Awesome project Mike! As a custom installer (home automation), we work with plenty of these style of TV lifts, and one consideration you didn't mention is that once you screw the insert concrete panel to the top of TV lift mechanism, you have a nice four sided guillotine. With the weight of the concrete and the power of the motor, you could easily fracture, maybe even sever a finger. We tend to prefer using dowel pins to locate the concrete top in place, and stop it sliding off into the cabinet, yet prevent fingers (or tails!) getting badly damaged. Love your combination of slick modern builds and great presentation! Keep up the great work!
Thanks James! So are you suggesting having the concrete lid be unattached to the lift, so the lift would kind of pick the concrete up off the dowels on it's way up? If so, would you be concerned about the lid getting knocked off by accident and cracking? I always love hearing tips from those who do this professionally, so I want to make sure I'm understanding your suggestion correctly :)
@@modustrial - Mike, this Depends on your lift mechanism. Let me see if I can explain this in a reasonably unambiguous manner. We use Nexus21 mechanisms which allow you to set your open and closed "limits" (of travel), so you can configure the motor to stop just after the lid closes on the way down, and just after the bottom of the TV appears on the way up. I would expect this to be the case for most models of TV lift mechanism. This is how you adjust the height of the lid such that it sits flush with the main top surface of the cabinet when closed, and also such that it comes up as far as you want it to out of the cabinet, depending on the size of the TV etc. Most of our cabinetmakers put a lip around the inside of the cutout in the main top surface such that the lid will come to rest on the lip once it comes all the way down. We set our closed limit to be maybe a 1/8 of an inch further down below the level of the lip, to make sure the lid is completely closed and resting on the lip of the top surface. On the way up, the top of the metal frame of the mechanism will collect and push the lid up as it lifts the TV, the lid sitting on the metal top plate of the lift mechanism that you screwed the wooden lid inserts down onto. It might sound a little precarious, but it isn't really, I would guess it depends on the size of the metal top plates of your mechanism. The wooden dowel pins I was mentioning would make sure that the lid doesn't slide around - they would seat in the screw holes in the metal top plates of the lift mechanism. It is, however, possible to lift the lid off, which can be useful if you can't otherwise get access to the inside of the cabinet, and also prevents trapping issues when the lid closes. Given that you are working with a much heavier concrete lid, your stakes are much higher. Cats are eternally inquisitive, and I can predict that an inquiring feline mind will discover an unbearable itch to see just how much better (and warmer) the view is from on top of the nice display platform that you have so faithfully created for them ;) Cat + precarious perch = 100% trouble. If our (maybe 1/2" thick) hardwood lid falls off, into the cabinet, it's not usually a big deal, unless it somehow scratches the front of the display, but your concrete lid could cause widespread chaos, mayhem and not a few tears were it to be dislodged from the top of the lift mechanism if you changed to dowel locating pins. As such, a third option would be to slightly longer screws to attach the concrete lid to the metal top plate, but back them out half an inch or so, to allow the lid to pivot just enough to prevent as much damage happening if something gets trapped. Above all else, I would suggest making it impossible to operate the mechanism remotely if you use the current setup, and provide an easily accessible emergency stop switch somewhere on the cabinet. In the end it's all about deciding on what combination of cool factor/risk/safety works for you! Hope this helps
Thank you for the amazingly detailed response. Pinning this comment as I think it has important safety/design considerations for anyone making one of these. For me, I think I'm on with it how it is since I'm a single guy with no kids, but throw kids in the mix, and I think this changes.
Looks incredible Mike! Thanks for incorporating one of our TV Lift Mechanisms into this build. This has to be the most creative DIY project we've seen with a lift mech to date. Well done!
Thanks much! The lift kit works great and was so easy to install. With all the other challenges in this project, it was nice for the lift itself to be so simple!
First of all; you have an awesome bedroom. Great video. I love the idea of positioning the TV at the optimum height for ease of viewing. "Dexterfying" is a must for most construction.
