hitch point. It matters that much . The duely would have the best traction with the highest hitch point.
I could try it again with the other mowers with higher hitch points... Maybe be a hitch point how to video. Thanks for watching.
wrong on the traction part unless you add weight because the more tire on ground less wight for traction. also the zero turn may have worked then but you will pay later they werent design to pull so your drive system wont stand up to the extra stress
The higher the hitch point the more weight transfers to the back wheels. If you can lift the front wheels while towing your at optimum traction. So twice the weight on the rear and twice the number of tyers makes twice the traction.
The main reason the zero turn won out was because it had the weight of the engine and a grown man riding on the tires and both tires were pulling. Those cheap mowers are super light in the back and the transaxles only give power to the free spinning tire
yeppers
Are all ur lawn mowers belt driven
All but the zero turn, I think it does something different. Actually I have never research under it, it may have belts too. Thanks for watching.
@brdman Yep, there are belts still under there. thanks for watching.
it's because the weight of the engine is on the drive wheels.
Exactly and thanks for watching.
The zero turn has weight for traction because the engine over the drive wheels
you are exactly right and thanks for watching.
Slow the speed down and pull lightly or take the truck out of park
It was not in park and the parking break was not on, that would have been cheating. thanks for watching.
Hydraulics are amazing.
Yes, this is fun to use too. thanks for watching.
You need more weight on the back your wheels will just spin and not dig for any traction
Yes, the zero turn has the weight in the back. thanks for watching.
Why would you use a belt powered mower to try and pull something other than its own wheels🤔
@@dayzmoderation2331 because why not
@@Nolife2013 where in the manual does it say call also pull cars lmao🤣
@@dayzmoderation2331 idk where does it say you cant
Where do you get your dirt devil tires and others?
I find most of my tires of Facebook marketplace, you just have to be patient and look daily. I had to drive about an hour to get the dirt devils. Thanks for watching.
@@chud327 love the channel
@@gray1137 Thank you!
Do you recommend I build a mud mower
@@gray1137 You will have to answer that, but I would say yes. They are cheap to get and modify and you can learn a lot messing with them.
You need to get a brush mower
I was actually thinking of working on that later today. Thanks for watching.
r
Hey chud, I live in Florida, where can I get mowers like this? I live in belleview and if you are willing to sell a mower with a vertical engine shaft then I will buy. I want a mower that I can put a predator 212 into and I can’t find any around Facebook marketplace that are worth it. Could you help me out?
you need to take the s-10 out of park to make it fair, wow fake news!!!! i did this exact test with my craftsman rider and my s-10, my craftsman pulled my s-10 all around the yard!!!
Fake comment!!!! the truck was not in park. Thanks for watching.
Was that the S10 that was going to get a v8?
That is the same one, thanks for watching.
What tires were those on your JD
Those are 22 inch tall Dirt Devils for 8 inch wheels. I love the way they look.Thanks for watching.
All the weight is on the rear on the tires
Yes it is and thanks for watching.
It's because the motors in the back
No, it's because regular tractors only have one drive wheel turning open differential, zero turn mower's have a rear end drive for each wheel and both wheels can get traction at the same time.
Yes, that helps and thanks for watching.
That helps too. thanks for watching.
a Bobcat mower
Mine is a craftsman made by MTD. There maybe Bobcat in there somewhere.
Somewhere there is man.Strong machines those MTD's. My brother has such a tractor , 13,5 horse and it is amazingly strong. The thing is the MTD is affordable and if you can work yourself on it for changing oil and belts and sharpening the blade it is a cheap machine. The motor is Briggs and as long it has oil on it it will run. MTD used to sell under their own name in Europe. Craftsman brand is hard to find in Belgium.
Nice, I love mine. I am currently painting the under of the deck and putting on new blades. Video coming soon.
Man you weren't even in mud ,you cut hillsides at a angle front pointing 2oclock rear 8oclock I can show u cool stuff man
Thanks for watching.
Not 1 pair o shoes in the lot of em
Yeah, that is typical around here... thanks for watching.
