I haven't painted my Airsoft Replicas in quite a while, but I really had fun doing it again. The method we are using is super fast, easy to do, and delivers great results.
Me: *tries to paint dark matter camo on my sniper rifle and then gets spotted by everyone in 3 seconds because they all saw my purple glow in the dark paint*
The problem I always have with painting guns is once I have done one, I immediately wanna do it again and then end up going from a full black loadout to everything just looks like a bush :D
A note to anyone doing this, please wear protective breathing equipment and safety glasses, make sure your workspace is well ventilated. Paint particles drying in your lungs or on your eyes is not something you'd like. Some great info in the video but the fact they're spraying inside without protective glasses or mask is very worrying.
I personally just get ghillie wraps for my guns if i want to blend in. Nothing inherently wrong with painting, but i like options. Painting a gun permanently locks you to that look. Wraps or ghillie wraps allow multiple different looks for your gun without forcing you to stick with just one.
painting a gun does NOT permanently lock you to that look. you can repaint guns. god invented sandpaper for a reason. there's also steel wool, and whatnot.
Reminded me of the 3 hours I spent doing a WWII panzer camo paint job on my old AK in 2016 - (turned out really good though and still is mostly intact to this day)
Mit gefällt das Painting des linken Gewehrs sehr gut. Die Farben sind absolut stimmig. Auch die Wahl des Blattes war ideal. Klasse Techniken, die einfach umzusetzen sind. Danke für dieses hilfreiche Video :)
the part where they say, paint outside, but not in a place where airsoft guns are not allowed. this is invaluable information. this is a funny coincidence, but i was being dumb and painting in my front yard; my aps guardian, and an off duty cop (who was coming home from and airsoft game) stopped me and stuff got real. after he realized it was a replica, he told me he was coming back from an airsoft game and he had a custom painted replica in his trunk. just a fun story i wanted to share with yall
Are you going to be dropping a black battle belt in the next few months? Black would be perfect for my setup but if you aren’t then I’ll go ahead and order a different color. Thanks for the amazing content and guns! Can’t wait to get the SSR15!!!
Me: "omg! No masks, no ventilation, laying the gun on its side, fully assembled, with the optic STILL ON?! Wtf are these guys dooin'? Novritsch: *turns gun into Rembrandt*
Hey, so I know this is off topic from the video, but I had some problems with my gun silencer a couple weeks ago and was wondering if you could tell me if you know what the problem is? I live in the us so I had to buy the SSP1 with the orange tip, but when I finished installing all of the parts to make it compatible with my gun (the correct barrel and thread adapter) I installed the suppressor and when I shoot my gun the barrel gets stuck back. The stopping piece is not the problem, the slide just gets stuck. I think it has to do with the weight of the suppressor, but if you could help me, that would be awesome. Thanks for reading this, keep up the amazing content.
hey NOVRITSCH. du wirst mich bestimmt nicht kennen aber ich bin der sohn von der freundin deiner schwester aus frankenmarkt und ich wolte nur mal danke sagen das du ich immer wieder inspirierst, dass ic so früh wie möglich mit airsoft anfangen will :D :D :)
What is the best sniper rifle for a beginner like me.and thank you for all your content and all your videos Can allways make me happy after a hardt day
Did you take the internals out of the gbb pistol when you painted it? I wanted to paint my TM MK23 but I wasn't sure if there was something different I should do. Thanks!
Hallo Novritsch du bist der beste Airsoft CZcamsr den ich kenne. Ich war auch schon bei deinem Shop leider sind mir die Waffen zu teuer ich spiele seit 2 Jahren nur spring gun. Liebe grüße aus Österreich.
ontop of stepping on a mag, you can now flick paint at a fully assembled rifle and if you jam it up due to paint build up since this is showed here by nov its also covered by the 25 year warranty? I really like what you guys have done for the sniping community but really confused with the recent destructive advice.
You need to put some vegetables on it
someone watched the tutorial from 2016 😉
How to paint your airsoft gun
*Kill some people take thier blood and use the blood for paint to red*
@@novritsch vegetables are in german = gurke,tomaten und so
Ahaha yes I remember that
Under rated video
Me: *tries to paint dark matter camo on my sniper rifle and then gets spotted by everyone in 3 seconds because they all saw my purple glow in the dark paint*
😂
Thats 3 seconds for you to take them out
@@germandalek9687 that’s the amount of time I spend racking my gun and aiming it, maybe I should have put it on my assault rifle.
*hahaha*
Worth it
When You're A Veteran in Airsoft For So Long That You Got OP Skins
I dont get it?