You should install a dark black, scrolling backdrop on the window so that anytime the TV comes up, your blackout curtain/ screen comes down. And conversely anytime the TV goes down, the backdrop goes up. Great video, love the install. Also REALLY appreciate the *honest moments of when projects fail or have imperfections. I don't want to watch a CZcamsr whose perfect. I enjoy seeing the errors as 1) that humanizes you to your audience and 2) helps me avoid pitfall I would make.
for the trim you could do a flat piece of 2x1/4" steel drill spaced out holes periodically down the length of the steel and then install rounded carriage bolts in those hole. it's best if you cut the heads of the carriage bolts off and weld them from the back side of the hole, but if you don't have access to a welder just use a nut at the back side of the trim and then make room for the nut on your removable wall. paint the whole thing flat black and it give a really nice custom rustic feel! i use this trick a lot. p.s. this was another excellent build!!
You could try using a flat piece of black steel for the trim at the bottom. It would balance out the dark concrete top and would look really nice against the exposed brick as well.
Hi Mike, all your projects are fantastic but I think you've really outdone yourself, this is an awesome build, I was having a crappy day and my phone pinged with this video, feeling better. Keep up the great work and by the way, that's a great apartment too! 😊
You have a lot of great ideas. I've learned a lot from just 2 videos. I also have to say the rate that you put together, execute, and edit these projects is impressive. I like that you admit to an issue, like casting the concrete on the floor, and follow up on it.
Looks good. Only thing I would change is to give the lid and space that the lid goes into a tapered shape so it flows more seamlessly with the counter top when down. It's too evident the way it is made.
Where do we begin? So much great information, and so many great tips! We especially loved how you used the fondant ball tool for your caulk line, we'll have to remember that one. We really appreciate how you pointed out the things you weren't happy with, even if no one else would have noticed them. Fantastic project and video!
I know it wouldn't be super cost effective but could you use some nice picture framing for the trim? Might be worthwhile if you find something you like. Great Video, thanks for the upload.
Excellent project! I'm assuming you have already trimmed the bottom but if not you could cast another trim but instead of having it on the floor, leave a 5mm gap(enough that you can't see the floor to cabinet intersection) so it floats and run another led track pointing down.
Awesome project! Should take some flat aluminum and paint it the same black as the edge piece for the trim along the bottom. Would be simple, easy, and clean!
That was a fantastic project and some ideas for me to tackle... As for your trim at the bottom how about some 15mm copper pipe, keeps things sturdy and a different approach to coving or skirting
Thanks! I'm intrigued by the copper pipe idea, but not quite picturing it...were you thinking of slicing the pipe in half and just using construction adhesive to attach it?
@@modustrial I was initially think as the pipe is small you could just straight attach it sort of a mini bump stopper... However I do like the idea of slicing it in half and adhesive fixing it to the bottom
you can add some vertical wireless spreaker on side of the tv or hang it on with the top. that will look super awesome if they look kind of levitating on side of the tv
That bedroom.... OMG (open mouth) If i had a bedroom like that i never get out of bed... unless to go to my workshop and build other beautiful things... and to eat of course LOL
How flexible is the concrete lid❓ Build a steel frame (just 4 pieces of square tube welded into a rectangle), slightly bowed ends down, and attach the lid to it, forcing it to be flat. If it does not work, at least you have tried something.
I think you'd get surface cracks if you tried to flex it. I like the effort to think outside of the box! For me, without ability to weld, the simplest thing is probably to just make another one from concrete to fix it.
Just get some quarter inch shoe molding and paint it black since you got black edging everywhere else I think that will look all right. And just glue it to the panel that pops off so it looks like it's nailed. And you can mail everywhere else. Is a quarter inch display it's nice and small and not a big black line. But sometimes the one inch or 3/4 of an inch I think it is looks pretty good too. Or you can get that new wood floor rustic tile looking stuff and body 2-inch pieces and stick it on like trim. Just glue it on with power grab or Liquid Nails. But it looks great man. I'm going through an led phase. I got that shit on everything but it makes things look so much cooler. What a cool room an place you got man. I love the style.
Great build first and foremost...but I suggest for the “banana”...paint a piece of some material to the preference you prefer and(to match)that would be placed and act as a “wedge” and just grab a different length of screws or bolts,and simply level it after that. But amazing job and keep it up.
