Agree. Most of the time I do. I have eight. But I got lazy. BTW. with the wheels on there is enough clearance for me. Also with two jacks on the frame, just one is enough to lift the van. Still I agree, jack stand would be safer.
Safely first, Jack stands. They make a pan for the 62 E that has a drain. You will need to change the filter per manufactures instructions. But you can dropped the fluid twice or more every year without a mess.
Ta, mate- I found the video to be very helpful and also learned from the comments. Humour is very important in life and I found the conversation between the two of you at the end of the vid to be quite champion! God bless, keep safe-
Well if you were not stupid, you would have NOT loosened the (2- left in bolts ) more than one thread. Then pry the pan lose. Then loosen the 2 remaining bolts very slowly. You said you got it worse before. You don't learn very fast. Pretty good video. Thank you.
I apologize if I missed , I re watched looking for where you actually added transmission fluid, I see where you put dipstick and what you replaced but did not see transmission fluid added. Thank you. helpful video
@@princekhan5063 thank you for answering, one more question if I may, I clearly saw on your video where you checked under the hood with dipstick ( I know there is not a dipstick, but a cap) I can not find where that is on mine. It is 2011 Chrysler town and country. Do all have this? And I’m just missing it? Thank you in advance
@@cheryldanielson8629 The transmission fluid level is checked by inserting a dipstick into the hole the cap was covering. Fluid levels are very different depending on the transmission temperature.
Never trust anyone who doesn’t use Jack stands. It’s your dangerous having those jacks under there like that and not using stands!!! Please be safe people!!
Una pregunta amigo cuántos litros de aceite se le pones a la transmisión de un una Ben de 6 cilindros si me pudieras dar una respuesta porfavor te lo agradecería mucho saludos
Sorry for the late response. I want to change the solenoids one time in my life, and I got it wrong. I had to replace the transmission. So I would rather not give you any submissions. 😂 Good luck though, hope you have better luck than I did.
Damn bro. I wouldn't go under the car with only jack holding it. I would hate for someone that is watching and fallows your video to get hurt or worste killed. There's nothing wrong with using power tools!! It's fine using it to take screw/bolt off. When you put them back on you started by hand and then you can use that small impact you have. Its not that powerful just run it till you hear one click. torque it to spec after.
Yea buddy. I would take the video down for just the reason that John G mentioned jack stands are a must. Also consider wearing safety glasses for videos. Thanks for trying to help everyone, but safety first!
Honestly, because with the wheels on, there is enough clearance for me. Also with two jacks on the frame, just one is enough to lift the van. Still I agree, jack stand would be safer.
@@princekhan5063 I own a 2012 Chrysler town and country and when it is sitting on the pavement both tires sitting on the pavement I can’t even get a floor jack under it. I had to drive it up on a brick to get it high enough to get the floor jack under it. So I seriously doubt as a human being would fit before they were smashed by the car take care have a good day
@@arthurwday7215 Hey Short Bus Rider.. You like walking? How about AC\Heat. Electricity? Why you public schooled ones are the most uneducated people on the planet..As one damn Volcano eruption spews 1 million tons of pollution in the air every month..How about oil.. The earth crust produces 300 Million barrels of oil on the Ocean floor. Every year..Without that heat and oil. Volcanic activity. Life at that depth dies inside 24 hours.. You imbeciles need to open a Science book once a year..And stop with the virtue signaling.. I wish Darwinism was around to delete the unproductive off the planet. As all you people do is consume resources. That could be better used for the productive ones.. You Damn cretins. You done shit. The most useless generation ever produced..
@@WizzRacing You don't know jack! The crap being put back into the ground is nothing like what came out. Humans have totally re-arranged the molecular structures of the natural stuff coming out of the ground so much it is very toxic. Your choice of language just shows your real ignorance and lack of intellect that goes along with your IQ of ZERO!!! If you have children or plan to please hope they die young before they have to suffer from attitudes like yours!