@@goldlockfish765 op stands for over powered
Me watching this even though I’m not planning in painting my gun:
*Interesting*
Same😂
I just want to paint the slide on my Glock 18
I wonder how Josef feels about Nov killing his vegetables...
not good. I'll get my revenge when the fields open again.
Josef Mucha you definitely need to record it when you do. I want to see what happens 😎
When you unlock the spray camos in Modern Warfare
I actually always wondered why they added the spay paint option... and how tf they do it
Some of the spray camos in MW do look pretty neat
@@sayakest agreed
@@sayakest
Camos or skins?
@@marcopolio6591 I call the camos you can unlock by just playing the game camos and skins are the ones that come with gun blueprints
The problem I always have with painting guns is once I have done one, I immediately wanna do it again and then end up going from a full black loadout to everything just looks like a bush :D
good cause black stands out the most on a field
A note to anyone doing this, please wear protective breathing equipment and safety glasses, make sure your workspace is well ventilated. Paint particles drying in your lungs or on your eyes is not something you'd like. Some great info in the video but the fact they're spraying inside without protective glasses or mask is very worrying.
Was thinking the same, look at the cloud of paint they're breathing in
Agreed. This is very bad practice and setting a very poor standard/influence for the younger audience that look up to him.
Does a mask counts as protective breathing equipment?
@@Firefly_26710 yea, anything works
Ive done it once without knowing but thankfully was outside.
I got my SSG10 a month ago and I love it! Congrats on the success Chris!
Been a while since i was here feels good
I’ve needed a good tutorial like this for months
thank you so much for shipping out the 1-4x scopes :) Love your content
I personally just get ghillie wraps for my guns if i want to blend in. Nothing inherently wrong with painting, but i like options. Painting a gun permanently locks you to that look. Wraps or ghillie wraps allow multiple different looks for your gun without forcing you to stick with just one.
painting a gun does NOT permanently lock you to that look. you can repaint guns. god invented sandpaper for a reason. there's also steel wool, and whatnot.
Until this moment, I had never heard someone else say "that's why God created......" I use it often. Well played sir, I see you
That looks so good both of them
Reminded me of the 3 hours I spent doing a WWII panzer camo paint job on my old AK in 2016 - (turned out really good though and still is mostly intact to this day)
Finally a new vid!
It would be sick if he would play airsoft in the snow.
We have snow in Finland
We have snow in New Jersey
He did airsoft 1v1 against silo in the snow ;)
We have snow in Pennsylvania
We have snow in Russia
Wow I've never been this early before,finally a good CZcamsr in my timezone
Mit gefällt das Painting des linken Gewehrs sehr gut. Die Farben sind absolut stimmig. Auch die Wahl des Blattes war ideal. Klasse Techniken, die einfach umzusetzen sind. Danke für dieses hilfreiche Video :)
these guys work really well together
the part where they say, paint outside, but not in a place where airsoft guns are not allowed. this is invaluable information. this is a funny coincidence, but i was being dumb and painting in my front yard; my aps guardian, and an off duty cop (who was coming home from and airsoft game) stopped me and stuff got real. after he realized it was a replica, he told me he was coming back from an airsoft game and he had a custom painted replica in his trunk. just a fun story i wanted to share with yall
Jo, that new bolthandles and endcaps are really sick!
I liked your color scheme a lot Chris! I want that SSX303 so bad!
The other guy looked so happy the whole time.
Love the ventilation
Looks really cool, it’s something I’m thinking of doing it on my SSG 96
Thanks novritch for sharing a quick idea on how to paint a rifle. 👊
they came out verryy well!!!
Those guns look absolutely adorable 🥰
Very cool, I like them both! Thanks.
Nice paint job 🎖️
Really awesome work!
Looks awesome dude
I Love the paint job ✨👏🏻
yup, I still like my style the most xD
but nice to see ppl doin spray paintings and seeing new techniques! :)
gj!
Those are some sweet guns
Nice video again!!! Great job!!!
So many things can now be camo'd😁😁😁😁 Thank for all the great tips 😎😎😎
Its been a while since Ive seen your videos, but Im digging the facial hair man. Lookin good 👌
ordered the ssg10! arriving in a few days
very good ventilation you got going there
Great video. Thank you
You don’t paint your weapons in the military, you cover them with scrim net for camouflage.
Great video, hope y’all can get to making more Airsoft war videos soon.
I sense someone from the south
same! The situation at this moment does not allow us to do this. :/
@@dmorr5931 yep lol
@@dmorr5931you norde verde nerde
Great ideas for painting, thx
Really interesting. My next project will be painting my gun using this method.
I love painting guns... It's become a addiction for me 😂
Thank you Chris and Doug. This was very helpful. The guns look sweet.