I hate standard blah boring white trim too! A thought is to build your own. Either find a craftsman style trim or an industrial with your space being that already... I’d actually stain it dark or paint as I can’t imagine light trim around your walls anywhere in your room. I’ve seen gorgeous thick base trim painted or stained in dark navy colors, grey and even a flat black would look awesome in your space. Definitely go with thick trim as opposed to thin and short as your brick walls need something to balance them
Thanks! Yup, that is definitely an option. Just wanted to see if I could come up with something clever beyond that... But very well may just go that route in the end
have you considered creating your own trim from concrete? add in some aggregate that'll sparkle underneath the LEDs but still dark to match the top. as far as mounting consideration, when casting, use some screws or bolts to make depressions while the concrete is setting and use those depressions as DIY keyhole mounts that'll slot onto screws/bolts mounted into the base of the cabinet
Is the tv lift able to be controlled by Alexa or other voice assistants I’m building a table to work on and also I want a cubby like thing to come up like your tv does with all of my mounted tools I would prefer to control it by Alexa so just thought I’d reach out to you for advice thanks
Watching your videos is satisfying from buying the building to renovations now these my son and I love hgtv so I’m hooked on ur videos lol u got my sub
You could use some Metal plate as base board. Weld some Fender Bolt heads to it to make it look like it has been riveted like old structural steel. Then stain it to make it look old and worn.
You should attach a sound bar to the top of the lift and leave it there as it goes up it could be a good way to hide the concave shape that the flat panel has
Amazing build per usual! Looks great in person as well. You make using concrete look easy, even when I am sure it is not. I do look forward to designing something concrete pieces at some point though and giving it a whirl. Lastly, glad I could help out :)
If you haven't already build a mold that you can cast the trim out of the concrete and color match to the counter top. It would be different and compliment it well
@@modustrial My pleasure and I just finished --- well done!!! It is good to be critical of your work.....don't let anyone tell you otherwise. That's why you are so good and probably why everyone wants to hang out in YOUR bedroom. I mean that in a creative way of course. 😉 Thank you for sharing your wisdom with us.
hey Mike, as always a very nice video! Your projects are always well thought out and professionally built. So far I have not known that there are special saw blades for melanine. I will get in any case, too. Best wishes Frank
Thanks! The blade is specially made for double sided melamine, so both sides come out clean. It's a must for anyone like us that does lots of concrete work like us 👍👍
Hi Your work is awesome, congrats! Can you tell me the instructions to install wifi relay to the TV link, cables wirering because I wanna do the same on my TV lift connected with Alexa. Thanks in advance
How about more of the black-painted aluminum flat stock as your base trim? It would kind of "picture frame" the wood panel. Pretty cool build - I'm surprised the TV lift can accommodate the additional weight of the concrete top!
That is definitely a thought, and likely what I'll end up doing. The lift is rated for like 85 lbs, I believe, and the concrete top is only 25 lbs or so.
@@modustrial I see. You also answer fast 😄. Do you have any advice or video on how a beginner should deal with supplies and waste? Im hesitant to do anything with concrete because Im afraid that Im stuck with a ton concret stuck to every surface and buckets. Anyways keep the nice videos coming and be safe
nice video sir.... really inspired me... I'm new on youtube... I'm making a DIY tutorial .. really proud of myself because I got a 4k view on my 2-month channel (i think it's good for a small channel like me to grow up) thank you, sir... it a really good video... Hope I will more consistent in making a video like you... - love from Malaysia
I know I'm a year late but u have a router.. u can make any kind of trim you want brother... I'd get creative with it, and really make the piece your own.. great build and vid by the way.. it looks really amazing..
I have a question Mike! When youre wet-sanding the concrete, doesnt it leave water stains on the concrete? Or change the chemistry of the concrete? I think you once said that water will ruin the concrete's chemistry; which is also the reason you are applying seal on it.
I would love to do this and n my RV. Can you think of a way to make the concrete lighter? Maybe some sort of filler in addition to the glass fibers?? I want to build a TV lift cabinet with storage drawers and have the top and the kitchen counter match.
Awesome project Mike! As a custom installer (home automation), we work with plenty of these style of TV lifts, and one consideration you didn't mention is that once you screw the insert concrete panel to the top of TV lift mechanism, you have a nice four sided guillotine. With the weight of the concrete and the power of the motor, you could easily fracture, maybe even sever a finger. We tend to prefer using dowel pins to locate the concrete top in place, and stop it sliding off into the cabinet, yet prevent fingers (or tails!) getting badly damaged.