A neighbor of mine lost his life years ago not using jack stands. Never chance it even once!
Please use a pair of Jack stands while working underneath.
Agree. Most of the time I do. I have eight. But I got lazy.
BTW. with the wheels on there is enough clearance for me. Also with two jacks on the frame, just one is enough to lift the van. Still I agree, jack stand would be safer.
Very thorough instructions. I like it when people don't edit out their mistakes. Shows humility!👍🏼😁
Thank you. We all make mistakes. Pretending like we don’t would only discourage other people.
Safely first, Jack stands. They make a pan for the 62 E that has a drain. You will need to change the filter per manufactures instructions. But you can dropped the fluid twice or more every year without a mess.
Good to know. Thanks.
He already sold his van. And I don’t own one either. I won’t be doing another one of these for a while.
Just finished transmission flush on mine, instantly noticed faster and smoother shifting. Very helpful video, thank you!
Ta, mate- I found the video to be very helpful and also learned from the comments. Humour is very important in life and I found the conversation between the two of you at the end of the vid to be quite champion! God bless, keep safe-
Well if you were not stupid, you would have NOT loosened the (2- left in bolts ) more than one thread. Then pry the pan lose. Then loosen the 2 remaining bolts very slowly. You said you got it worse before. You don't learn very fast. Pretty good video. Thank you.
This was fantastic instructions n lots of good humor. Subscribing
I apologize if I missed , I re watched looking for where you actually added transmission fluid, I see where you put dipstick and what you replaced but did not see transmission fluid added. Thank you. helpful video
I added the fluid through where the dipstick goes.
@@princekhan5063 thank you for answering, one more question if I may, I clearly saw on your video where you checked under the hood with dipstick ( I know there is not a dipstick, but a cap) I can not find where that is on mine. It is 2011 Chrysler town and country. Do all have this? And I’m just missing it? Thank you in advance
@@cheryldanielson8629 The transmission fluid level is checked by inserting a dipstick into the hole the cap was covering. Fluid levels are very different depending on the transmission temperature.
No jack stands on uneven ground, just let the old fluid drain all over the ground. Jess this could so easily turn into a horror film🤣
That's what I was rooting for. A snuff film.
Khan saab,,,,, NEXT TIME JACK STANDS pls ok,,, saftey first,,, you might hurt yourself ,, becareful next time ,Gr8 job done 5stars.
Is your Transmission still working and holding up since using the Lucas?
Never trust anyone who doesn’t use Jack stands. It’s your dangerous having those jacks under there like that and not using stands!!! Please be safe people!!
Good video! Thanks
Please use some sort of support for the vehicle when working underneath
Bro when the transmission fluid went down my soul left my bpdy
Bro how many litres for transmission fluid for Chrysler grand voyager 2011
Una pregunta amigo cuántos litros de aceite se le pones a la transmisión de un una Ben de 6 cilindros si me pudieras dar una respuesta porfavor te lo agradecería mucho saludos
6 litros me recomendó la agencia
How do you feel about using a gasket instead of RTV when replacing the pan?
Safety Third!
Lmfaoo
Very good instructional video 👍 I enjoyed it! I have to change my transmission solenoid block! A bit of a worry! And suggestions? Thanks
Sorry for the late response. I want to change the solenoids one time in my life, and I got it wrong. I had to replace the transmission. So I would rather not give you any submissions. 😂
Good luck though, hope you have better luck than I did.
Damn bro. I wouldn't go under the car with only jack holding it. I would hate for someone that is watching and fallows your video to get hurt or worste killed. There's nothing wrong with using power tools!! It's fine using it to take screw/bolt off. When you put them back on you started by hand and then you can use that small impact you have. Its not that powerful just run it till you hear one click. torque it to spec after.
Yea buddy. I would take the video down for just the reason that John G mentioned jack stands are a must. Also consider wearing safety glasses for videos. Thanks for trying to help everyone, but safety first!
