Traxxas Ford GT 4-TEC 2.0 STRC Upgrades - Netcruzer RC
Vložit
- čas přidán 30. 09. 2017
- Traxxas 4-TEC 2.0 Ford GT Upgrade Time. Installing some STRC carbon fiber shock towers and STRC aluminium motor mount. Then trying to get proper track width with some new tires. Want STRC stuff? USA: amzn.to/2xQuk8x CANADA: amzn.to/2xUbRbG ALSO you can use discount code 'netcruzer' at checkout at STRC www.teamstrc.com for anything sold on their site.
Want 4TEC stuff? USA: amzn.to/2g1V3Wm CANADA: amzn.to/2vp3wMz [click show more]
Follow Netcruzer on other Social Media Sites:
Facebook Page: / netcruzer01
Instagram: / netcruzer
Twitter: / netcruzer - Věda a technologie
Hey Netcruzer subscribers! Now you can get a 25% discount at STRC www.teamstrc.com with coupon code 'netcruzer' at checkout. The code is reusable and good for anything sold on the site.
The carbon Tower takes care of the flex.
The cat wants to kno wat the hell is goin on!! Lol 😂
It is to take out the flex (the polymer towers to flex) while being lighter than Aluminum
Nice upgrades man👍👍👍
+Kenny mph Melanko thanks I may just try the 26mm foams on the rear and do a speed test with those. My action drift video is up now. czcams.com/video/wneBAoHaK7k/video.html
Towers take out the flex so the shocks do the work. :)
Yeah, but stock parts seem pretty strong as-is. I wasn't expecting it would add so much weight. Use the strongest lightweight material then you need lots of heavy hardware to align the shocks. LOL
L Joel I agree with you Joe the carbon fiber shock Towers. The flex so the shocks can perform better
I ordered aluminum shock towers for GPM.
How do u install the sway bars for this car
The 4-tec can be use to race in 1/10 touring cat? Do you try it? Thank you! good vid :)
Has the wheel offset issue ever been "solved" yet? The Stampede hexes are 7mm, could you run 9mm hexes and a thin shim? Would enough axle thread be left to mount wheels? This is one thing keeping me from buying this car, the lack of ease of wheel swapping. I'm trying to find a solution to this issue before I buy anything.
Substitute clear nail polish for CA glue
I do complain quite a bit in this video, so apologies if that annoys you. I try to be positive about RC but when I encounter something I don't like I tend to mention it. Anyway.. it's a FUN car, even if aftermarket wheels are a PITA to get right.
By any chance have you measured the backspacing of the stock 4 tec wheels? I'd like to know for my roller build. www.rc-race-and-drift-japan.com/index.php?main_page=page&id=20
If manufacturers would list their wheel offsets then it's easy to figure out what backspacing to buy the first time. I found this and it gets backspacing issues in the ballpark. www.rcuniverse.com/forum/rc-drifting-304/11109670-hpi-wheel-offsets-stated-vs-actual-measurments.html?styleid=3
Netcruzer RC TECH CARS to fit the blower, maybe angle the motor so the wires run along the side
You would be better off to use bsr foams and be happy. I've always had that clearance problem with contacts.
Adjustable turnbuckles....
Someday yes.. the VXL chassis only version does have them, plus some other stronger parts. I'll try to get those parts eventually.