Watch out for Henri Henry
Thanks for watching
Hello I’m Brody
Hi, nice to meet you and thanks for watching.
need a kubota power
That would be nice and thanks for watching.
yeah i used to pull a 4 wheel dubble axle trailer with 4 cords of blocked up wood with a G2160 kubota wich it hauled like it wasnt even on it the little g2160 kubota was that strong powerful little diesel garden tarctor plus my kubota dealer gives a free 5 year warranty on them wich pretty good warranty for kubota mowers
Nice!
Michael Mac Tavish hell ya
My zero turn has duals...... on the front.
Sweet, where can we see that at? Thanks for watching.
All those other mowers would have pulled that truck as well if you would've put the truck in neutral.
I am not fake, the truck was in neutral the whole time. Thanks for watching.
Hi what's up👍😁
Not much, how about you? Thanks for watching.
Oh ok cool nothing much anytime thank you your video's are awesome.👍😁
My power king could pull that truck easily
It is probably heavier than my mud mowers. Thanks for watching.
Cutting wet grass it just burn the valves ,it put to much on the engine
So far so good, thanks for watching.
Rear engine lawn mower same theory as front-wheel drive car... More tire less traction, more weight more traction...
Sounds about right and thanks for watching.
Can you help me on my gt6000 caftan the belt want stay on when you drive
Is the belt too loose, can you put on some belt guides maybe. Let me know and thanks for watching.
Spin action
Yes and thanks for watching!!
Zero turn power
I love my zero turn and thanks for watching.
Fajna to maszynka
I don't know what you are saying, but thanks so much for watching.
What is Even wrong with that s10
Security system problems and it really needs a V8. Thanks for watching.
Hi
Hi and how is it going?
Hey.....its a Big Scheissendreck...for Jet....
I don't know what you are saying, but thanks for watching.
Need more weight and that truck would move with no problem
Weight equals traction and thanks for watching.
Dude say you will Park the car on 4step treads to stop the wheels sinking a tad into the lawn . Plus a mechanic told me that those zero turns are Not made for towing . Buggers up the drive motor and then you are looking a big money. The school I worked at got rid of the slower mini tractor mid mount deck and spent up and bought a zero turn . Couldn't do anywhere near the amount of work we used to
I try not to pull stuff with it, but sometimes I can't resist. My zero does more work faster that my old bigger mower... Thanks for watching.
@@chud327 Heck I know that they are quick and cut well. I've used a big Husqvarna
I went from a tractor that was 52" to a zero turn that is 48" and I still get done about an hour sooner than 52"...
some one is going to get hurt while not wearing shoes my brother cut his foot open that way
Only one had a mower deck and I had shoes on. I get what you are saying though. Thanks for watching.
@@chud327 he cut his for open on the frame
So is it like cool now or some thing
Or something, thanks for watching.
Tengo un murray que banda. Lleva del motor ala transmicion
Thanks for watching
It’s pretty impressive to get 2 million views off a 3 min video lol
me too and thanks for watching.
Ela é muito barulhenta
I don't know what that means, but thanks so much for watching.
Kınık
I don't know what you mean, but thanks for watching.
It keep wearing out after ever three hours
Sounds like something may be out of alignment...
Why I don't buy used garden equipment. Asshats totally abuse and flog to unsuspecting buyers.
This one is not even for sale, were you going to steal it? Thanks for watching.
Or make one for you small mowers
Will try to get to that today.
Get a Briggs
do you mean it need dual Briggs on it? thanks for watching.
Mándame uno
I don't know what you said, but thanks for watching.
+chud327 cristofer said "send me one" in Spanish.
uMatt Arias thanks for the translation!!!
Lawnmore usesd belt they are not for pulling
Yeah, I don't usually pull with it, this was just and experiment. thanks for watching.
TMu
Of course the zero turn will pull that truck is because it hydrostatic not belt gear box like the other junk riders!
The John Deere is also a hydrostatic and it didn't move it. I think your theory needs work. Thanks for watching.
LESTER ABRAHAM
Thanks for watching!
Lol if you start off slow, you can pull most things. Completely wrong, as the lawn tractor could have pulled it if you started off very slow
Chud my birthdays in 3 days can you give me a massive shoutout
Your birthday is Saturday? Mine is Sunday! Happy birthday to us and thanks for watching.
chud327 haha nice no problem nice video
Bbmjcmi
I don't know what you mean, but thanks for watching.
Nissu
No, not a Nissan, it is a Craftsman. Thanks for watching.