This video is really so I can cut and paste a link to email questions. If you are not in the Blaser gun scene, just skip this video. You'll be bored to tears. -Marky
Not bored to tears. Sounds like good information to me. Even though I don't have a Blaser. All information from real users is a good idea to keep learning. Wait did I just comment without giving you a hard time? I must be slipping 😎 Keep up the good work.
This video is somewhat out of date as the rifle configuration has changed since it was published. The bipod shown here is called a NEOPOD. It's made of a super lightweight, and expensive, polymer. More suited for mountain sheep hunting than regular precision rifle work. Glad you liked the video. These days the R8 resides in a GRS Ragnarok chassis. -Marky
Hi there im fixing to buy a blaser in 300 win mag with the same bolt face can you please tell me What different caliber can i run with the same bolt face ? 22-250, 308, 223, ect 30-06 and 7mm rem magnun?
I don’t see why not. But it still would’t work better than just leaving them bone dry with factory coatings. Blaser factory nitride is very slick. Regards, Marky
I’ve played with an ultimate at a show a while back. It seem to recall it had A LOT more factory adjustment with some pre-set options. Also...the Ultimate uses a two pieces stock set that you find on the fancier wood options. The success uses a simpler one piece stock. I.e. The ultimate you can see the black receiver with gold R8. Both systems use the same magazine format. My Professional seen here uses a different, earlier magazine format. Functionally they are all the same. But the two you suggest are locking you into a thumb-hole stock I believe. Finally...forgive my location statement. 90% of the traffic we receive on Blaser videos is out of Europe or Australia. It’s the #1 selling bolt gun in multiple European countries. Recap: if money no object, and you like slick adjustability, with a thumb-hole stock, take hard look at the ultimate. You’ll be happy. Regards, Marky P.S. We are in Ohio.
@@John1911 The content is good. The video presentation is well... For example, shaking your finger close to the camera in the beginning is visually annoying.
This video is really so I can cut and paste a link to email questions. If you are not in the Blaser gun scene, just skip this video. You'll be bored to tears.
-Marky
Not bored to tears. Sounds like good information to me. Even though I don't have a Blaser. All information from real users is a good idea to keep learning.
Wait did I just comment without giving you a hard time? I must be slipping 😎 Keep up the good work.
Thanks, Gary.
M
Practical video and very good conclusion about cleaning bolthead! Can you please tell me, which is the bipod model on yours rifle? Thanks!
This video is somewhat out of date as the rifle configuration has changed since it was published. The bipod shown here is called a NEOPOD. It's made of a super lightweight, and expensive, polymer. More suited for mountain sheep hunting than regular precision rifle work.
Glad you liked the video. These days the R8 resides in a GRS Ragnarok chassis.
-Marky
Another Blaser R8 owner with a mekuginuki. Likely a rare combination.
Ha! I had to look up that word. I thought it might be some kind of curse!
Yes. We use that item on our workbench since it’s brass.
Marky
Congrats with new Blaser! Personally I also prefer keep it dry, finish is so good no reason for additional lube
Yup. We’ve run this r8 since maybe 2011 or 2012 I think.
Hope you enjoyed the video.
Marky
@@John1911 Yep, I did :) this R8 first time appeared at your channel thought it's new.
The video stuff is still kinda new for us.
😊
Marky
Fantastic informative video thanks for taking the time for us 👍🏻
You are very welcome and thank you for watching.
Marky
Hi there im fixing to buy a blaser in 300 win mag with the same bolt face can you please tell me
What different caliber can i run with the same bolt face ?
22-250, 308, 223, ect 30-06 and 7mm rem magnun?
We will have chart on our website in a few days.
Marky
Hey I have a question would a dry graphite style work on the rails? Not sticky dry and wont freeze
I don’t see why not. But it still would’t work better than just leaving them bone dry with factory coatings.
Blaser factory nitride is very slick.
Regards,
Marky
@@John1911 wonderful to know thank you
Did anybody shortened blaser r8 succes stock?
What do you mean? The length of pull? I’m sure Blaser can do it.
-Marky
@@John1911 stock lenght i mean
I need shorter stock
Either change your recoil pad or call Blaser and have them cut the stock back. -Marky
Thanks for making this video.
I just purchased an R8 pro and this info is very useful.
+1 thumbs up.
Glad you like it, Shoots. I saw your purchase on Blaserbuds.
Marky
Wtf with the dislike? Im browsing CZcams for Blaser R8 and Kriegoff Semprio videos and cant see any reason for dislike.
Eh. It’s the internet. I appreciate your comment however. So that helps.
Sincerely,
Marky
Where are you located?
We are located in the United States.
We are also not open to the public.
Regards,
Marky
@@John1911 duh ... I am in USA too. I want to get more information on r8. Can you tell me which one is better between ultimate and success?
I’ve played with an ultimate at a show a while back. It seem to recall it had A LOT more factory adjustment with some pre-set options.
Also...the Ultimate uses a two pieces stock set that you find on the fancier wood options.
The success uses a simpler one piece stock. I.e. The ultimate you can see the black receiver with gold R8.
Both systems use the same magazine format. My Professional seen here uses a different, earlier magazine format.
Functionally they are all the same. But the two you suggest are locking you into a thumb-hole stock I believe.
Finally...forgive my location statement. 90% of the traffic we receive on Blaser videos is out of Europe or Australia. It’s the #1 selling bolt gun in multiple European countries.
Recap: if money no object, and you like slick adjustability, with a thumb-hole stock, take hard look at the ultimate. You’ll be happy.
Regards,
Marky
P.S. We are in Ohio.
@@John1911 thanks 🙏
But…a photo of my late grandfather makes an appearance. ;-) -Marky
I dont understand why this has a negative like/dislike ratio
Ha!
I hadn’t noticed until you pointed it out. 🤷🏼♂️
No telling. But thanks for taking the time to watch our video.
Sincerely,
Marky
@@John1911 The content is good. The video presentation is well... For example, shaking your finger close to the camera in the beginning is visually annoying.
Understood. We are always striving to be better. It’s been a journey and a process.
Regards,
Marky