How to install Harris bipod stud on Blaser R8 rifle
Vložit
- čas přidán 5. 09. 2024
- Support RoeStalker - become a Patron!
/ roestalker I usually don't use bipods apart from zeroing, but had a Harris 9-13" swiveling model gathering dust, so decided to start using it again.
The problem with Blaser rifles is they don't come with standard bipod studs and I had to mount an adapter in order to use a bipod. The adapter is a Blaser component that can be sourced from your local Blaser dealer. The assembly is quite straightforward as shown on the video.
Please subscribe to my channel: www.youtube.com...
Visit my channel: / gregloginway
Visit my deer stalking blog: roestalker.co.uk
Zykle nie używam dwójnogów, z wyjątkiem strzelnicy, ale miałem dwójnóg Harrisa kurzący się na półce i postanowiłem zacząć go używać ponownie. Problem z Blaserem jest taki, że niestety nie ma standardowych bączków i nie da się zamontować do niego dwójnogów Harrisa bez montażu specjalnego adaptera.
Adapter jest dostępny u dealerów Blasera. Montaż jest prosty, tak jak pokazano na filmie.
Subskrybuj mój kanał łowiecki: www.youtube.com...
Mój kanał myśliwski: / gregloginway
Mój blog o polowaniu: roestalker.pl
I'm surprised the R8 stock doesn't come with swivel studs already. I'm glad my Tikka came with them, I would probably screw up doing them myself.
Blaser has a swivel in a different place (end of the forend). They dont do typical studs. They do sell their own proprietary mounting system and Spartan bipods and modification is quite easy, but as anything Blaser, it's a lot of money. I just wanted to use an old Harris that was gathering dust.
RoeStalker Well fair play to you for having the bollocks to take a drill to what is a very expensive rifle!
It's nice but only a tool after all ;-)
Great Video!! I love your content. The filming is top notch and the content is always worth watching a couple of times!
Thanks! Glad you like it
Brilliant info thanks
Thanks for posting, the ominous music was a very nice touch. :)
Thanks for this nice tutorial!
+Driven Hunt Action Glad you like it
Swietny film instruktażowy!
Zamierzam zrobić dokładnie tak samo w moim Blaserze, może Kolega podpowiedzieć gdzie nabył taka śrubę pod bączek? Znajduje tylko z gwintem do drewna, mam problem ze znalezieniem z gwintem do tworzywa.
Z góry dziękuję za pomoc.
Z myśliwskim pozdrowieniem
Darz Bór
Kupiłem od dealera marki Blaser z UK
nice!
Glad you like it
Im going nut, my bipod doesn't lock when open and it folds backs forward when I aim upward causing the barrel to drop. It's very hard to use, any solution???
Anyone else waiting for Mike Myers to show up?
Witam czy da się zdemontować szczerbinkę z lufy blasera?
Hi Mr Roestalker. Was very interested in your reloading videos I have a R8 black addition in 30 06 nightforce scope and playing with different loads combinations bullet manufacturers etc. What did you find to be the best grouped powder/ load
Thank you for your videos I like them a lot
+Trevor Smith My R8 is. 308 you can find two different videos showing my favorite loads. I also reload for. 30-06 combo gun and use the same bullet 180gr Hornady RN over N160 powder.
What bipod stud is this? And where did you get it? Great video
This Blaser part and you can get it from a decent Blaser dealer
Hello. Is youres r8 stock made for mach barrel? It seems there is some free space between barrel and stock. Lile youre vids. I also have blaser r8. Mine is standart model with wooden stock in 30 06 cal and zeiss victory ht on it + meopta 1-4 for drivens.
+Wai Kru Yes it is for a match barrel. Nice setup you have there. Thanks for watching my vids
RoeStalker: I looked at every site I cold find with no luck. I found a substitute that has a 7/8" stud. Think it will work? I hate to ask this but how long was yours?
+anthony Landino I don't think you can find it online. Blaser sells their proprietary magnetic bipod system so don't advertise it. Certainly you can buy these from Blaser dealers in the UK if you ask for it. I am away so can't measure it for you at the moment sorry
I would be putting a dab of thread lock Greg.......Tim
That crossed my mind as well, but I was told it is not necessary. If it comes loose will do. I dont think I will be using it that much anyway :-)
I have done a lot of tec diving to 100mts and we don't do "If it comes loose I will fix it"
Lol Got a kidney stone bumping around my bladder so not a happy Essex boy at the moment
Sorry to hear that must be painful
Yes a lot.........
Helloo. Where can I buy such a thing for my stock?
My stock is R8 Professional Success Standard.
thanks in advance
As description says, it is a Blaser part, so contact your local dealer.
What swivel kit did you use?
+anthony Landino blaser.
Nice video but where can I buy this swivel bolt? I did not find it on ebay or somewhere else.
Any Blaser dealer should have it.
Better late than never: sportwaffen-triebel.de/en/blaser/adapter-professionalsucces/-harris-2-bein
for what you need this??
Not that I really need this for hunting, but it is convenient at the range and shooting prone longer distance
Not More Videos??:(
+Johann wamdel Please be patient... Nothing to show at the moment but will upload something in the new year
mam pytanko po co ci jest ten dwujnug
Trochę fanaberia, ale przydaje się na strzelnicy. Szczególnie jak się chce postrzelać leżąc na większe odległości.
Mam pytanko a gdzie jest taka strzelnica np po wyżej 200 m
+kubolt5 Z tym jest problem, myśliwskie strzelnice są jakie są... 😩 Koło Warszawy to Góra Kalwaria 300m
Ok dziękuje
ok
Will fit it with an .30-06 semi-weight barrel?
Dont know dont have a heavy barrel
And what size did the drill have?
ooooooo
ilove you man
aa ok More for funn?
You can say that :-)