4Runner TRD Pro Eibach pro lift kit spring install
Vložit
- čas přidán 7. 08. 2020
- I am installing the new Eibach lift springs specifically for the TRD Fox shocks on my Toyota 4Runner TRD Pro. Both front and rear spring part number E30-82-071-03-22. This kit is supposed to give you 1.6 inches of lift in the front and 1 inch in the rear while keeping the factory Fox shocks that came on the 4Runner TRD Pro. Please like and subscribe for more Toyota 4Runner content.
Measurements
Before w/ stock tires
From ground
FL 35
FR 35 1/4
RR 37
RL 36 3/4
From center of hub
FL 20 1/2
FR 20 3/4
RR 22 3/8
RL 22
After w/ stock tires
From ground
FL 36 3/4
FR 37
RR 38
RL 37 1/2
From hub
FL 21 3/4
FR 22
RR 23
RL 22 1/2
Will have 285/70R17 Nitto Ridge Grapplers installed and a review in the next video so please subscribe. - Auta a dopravní prostředky
i just installed these springs on my 2019 4R TRD Pro and love them. crazy how one can end up with an inch of lift front and back by just adding $340 springs. i like the ride better than with the OEMs. there's less body roll and front-end dive with the Eibachs. a nice cosmetic touch is to have all 4 springs be red; i dig the red accents in my blacked out truck.
What size tires did you get? Do you still have the 4Runner?
Can't wait to hear some longer term reviews.
I got my buddies 2020 fox shocks and I ordered this springs also can't wait to install it on my 2020 ORP.
Awesome video, I’m about to look at your next video about tires…..thank you
Good work for sure. thx for showing. getting ready to do my 2022 trd pro.
@james c how did that go? I also have the same exact ride as yours and would like to know how yours went. Did you have to upgrade the UAC? Thanks in advance!
@james c how did that go? I also have the same exact ride as yours and would like to know how yours went. Did you have to upgrade the UCA? Thanks in advance!
I had the same problem with my Mcpherson compressors. They work but challenging to get in and out between the springs
Awesome lift! Could you let me know what the height from ground to the top of the rack is?
Looks great man... Thier website shows silver coils... Did u specify red coils?
nice!!
you’re awesome
With this spring setup, ill also be adding a winch and front bumper - combined weight about 130lbs. Will it sag the front or does eibach sell heavier load front springs?
can you tell me why you went with springs instead of new struts? was it to handle more weight?
Two questions. Hi is the ride quality compared to stock? Also I am considering doing exact same front springs but their ride height adjustable rear springs as I have RTT with awning so probably 225 lbs up top. Looks like you have been able to get the 285 70R17 tires to fit without rubbing and this amount of lift, do things clear at full flex and full lock, or are spacers required? Thanks.
Will this kit work with the Bilstein shocks that came in the 2018 4Runner TRF pros?
Sure wish the Pro Truck lift for the Tacoma had the red springs. I just like the look of them vs. the silver. You listening Eibach?
Ruwy but he 2 rt height ttt57jjjjrjuu up u7 u7rihh.aqeee. 7otrrrrr lol 4r
Do You happen to the know the torque specs? I’m going to attempt to install mine soon
Awesome, Thanks for the video. I have my new Eibach springs waiting to get installed on my AG Pro. I seen the measurements on the lift just double checking. Did you get more than 1.6 in the front? Thanks.
Don Russell It seems like it’s right at 1.6
Baka180 thank you Baka180, forgot to ask is the skid plate needed to be removed to do the shocks? I see you have yours removed?
It had to come off to loosen the front lower control arm bolts
hello wherev did you get the kit with front and rear trd pro springs i can only foind the front on toytec site no rears at all
A shop in Colorado quoted me $700 to do this install. Does that sound reasonable or way too high to you? What would you expect a shop to charge?
How’s the ride quality?
Baka180 now that you’ve drive it for a couple of weeks does it still have the same measurements? From wheel to fender.
Just went out and checked doesn’t look it’s dropped at all. Still the same with 3/4 tank of gas vs just over 1/2 tank when I first measured.
Thank you
I have the same color, I have the cornfed spacers sitting in my garage, but I think I’m going with what you’re did.
Any issues with the stock upper control arms?
No issues. Alignment got within factory specs.
Did you need a sway bar relocation
No
Bro is this the 2021? (based on the roof basket)
2019, first year for the changes to Fox and roof rack