Love your combination of slick modern builds and great presentation! Keep up the great work!
Thanks James! So are you suggesting having the concrete lid be unattached to the lift, so the lift would kind of pick the concrete up off the dowels on it's way up? If so, would you be concerned about the lid getting knocked off by accident and cracking? I always love hearing tips from those who do this professionally, so I want to make sure I'm understanding your suggestion correctly :)
@@modustrial - Mike, this Depends on your lift mechanism. Let me see if I can explain this in a reasonably unambiguous manner.
We use Nexus21 mechanisms which allow you to set your open and closed "limits" (of travel), so you can configure the motor to stop just after the lid closes on the way down, and just after the bottom of the TV appears on the way up. I would expect this to be the case for most models of TV lift mechanism. This is how you adjust the height of the lid such that it sits flush with the main top surface of the cabinet when closed, and also such that it comes up as far as you want it to out of the cabinet, depending on the size of the TV etc. Most of our cabinetmakers put a lip around the inside of the cutout in the main top surface such that the lid will come to rest on the lip once it comes all the way down. We set our closed limit to be maybe a 1/8 of an inch further down below the level of the lip, to make sure the lid is completely closed and resting on the lip of the top surface.
On the way up, the top of the metal frame of the mechanism will collect and push the lid up as it lifts the TV, the lid sitting on the metal top plate of the lift mechanism that you screwed the wooden lid inserts down onto. It might sound a little precarious, but it isn't really, I would guess it depends on the size of the metal top plates of your mechanism. The wooden dowel pins I was mentioning would make sure that the lid doesn't slide around - they would seat in the screw holes in the metal top plates of the lift mechanism. It is, however, possible to lift the lid off, which can be useful if you can't otherwise get access to the inside of the cabinet, and also prevents trapping issues when the lid closes.
Given that you are working with a much heavier concrete lid, your stakes are much higher. Cats are eternally inquisitive, and I can predict that an inquiring feline mind will discover an unbearable itch to see just how much better (and warmer) the view is from on top of the nice display platform that you have so faithfully created for them ;) Cat + precarious perch = 100% trouble. If our (maybe 1/2" thick) hardwood lid falls off, into the cabinet, it's not usually a big deal, unless it somehow scratches the front of the display, but your concrete lid could cause widespread chaos, mayhem and not a few tears were it to be dislodged from the top of the lift mechanism if you changed to dowel locating pins.
As such, a third option would be to slightly longer screws to attach the concrete lid to the metal top plate, but back them out half an inch or so, to allow the lid to pivot just enough to prevent as much damage happening if something gets trapped. Above all else, I would suggest making it impossible to operate the mechanism remotely if you use the current setup, and provide an easily accessible emergency stop switch somewhere on the cabinet.
In the end it's all about deciding on what combination of cool factor/risk/safety works for you! Hope this helps
Thank you for the amazingly detailed response. Pinning this comment as I think it has important safety/design considerations for anyone making one of these.
For me, I think I'm on with it how it is since I'm a single guy with no kids, but throw kids in the mix, and I think this changes.
Simply use spring loaded fasteners and all hazards are removed. Top is secured but can wobble if something enters its path: cat, fingers, etc.
@robert buehl good idea -- do you by chance have a link?
Dude, your loft and everything you've done to it is awesome. Maybe not the most suited video for the channel but would love to see a loft tour! :)
Thanks brother! A loft tour would mean getting the whole place presentable at once tho! 🤣🤣
Looks incredible Mike! Thanks for incorporating one of our TV Lift Mechanisms into this build. This has to be the most creative DIY project we've seen with a lift mech to date. Well done!
Thanks much! The lift kit works great and was so easy to install. With all the other challenges in this project, it was nice for the lift itself to be so simple!
First of all; you have an awesome bedroom. Great video. I love the idea of positioning the TV at the optimum height for ease of viewing. "Dexterfying" is a must for most construction.
Thanks Raynola!
You have the best taste in interior design! Everything you make looks modern without being cold and sterile. I realy like it!
disclosing the things that went wrong make DIY videos far more valuable. Well done.
