Can you make some little stickers and banners for the RC cars Would be really cool to have HP sticker on my Malibu body and my Octane 🙏🙏👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍
Lovin the rc content. I'm not really an enthusiast aside from my buddy having a Nitro Traxxas in high school. But you're makin me want to buy a battery rig!
Can't wait to see what you think of that esc. They all had awesome specs just scared to dump $300 on a esc without knowing more about the product quality.👍
Jack what brand of rear tires are those ? I'm getting a pair of Hoosier dirt track tires, some of the places I run are less than perfect I think SC or DT might have an advantage over slicks so we're going to test them.
Curious to know what the resistance is on that battery,several reviews claim very high resistance. I always like Gen ace but haven't purchased a new battery in quite some time.
Hahaha, I have the same Malibu body. Did a pearl white with M 80 decal sceme. Also have the Grand National body on a different car. I love my G bodies. Own two in real life.
Jack I have been working on my 2wd slash based drag car and I’m running 2.7s at the moment. I haven’t really turned it up yet, the timing is only 10*. I’ve been trying to find someone in my area to make some runs with. Let me know if you want to use that timing system. GNSS only goes so far.
Nice upgrade wish I live closer to you I would line it up I run a tlr 22 bullet with tekin rx8 and a motiv 2.5t motor best time in 132ft is low 2 high 1
Curiosity is Killin me cat... Does it have the rear travel to justify that much rear toe in? Or does it just look way more toe'd in than it actually is? I know it's not going to make giant difference and will make it want to walk more than dig straight. Just thinking you may be missing middle to top end from too much bite because of it... I know it's a fine balance.
I’ve been rc drag racing “no prep” since before it was ever a thing in rc. Check my oldest videos! I have a Nitro Jato converted to no prep dragster i built about 9 years ago.
Love these videos more than the big car content well as much as the rotary stuff anyway
Hell yea cant wait to see the new shell on and how you paint it! Hope you do a painting vid too
It’s a gray color but i wanna do some kind of graphics.
Loving these vids Jack! I just started building my dr10 and loving it
Awesome!
Nice
Can you make some little stickers and banners for the RC cars Would be really cool to have HP sticker on my Malibu body and my Octane 🙏🙏👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍
That drk is awesome.. great choice
Hell yea
@@JackCecil Let me know we'd like to buy the 1st batch
@@JackCecil brother i need some on my slash
Loving the rc stuff atm mate awesome
Just bought a Traxxas Hoss today can’t wait to upgrade it
Hell yea!
Good job explaining
Like that Chevy Malibu Body. Looking forward to what color you chose. Friend of my just sold his 87 Buick Regal, something about those old box cars
Loving the content
Lovin the rc content. I'm not really an enthusiast aside from my buddy having a Nitro Traxxas in high school. But you're makin me want to buy a battery rig!
You’ll love it!!
@@JackCecil any recommendations for a newbie setup? Hell that would make a good video imo
Get a Slash 2wd! They’re great off and on road when set up.
Or a maxx
This brings me back to the 80s.... building a slot car and going to the hobby shop Sunday morning before the bowling leagues! ;)
I love the 67-72 C10/K15 body style, probably my favorite truck, but that width is throwing me off. Stoked on the Gbody Malibu!
Love it Jack .
keep the great work man
I just got a Drag Slash and I am very interested to see how your mods work out. Subbed.
So far so good!
That Gbody is Amazeballs!!!!
Great choice on the esc
I hope so!
Just got my velineon motor and esc for my 1/10 drag slash conversion build cant wait to run it on a 3s lipo with some street tires
Get some belted tires! Trust me!!
Rc videos are so cool, I hope this get more views
Share it!
Can't wait to see what you think of that esc. They all had awesome specs just scared to dump $300 on a esc without knowing more about the product quality.👍
looks like a great setup for the drag slash! What is that charger your using to top off the battery?
