BMW E36 Efactory Coilover Install
Vložit
- čas přidán 10. 09. 2024
- PLEASE READ FOR ADJUSTMENT CORRECTION:
REAR ADJUSTMENT WAS EXPLAINED WRONG IN THE VIDEO.
The rear shocks should be adjusted for bump stop so that you don't bottom your chassis onto the spring perch/upper arm. The springs are what adjust the ride height, if the car isn't low enough, remove the adjustable collars and run just the bare spring.
In this video, I install some E-factory coilovers in my BMW E36 drift car.
E-Factory Drift Parts: bit.ly/2YRJqoT
et
Thanks For Watching!
Support the Channel by Subscribing, Liking, Commenting, and Sharing!
Subscribe: ❤️️ bit.ly/2QXVSUK
Social Media:
Instagram: @ShayneAndrew @Fanboyz_drift @efactorybmw
Thanks for Watching!
Great video man just got my angle kit from e factory with your promo and nice to see other islanders on youtude. Im from campbell river. From the video looks like your in nanaimo? Maybe see you at the speedway soon
Thanks for watching and supporting the channel! I am in Victoria
Great video! 🔥
Thanks 🔥
You are adjusting the ride height wrong. You do it with the spring and set your preload on the spring with the strut. Your rear will have much more travel and more grip if you do it that way.
Okay thanks I’ll have to update it.
I have been trying to find a video and or someone who knows how to install a coil over. So with that said how do you do it with the spring. @ Kenny_Stuntz and @Shayne Andrews?
Hey Shayne! I just got my first drift car (04 325i). Thanks for showcasing the efactory parts! I can't stand having to order parts from the USA so often, especially performance parts.
No problem! Thanks for watching and feel free to message me if you need any help 👍🏼
IG @ShayneAndrew
Hey man, can you please give me the info on where to get those side skirts for my sedan!? Please!! Thank you
You can’t buy them anywhere but the good news is they are cheap to make. They are just roofing flashing with two bends. Any sheet metal or roofing company can make them for you and then just paint them to match your car 👍🏼
@Tenmill Garage ahhhh thats super good news ! Thanks man, gonna run w that info!!
Great video! I had borbet type as on my E36 a while ago, though they were 16s from the 90s.
Thank you! Type A are my favourite wheels and I’m sad I hit one of mine but it could be worse. I had some 16s on my mk2 Jetta a few years ago too. Where you from John? I’ll get you entered in the efactory decal giveaway!
Awesome video buddy!, I always watch your videos! I'm from Nelson, but you know that, hope your doin good!
Thanks buddy! Miss you ❤️
this will come in handy when I lower my car!!! is this the coils you recommend? I thought about bags but bags are for groceries.
I highly recommend these coilovers and you’re right… bags are for groceries lol.