You should install a dark black, scrolling backdrop on the window so that anytime the TV comes up, your blackout curtain/ screen comes down. And conversely anytime the TV goes down, the backdrop goes up. Great video, love the install. Also REALLY appreciate the *honest moments of when projects fail or have imperfections. I don't want to watch a CZcamsr whose perfect. I enjoy seeing the errors as 1) that humanizes you to your audience and 2) helps me avoid pitfall I would make.
for the trim you could do a flat piece of 2x1/4" steel drill spaced out holes periodically down the length of the steel and then install rounded carriage bolts in those hole. it's best if you cut the heads of the carriage bolts off and weld them from the back side of the hole, but if you don't have access to a welder just use a nut at the back side of the trim and then make room for the nut on your removable wall. paint the whole thing flat black and it give a really nice custom rustic feel! i use this trick a lot. p.s. this was another excellent build!!
Thanks! And good idea! 🧠🤔
Beautiful build! For the trim, I’d continue with the sprayed aluminum you used on the vertical corner piece. Same thickness, maybe 1.5” tall.
That was my initial thought...and sometimes it is best to go with your gut, so decent chance I come back to it :)
I agree with Paul. Black trim along the bottom to match the corner would look sharp.
That's awesome!
I always notice imperfections too in my own work but you're right no-one else really seems to notice 😅
Thanks! And yup, we're our own toughest critics :) but, I think that's how we learn and improve!
You could try using a flat piece of black steel for the trim at the bottom. It would balance out the dark concrete top and would look really nice against the exposed brick as well.
Steel is definitely a consideration!
Awesome build, I love it! As a suggestion, I’d mount a soundbar on top of the lift. Bluetooth music when the tv is away, better sound when it’s on 👍🏼
Thanks! And good idea!
Hi Mike, all your projects are fantastic but I think you've really outdone yourself, this is an awesome build,
I was having a crappy day and my phone pinged with this video, feeling better.
Keep up the great work and by the way, that's a great apartment too! 😊
Thanks man! Means a lot to hear that I could brighten your day :) hope it keeps getting better from here on!
Using the cake fondant tool is a stroke of genius! Might work in other applications too. Thanks for the tip!
No prob, thanks!
My 6 month old baby loves your channel
A future maker....I love it! 😀
Thanks for confusing my Alexa 😂Great build as always!
Ha, during editing the lights kept ending up on green, lol...
@@modustrial Alexa: The real life "Computer" from Star Trek.
This made my Alexa set an alarm for 5:53 tomorrow morning. Haha
Lol, sorry man, didn't mean to interrupt your sleep 🤣
Please I need your help to help me to learn this and God will bless you I am from Ghana very nice job
You have a lot of great ideas. I've learned a lot from just 2 videos. I also have to say the rate that you put together, execute, and edit these projects is impressive. I like that you admit to an issue, like casting the concrete on the floor, and follow up on it.
Thanks Rusty! I always try to document my mistakes as they are part of the learning process, and hopefully I'm making them, so others don't have to :)
That is really a great build, well done. Love watching your builds with cement
Thanks Jesse!
Looks good. Only thing I would change is to give the lid and space that the lid goes into a tapered shape so it flows more seamlessly with the counter top when down. It's too evident the way it is made.
This was AWESOME to watch. Thanks for sharing.
That looks absolutely fantastic!
Thanks you two!
you! why are you here!
it's great to see that I'm watching what one of my favorite youtubers watches lmao
Right up my alley! That's, Fresh!!!
Thanks Glen! Always means a ton to me when you take the time out of your insanely busy schedule to check out one of my vids!
This is so cool. If I was rich. I would buy this. Idk how to even do a diy craft. So idk why I'm watching this lol
You might want to add some motorized remote controlled blinds behind it to stop glare from that window......
I would love to.... Custom motorized blinds for 8.5 foot tall windows are $$$$ tho ....
@@modustrial Might be worth while to look into diy-ing a solution :)
Great video! I think I’m going to try spraying the base coat on my next concrete project after watching this!
Thanks brother! You definitely should try it....it opens up a lot of design possibilities with vertical forms too.
And It looks wonderful as a replacement for those black Asbestos window sills the UK still has in old buildings.
Definitely would be an improvement!