No information, only promises selling alk times
When are we getting an update on when the first SSX303s are shipping!
Looks great, I’m thinking of doing it on my SSG96
great video both looked great too
Are you going to be dropping a black battle belt in the next few months? Black would be perfect for my setup but if you aren’t then I’ll go ahead and order a different color. Thanks for the amazing content and guns! Can’t wait to get the SSR15!!!
I love the SSX 303 more. It's really nice!
That's a great vid man, I've been waiting since the first week of December for the SSP18 order. Can we get working on that?
Hey I plan on buying one of your pistols and the more I saw and looked into it the pistol is basically perfect
Nah, It's good, but it is far from perfect
Thx for the great tutorial
Soo beautiful
That 303 is sickkkkkk
Me: "omg! No masks, no ventilation, laying the gun on its side, fully assembled, with the optic STILL ON?! Wtf are these guys dooin'?
Novritsch: *turns gun into Rembrandt*
I was just about to paint my gun when this came out
Very Nice video i love it
ich finde es richtig geil das du deutsch/Österreich/Schweiz bist.
Nice video and I’m in the top ten
Am getting the hyperbeast wrap for ssg96 can't wait
You should sell paint cans in the US website. Pretty neat idea
Very Informative
I stopped a House Gamers airsoft TTT video for this XD
When are you going to sell the gun stands that hold up your gun?
Love this
Hey, so I know this is off topic from the video, but I had some problems with my gun silencer a couple weeks ago and was wondering if you could tell me if you know what the problem is? I live in the us so I had to buy the SSP1 with the orange tip, but when I finished installing all of the parts to make it compatible with my gun (the correct barrel and thread adapter) I installed the suppressor and when I shoot my gun the barrel gets stuck back. The stopping piece is not the problem, the slide just gets stuck. I think it has to do with the weight of the suppressor, but if you could help me, that would be awesome. Thanks for reading this, keep up the amazing content.
I was in game of valorant and the notification pop out and I stop my game and start to watch this video 🤣🤣
every time Novstrich stares off at nothing I think he's seeing the numbers.
I stopped silo's video to watch this one loll^_^
Wow this helped me greatly, I’ve wanted to paint my AEGs for a while but didn’t know how. Thanks NOVRITSCH👍
hey NOVRITSCH. du wirst mich bestimmt nicht kennen aber ich bin der sohn von der freundin deiner schwester aus frankenmarkt und ich wolte nur mal danke sagen das du ich immer wieder inspirierst, dass ic so früh wie möglich mit airsoft anfangen will :D :D :)
You should make one for the ssr4
U see this is the thing i would love to do but i would mess it up .i really like ur paint job on ur gun
What is the best sniper rifle for a beginner like me.and thank you for all your content and all your videos Can allways make me happy after a hardt day
I just got the ssp18 can’t wait to get it
Just ordered it
Looking forwards to when my 303 arrives and it can get a makeover!! ::: )))
Remember there's no such thing as mistakes. Only happy accidents.
5:20 Is when they start painting
thanku so much
I want those same 3 colours Nov used for my sniper... !
A whole new meaning to getting to know your partner better
Junaid Jamshed!?
@@coolxg4357 no
@@coolxg4357 just junaid
Rhodesian Vibes intensifying
I noticed that on the 303 Chris painted over the modular suppressor. Would u still be able to adjust the size with the paint on it?
only og's remember the old 2016 tutorial
I REALLY LIKE THE TAN AND GREEN ,WITH THE PLASTIC FOLIAGE, WOULD WORK GREAT IN MY ENVIRONMENT 👍👍
I need the ssg10 a1 it's sick
Should I use primer or sand the gun if I am working on plastic? Do you guys have a urban camo video?
thank you :)
Yes send my pre order and Ill paint it!
Did you take the internals out of the gbb pistol when you painted it? I wanted to paint my TM MK23 but I wasn't sure if there was something different I should do. Thanks!
This is the earliest I have ever watched a novritch video
Hallo Novritsch du bist der beste Airsoft CZcamsr den ich kenne. Ich war auch schon bei deinem Shop leider sind mir die Waffen zu teuer ich spiele seit 2 Jahren nur spring gun. Liebe grüße aus Österreich.
Hi, thanks for tutorial. May I ask what type of paint spray is suitable for the guns? Any specific?
ontop of stepping on a mag, you can now flick paint at a fully assembled rifle and if you jam it up due to paint build up since this is showed here by nov its also covered by the 25 year warranty?
I really like what you guys have done for the sniping community but really confused with the recent destructive advice.
NGL i liked Chris's a lot better... wanna see it in action!
I would like to see them paint the ssp1