eBay Arrow High Exhaust Tenere 700 - Brief Overview and Sound Clips
Vložit
- čas přidán 27. 08. 2024
- eBay Arrow High Exhaust Tenere 700 - Brief Overview and Sound Clips Bike Details:
2022 Yamaha Tenere 700
Dubya Wheels
Haan Hubs
Excel Takasago Rims
Arrow high exhaust
Dominator header
DynoJet Tuning
Cycra Handguards
Acerbis chain guide
Quadboss single row auxiliary light
Eastern Beaver Power Harness
IRC M5B EVO rear tire
Dunlop Geomax front tire
SKF seals
Black Dog Cycle Works helipad rear rack
HammerLEDs
AXP Skid Plate
Outback Motortek Crash Bars
Just ordered this exhaust, looks really good and I like that you don’t have to cut the subframe like the camel high exhaust.
Thanks for the sound clips!
the squeekieness comes from the screw-hole in which the db-killer screws in. The hole acts as a whistle. Just put the screw back into the hole without the insert and the annoying sound should be gone.
“Intrusive thoughts, always.” 😂
Thanks for the video! I'm going with this high exhaust for my T7 as I can see a huge advantage is the exhaust pipe is further away from the swingarm. Which is the best from everything I've seen so far.
Be mindful, I learned that my (and several other's) brake caliper can hit the exhaust can at full compression.
@@BillMcPoyle thanks for the tip. I won't be doing heavy off-road but will definitely have it in mind. Thanks!
Many thanks for your review and purchase, we're glad you like the product Genial Motor is at your disposal anytime.
@genialmotorspecialparts3571 are these compatible with 2024 models?
@@lepepe1602 Hello, yes it is 100% compatible, thank you
Thanks for the video! I'm deciding between the Arrow and HP Corse high exhausts but I think I might go with this one as well...
Solid ripper now paired with Dominator header
Sound amazing
Tail tidy might reposition those indicators you think?
Certainly would. I have not melted one. Jumping the bike and bouncing around trails has the indicator hitting the exhaust tip but that's all
Thanks for the video ! Is it easy to install ? Did you had to cut something or is it’s bolts on? Planing on getting this
Entirely bolt on. No cutting no nothing. Remove slip on clamp joint bolt with header, remove OE bolt at the subframe mount. Bracket goes up where the plate fender goes, reinstall on reverse and voila.
Is there a spark arrestor for this setup?
I purchased the camel ADV spark arrester and it did not fit. After I did some poking around I realized that this tube is only a 46 mm diameter and the camel is 51 mm diameter.
Which model or buy link of thoses indicators please ?
These are HammerLED signals. Pretty trick and very bright.
Compatible with side bags?
Oh yes. I normally run GIVI GRT709
Is it very different to the HP Corse?
I have not experience the HP in person, however, it does look different to me in photos and such.
You’re hoping to melt you indicator off. Its close.
Hasn't happened yet. These are aluminum body. Street and trail they've survived about 800 miles now
yes but, let's wash this bike