Video není dostupné.
Omlouváme se.
Benchmade Adira: Big Magnacut Folder - Preparedmind101
Vložit
- čas přidán 2. 07. 2024
- *WAYS TO SUPPORT THIS CHANNEL*
LINKTREE (All My Links and Contact Info. First Link For Membership): linktr.ee/c.ta...
AMAZON:
tinyurl.com/AMA...
PM101 Affiliate: DLT Trading:
bit.ly/PM101DLT
WAZOO PM101 AFFILIATE LINK (gives you 10% off):
www.wazoogear....
ONEWIND HAMMOCK GEAR: www.onewindout...
AND Coupon Code "PM101" (5%)
The knife sharp program actually does more than just sharpen the edge. They tear it apart and replace, lube etc any parts that need replaced. The couple knives I sent in came back way smoother than I could get to be.
Or, for less than half that price, you could get TWO Bestech swordfish-es with 4" magnacut blades and G10 scales at knifecenter.
To me, this is an Adamas-sized knife with a blade that can actually cut - thinner and not coated with that horrible asphalt-looking junk. I’m down for it.
I swear to god, in a very nice way, that with that ball cap you look just like Gomer Pyle! 😂
The pocket clips was found to rust. I switched it out for a Lynch ti clip. One CZcamsr tested the HRC and I believe it was right around 60 which was a little disappointing.
I love the adira but I noticed some small spots of corrosion from just carrying it in my pocket. Blade grind is a little wonky too.
It is a Griptilian with a Magnacut blade for a $100ish premium in a box with billboarding from the marketing department.
cool
Kershaw Leek 2 color ways , very pointy Magnacut
Heavy duty? Have they done something about the weak stop pin? The new ones have a stop pin held together by tiny screws that get sheared off easily. The old Griptilians had a big stop pin machined into the frame.
Personally, I prefer Spyderco's salt series over these new Benchmade salt knives👍 A Spyderco Native 5 in Magnacut is significantly cheaper and more noticeably more slim and easier to carry.
It's the first Benchmade I've wanted in a while. It's reasonably priced, which is odd for them lately.
Competition is fierce out there these days🤜
Love your content. Even if I was rich I would never pay bench made prices, for a pocket knife.
Magnacut needs 64 and up HRC
Hello Chris, looking good, for sure! Keep up the good work and vids. I've always dreamed of finding and marrying Ms. Right, I kust hope her first name isn't "Always "!😊 Be safe and take care, "God Bless", sincerely, Randy. 😇🙏👊
Nowadays pocket knives are becoming a luxury item in this economy
Hot go deeper.haha. I was looking at this knive hard..I seen there moving good.
I heard the rock well is 61 62.that works.
No 62 - 64 is where it should be . At least for all round use .
I like it! Still $250.00 a little pricey.
3.88 blade length just sneaks under NY law 😂 woo hoo I can take it to the beach - the only place I’m allowed to 4x4 🙃
Spyderco's FRN feels a lot more sturdy/robust than the grivory scales on new Benchmade Adira and mini Adira👍
Thanks
I like the color but if used in “deep” water, I believe orange would be a better choice just in case.
Never forget what Benchmade did! That's one Oregon company that can suck it! 2A is more important than a brand name.
Oh FFS! Let go. Lending local cops a grinder isn't the ATF kicking in your door. Stop getting caught up and triggered in these fantastical hype stories. A company that makes tactical stuff made for killing people is anti-gun... Do you even hear yourself? THEY LENT LOCAL COPS A GRINDER! YEARS AGO. You sound ridiculous.
BM is going DOWN! Mark my words… quality and price caused it… similar to COLD STEEL. Both are not liked as before! Facts not opinion. And add this too … MAGNACUT is grossly overrated.