Hello I have the same van and the same dipstick a mine says it’s at 110 mm what should I do and my van runs good tho???
What is the diagnostic tool you use and how much it will cost.
Thanks
Launch Creader VII+ OBD2 Scanner. Roughly $150. Right now on Amazon it’s $129 (Launch Creader VII+ OBD2 Scanner ABS SRS Transmission and Engine Code Reader Diagnostic Scan Tool www.amazon.com/dp/B00BGH0EAC/ref=cm_sw_r_cp_api_glt_fabc_VW9NEQKKYHKW9R08X4X1)
Sorry for the delayed response.
@@princekhan5063
Thanks 🙏
Спасибо за полезный обзор👍
Sorry I can’t understand the comment. But I like the thumbs up 👍🏽
Did you put the magnet back in?
Yes.
The spec on the trans pan bolts is 105 inch pounds.
That is like 10fbs.. You can hand tighten 10 fbs....
@@WizzRacing OK
Good vid but WHY wouldn't you put some old wheels under the front tires. Just for safety.
Honestly, because with the wheels on, there is enough clearance for me. Also with two jacks on the frame, just one is enough to lift the van. Still I agree, jack stand would be safer.
@@princekhan5063 I own a 2012 Chrysler town and country and when it is sitting on the pavement both tires sitting on the pavement I can’t even get a floor jack under it. I had to drive it up on a brick to get it high enough to get the floor jack under it. So I seriously doubt as a human being would fit before they were smashed by the car take care have a good day
Didn’t put the filter in on camera
Great oil. Get rid of the lucas crap.
2010 bolts are 10 mm
Camera guy rules. 👍👍🤛🤣
Does this fox P0740 code??
I am not sure. I didn’t have any codes when I did this.
@@princekhan5063 but they say never change the transmission fluid because it could Make the tranny slip??
@@princekhan5063 this town and country didn’t have a transmission fluid drain???
Do you know how many quarts of irs the transmission take
Oil*
Sorry. I forgot. I just googled it when I did it.
Is 4 or 5 quarts
but you dont need drain entire fluid just 1/3
Yes. Only about 1/3 is stored in the pan. Rest is in the radiator, torque converter and trans. Which doesn’t come out when I drop the pan.
@@princekhan5063 So in my case with 140k miles they say not recommended to change the fluid for might start slipping
Woww no jackstands🤦🏾🤦🏾
Traduccion en español
The sound is terrible
That’s not suppose to come off.
Do as I say and not as I do! Well bro I think I'll pass on all what you've done !🧐
Good luck.
Hope you find the answers you are looking for. And stay safe.
Bummer there is no respect for the earth as one trashes it with toxic substances!!
Hate to tell you.. The earth is where they come from...Unless you think they come from magic pixie dust...
@@WizzRacing Guess good excuse to pollute. Hope your progeny enjoys the mess!
@@arthurwday7215 Hey Short Bus Rider.. You like walking? How about AC\Heat. Electricity?
Why you public schooled ones are the most uneducated people on the planet..As one damn Volcano eruption spews 1 million tons of pollution in the air every month..How about oil.. The earth crust produces 300 Million barrels of oil on the Ocean floor. Every year..Without that heat and oil. Volcanic activity. Life at that depth dies inside 24 hours..
You imbeciles need to open a Science book once a year..And stop with the virtue signaling..
I wish Darwinism was around to delete the unproductive off the planet. As all you people do is consume resources. That could be better used for the productive ones..
You Damn cretins. You done shit. The most useless generation ever produced..
@@WizzRacing You don't know jack! The crap being put back into the ground is nothing like what came out. Humans have totally re-arranged the molecular structures of the natural stuff coming out of the ground so much it is very toxic. Your choice of language just shows your real ignorance and lack of intellect that goes along with your IQ of ZERO!!! If you have children or plan to please hope they die young before they have to suffer from attitudes like yours!