Hey love the car great videos what gear ratio you running on your slash?
check out the hobbywing xr8 pro with the ota programmer, trinity holeshot drag motors, gens ace redline batts, pro line belted reaction tires
Ah I have a bunch of old McAllister bodies, really cool stuff. Let me know.
Jack what brand of rear tires are those ? I'm getting a pair of Hoosier dirt track tires, some of the places I run are less than perfect I think SC or DT might have an advantage over slicks so we're going to test them.
Curious to know what the resistance is on that battery,several reviews claim very high resistance. I always like Gen ace but haven't purchased a new battery in quite some time.
Hahaha, I have the same Malibu body. Did a pearl white with M 80 decal sceme. Also have the Grand National body on a different car. I love my G bodies. Own two in real life.
I’ve had a few myself!
Hey do you have problems with air getting under the truck body making it parachute?
Jack I have been working on my 2wd slash based drag car and I’m running 2.7s at the moment. I haven’t really turned it up yet, the timing is only 10*. I’ve been trying to find someone in my area to make some runs with. Let me know if you want to use that timing system. GNSS only goes so far.
Yes I’ll be doing drags With the dts again soon! I’m almost done dialing in the chassis.
Did u have to change the front shock tower or lower the mounting points
Subscribed
Awesome
If youre looking for a little crawler, the Scx24 is a fun little rig.
Hey Jack Ive seen ppl put fishing line around the back tires to keep them from ballooning ? Might help
The belted tires work perfectly. No ballooning.
it's also been far too long since we've heard any Scooter Brapps ;-)
More to come
Any chance you show how you adjusted the toe & camber, new to the whole Drag world & own the same one,
I used a straight metal ruler on a glass table.
What are you using for battery connectors?
Nice upgrade wish I live closer to you I would line it up I run a tlr 22 bullet with tekin rx8 and a motiv 2.5t motor best time in 132ft is low 2 high 1
1.19? Rofl I think you have a typo
Sounds like a good run for my funny car!
Speed 🤘
Sponsored by me.
Race me jack got my rustler ready to go
Post a video!
I had a very unique Malibu for a few years. Four door, V6, 3 speed manual on the floor. Lol. Very rare, and unique, not valuable though.
Are you looking to run in a certain class? Just wondering why you're sticking with 2 cell and not going 3 cell?
Yes it’s a class for 2s Short course truck-based vehicles.
Can you tell me the make and model of that charger please..
I have the same charger lol. Cheaply but goody
It’s always been good to me
Are you running foams in the tires
I have a set with and a set without to test with.
Can it do rpm filtering ???
The toyota hilux in the back i know my boi jack real rc guy scale rock crawers awesome
Yep yep!
Can we have a rc collection tour ?
Check your front shocks one is shorter than the other
Curiosity is Killin me cat... Does it have the rear travel to justify that much rear toe in? Or does it just look way more toe'd in than it actually is? I know it's not going to make giant difference and will make it want to walk more than dig straight. Just thinking you may be missing middle to top end from too much bite because of it... I know it's a fine balance.
Show ur rc collection i wanna seeeeeee
Like 50 of them
How much was that Esc
😎👍🍺
Did someone watch the 1320 rc cash days and get the rc car itch?
I saw it
I’ve been rc drag racing “no prep” since before it was ever a thing in rc. Check my oldest videos! I have a Nitro Jato converted to no prep dragster i built about 9 years ago.
Motor KV is 1000 rpm per volt right?
10,000 rpm/v
@@JackCecil got it
Would you comment on Rudnick's decision to leave Florida
Where the rc 10 at jack or the clodbuster
Man i wasn’t rich enough as a kid to have a Clod! Lol. But i did have an rc10.
I don't anymore sold off all my rc cars when I had children want to get back in to the hobby again one day
Just can't afford a experiencive habit
Hi
It’s possible to hit 50 I hit 55 on the high speed pinion everything els stock on 3s
Snake content please
Bro bring RC videos back
Dude just start a new channel for all the rc stuff.