Where do we begin? So much great information, and so many great tips! We especially loved how you used the fondant ball tool for your caulk line, we'll have to remember that one. We really appreciate how you pointed out the things you weren't happy with, even if no one else would have noticed them. Fantastic project and video!
Thanks you two! Always means a lot from fellow Chicagoans! :)
I know it wouldn't be super cost effective but could you use some nice picture framing for the trim? Might be worthwhile if you find something you like. Great Video, thanks for the upload.
Interesting idea... I'd have to find something with more of a modern style, but that could work! And, thanks!
Excellent project! I'm assuming you have already trimmed the bottom but if not you could cast another trim but instead of having it on the floor, leave a 5mm gap(enough that you can't see the floor to cabinet intersection) so it floats and run another led track pointing down.
The top piece over the tv should have a soundbar on the underside and flip by 90 degrees when moved out of the hidden area
Awesome project! Should take some flat aluminum and paint it the same black as the edge piece for the trim along the bottom. Would be simple, easy, and clean!
Thanks! Painted aluminum is definitely on the list!
That was a fantastic project and some ideas for me to tackle...
As for your trim at the bottom how about some 15mm copper pipe, keeps things sturdy and a different approach to coving or skirting
Thanks! I'm intrigued by the copper pipe idea, but not quite picturing it...were you thinking of slicing the pipe in half and just using construction adhesive to attach it?
@@modustrial I was initially think as the pipe is small you could just straight attach it sort of a mini bump stopper... However I do like the idea of slicing it in half and adhesive fixing it to the bottom
They also make a thin copper sheet you can wrap things with... That might an option, wrapped around some wood.... Hmmm
Incredible work!
you can add some vertical wireless spreaker on side of the tv or hang it on with the top. that will look super awesome if they look kind of levitating on side of the tv
Good idea!
Adding a proximity sensor to the life may help as it can pinch any and all wondering fingers. Similar to normal elevators. Love your stuff
Good idea, and thanks!
For base use modern drywall metal standoff. Cut the bottom off to accommodate, and paint standoff to match side trim. Hope that helps.
I'll have to look into that.... Sounds like a clean modern look that could work well.
That bedroom.... OMG (open mouth) If i had a bedroom like that i never get out of bed... unless to go to my workshop and build other beautiful things... and to eat of course LOL
Lol, thanks much Chris! 😀
How flexible is the concrete lid❓
Build a steel frame (just 4 pieces of square tube welded into a rectangle), slightly bowed ends down, and attach the lid to it, forcing it to be flat.
If it does not work, at least you have tried something.
I think you'd get surface cracks if you tried to flex it. I like the effort to think outside of the box! For me, without ability to weld, the simplest thing is probably to just make another one from concrete to fix it.
Always great to see a perfectionists work in action. Incredible attention to detail.
Thanks Simon!
I can't decided if I like you more clean shaven or with a beard, it's like getting two CZcamsrs for the price of one.
Wow... What a great project... I'm honestly amazed of how good it looks... Great job M8
Thanks Romeo!
Just get some quarter inch shoe molding and paint it black since you got black edging everywhere else I think that will look all right. And just glue it to the panel that pops off so it looks like it's nailed. And you can mail everywhere else. Is a quarter inch display it's nice and small and not a big black line. But sometimes the one inch or 3/4 of an inch I think it is looks pretty good too. Or you can get that new wood floor rustic tile looking stuff and body 2-inch pieces and stick it on like trim. Just glue it on with power grab or Liquid Nails. But it looks great man. I'm going through an led phase. I got that shit on everything but it makes things look so much cooler. What a cool room an place you got man. I love the style.
Thanks again Frankie!
12:59 I felt the pain
use a black L bar for the floor molding. it'll match both the countertop and the industrial look
👍👍
The Alexa in my home responded to your voice commands for your Alexa. LOL
❤❤❤ you never cease to amaze and inspire.
Thanks Paul! Always means a lot coming from names I recognize on this channel :)
Great build first and foremost...but I suggest for the “banana”...paint a piece of some material to the preference you prefer and(to match)that would be placed and act as a “wedge” and just grab a different length of screws or bolts,and simply level it after that.
But amazing job and keep it up.
Thanks much!
I hate standard blah boring white trim too! A thought is to build your own. Either find a craftsman style trim or an industrial with your space being that already... I’d actually stain it dark or paint as I can’t imagine light trim around your walls anywhere in your room. I’ve seen gorgeous thick base trim painted or stained in dark navy colors, grey and even a flat black would look awesome in your space. Definitely go with thick trim as opposed to thin and short as your brick walls need something to balance them
All good ideas!! Thanks! 👍👍
Ive seen some of your videos in the past and they were great but as soon as i saw the GTI i tapped the sub button
Thanks! Love the GTI and glad to have you here for the fun!
well done, i cant believe you did this indoors
Thanks! Gotta make due with what you got :)
Nice build. You can use the same black painted aluminum angle you used for the corner, as the bottom molding.
Thanks! Yup, that is definitely an option. Just wanted to see if I could come up with something clever beyond that... But very well may just go that route in the end
have you considered creating your own trim from concrete? add in some aggregate that'll sparkle underneath the LEDs but still dark to match the top. as far as mounting consideration, when casting, use some screws or bolts to make depressions while the concrete is setting and use those depressions as DIY keyhole mounts that'll slot onto screws/bolts mounted into the base of the cabinet
That is definitely on the list! So far it's concrete, steel or aluminum.
As always, this project is fantastic! Your creativity and craftsmanship are always an inspiration! Thanks for sharing!! It turned out epic!
Thanks for the kind words! It always means a lot to hear them from people who have been watching the channel for a while
Is the tv lift able to be controlled by Alexa or other voice assistants I’m building a table to work on and also I want a cubby like thing to come up like your tv does with all of my mounted tools I would prefer to control it by Alexa so just thought I’d reach out to you for advice thanks
Watching your videos is satisfying from buying the building to renovations now these my son and I love hgtv so I’m hooked on ur videos lol u got my sub
Thank you!
Modustrial Maker ur welcome
You could use some Metal plate as base board. Weld some Fender Bolt heads to it to make it look like it has been riveted like old structural steel. Then stain it to make it look old and worn.
Very cool idea!
You should attach a sound bar to the top of the lift and leave it there as it goes up it could be a good way to hide the concave shape that the flat panel has
Good call! A sound bar has been on my list to make for a while.... This could be a really cool spot for it 👍👍
Amazing build per usual! Looks great in person as well.
You make using concrete look easy, even when I am sure it is not. I do look forward to designing something concrete pieces at some point though and giving it a whirl.
Lastly, glad I could help out :)
Thanks Griffin! The install was definitely easier, and more fun, with two people!
If you haven't already build a mold that you can cast the trim out of the concrete and color match to the counter top. It would be different and compliment it well
Good call!
Why you didn't put Alexa to the tv lift ? 😃
You can finish the trim with a 22mm copper pipe bent around the base for the industrial look.
Cool idea!
@ 3:36 - Lov'in the 'Old-Skool' - 'Acid Hose' Tunes man! 👍✌️🕺
Thanks!
for the trim use a piece of sheet metal. Acid etch a design into it
Loved the project. For the trim at the bottom you could cast a concrete 1"x0.5" when you remake the lift lid.
Good idea!
I wake up late and I am still dreaming, thanks to this awesome video!!!
Thanks for the kind words!
@@modustrial My pleasure and I just finished --- well done!!! It is good to be critical of your work.....don't let anyone tell you otherwise. That's why you are so good and probably why everyone wants to hang out in YOUR bedroom. I mean that in a creative way of course. 😉 Thank you for sharing your wisdom with us.
Of course! The way to get better is to enjoy your creations, but always keep a little bit of hunger to improve them. :)
Thanks for the tough guy alert 🤣🤣🤣. Without it I wouldn't have been ready
💪💪🤣🤣
hey Mike, as always a very nice video! Your projects are always well thought out and professionally built. So far I have not known that there are special saw blades for melanine. I will get in any case, too. Best wishes Frank
Thanks! The blade is specially made for double sided melamine, so both sides come out clean. It's a must for anyone like us that does lots of concrete work like us 👍👍
Dude awesome video. Fun the base trim you should do some sort of steel plates with bolts to make it look industrial, or modustrial
Thanks brother! Steel or aluminum made to look like steel are high on the list
Hi
Your work is awesome, congrats!
Can you tell me the instructions to install wifi relay to the TV link, cables wirering because I wanna do the same on my TV lift connected with Alexa.
Thanks in advance
Very cool idea
أنت فنان عبقرى . كم تمنيت أن أكون مثلك 👍
Beautiful result! I think a thin rectangular trim would look great, like 0.25" x 1.5" It would be as minimal as a quarter round but more interesting.
Thanks Emily! Agreed that it needs to be a minimal, and probably rectangular, trim. Definitely more modern that way
How about more of the black-painted aluminum flat stock as your base trim? It would kind of "picture frame" the wood panel. Pretty cool build - I'm surprised the TV lift can accommodate the additional weight of the concrete top!
That is definitely a thought, and likely what I'll end up doing. The lift is rated for like 85 lbs, I believe, and the concrete top is only 25 lbs or so.
Haha scared the shit out of me at 17:30 my alexa went off in a dark room watching this
Live edge Is awesome for molding
Awesome,like always! You deserve more views,for sure! Keep going,buddy!
Thanks Christophe! I like how you think 😉
Boi u look like the main character from the bee movie
John Cena??
Anodized aluminum quarter round trim for the floor with a upward facing rgb strip.
The upward facing LED could be really cool! 👍👍
Welcome to my bedroom, this is where the making happens.
Whoa, shouldn't you buy me dinner first?
🤣🤣 I build fast....
@@modustrial I see. You also answer fast 😄. Do you have any advice or video on how a beginner should deal with supplies and waste? Im hesitant to do anything with concrete because Im afraid that Im stuck with a ton concret stuck to every surface and buckets. Anyways keep the nice videos coming and be safe
You’re awesome man. Love your videos and your projects. Keep it up!
Thanks Aaron!
nice video sir.... really inspired me... I'm new on youtube... I'm making a DIY tutorial .. really proud of myself because I got a 4k view on my 2-month channel (i think it's good for a small channel like me to grow up) thank you, sir... it a really good video... Hope I will more consistent in making a video like you... - love from Malaysia
It’s Beautiful 👏🏻👏🏻👏🏻👏🏻👏🏻
You could have added a sound bar on top of the lift so it sounds nice and just to level it out more
Going with more of the aluminum that you used for the corner would look good for the floor trim!
Yup, that option is definitely one of the finalists! 👍👍
I know I'm a year late but u have a router.. u can make any kind of trim you want brother... I'd get creative with it, and really make the piece your own.. great build and vid by the way.. it looks really amazing..
Wow! You are good!!!
Jacked and Plaid. Great build bro
Thanks Shant!!
Thanks for sharing good video 👍🏼
cool project! THe foam is key to cut outs
Thanks Matt! Yea, the foam worked like a charm
I have a question Mike! When youre wet-sanding the concrete, doesnt it leave water stains on the concrete? Or change the chemistry of the concrete? I think you once said that water will ruin the concrete's chemistry; which is also the reason you are applying seal on it.
Too much water in the mix is bad, but at this point it's cured to the point water won't affect strength
@@modustrial that's good to know! Thank you for the fast reply :) Cheers :)
No problem!
These build videos are awesome. i've been considering getting back into shop work and am thinking about making this sort of thing for my parents.
Thanks, and go for it! It's so rewarding when you can make something for someone else, especially your parents.
That is too cool! Well done!
Thanks brother! 🙏
the banana cover was created by the tension in the concrete. The formwork must be firmly on the subsurface. 👍
Have you tried placing tape on the cut line? Seems to work... try it.
diy perk also did this but from almost all scratch materials
Very well made, looks great
Thanks much! 😀
For the baseboards just do 1x4 pine stain it with dark walnut it comes out very nice
Good idea!
Really cool build! For the bottom trim, why not just use the black aluminum as you did with the side if just for the lift box.
Thanks! That is definitely an option, I just wanted to explore ideas and see if there is something else that would be cool.
I would love to do this and n my RV. Can you think of a way to make the concrete lighter? Maybe some sort of filler in addition to the glass fibers?? I want to build a TV lift cabinet with storage drawers and have the top and the kitchen counter match.
You can add some lightweight foam aggregate to reduce weight. Fishstone has some on their website
Definitely some reason to study harder ;)