Installing a Mustard Bikes tail tidy on a 2014 MV Agusta Dragster 800
Vložit
- čas přidán 23. 07. 2024
- A step by step run through of the installation process for the Mustard Bikes 2014 MV Agusta Dragster 800 fender eliminator.
This product is available from the following link:
www.mustardbikes.com.au/14-20...
This video should help you understand where parts are and how to install your fender eliminator, it is a comprehensive how-to and should allow most customers to complete the installation on their own.
If you experience installation issues please contact us via our help email provided on your product card, we are always happy to help where we can!.
Thank you for watching, and don't forget to give us the thumb's up and subscribe!
Tail Tidy: www.mustardbikes.com.au/14-20...
Mustard Bikes Apparel: www.mustardbikes.com.au/apparel
Website: www.mustardbikes.com
Facebook: / mustardbike
Instagram: / mustardbikes
0:00 Intro
0:35 Required Tools & Box contents
1:17 Removing the stock fender
3:34 Replacing the axle pinch bolts
3:48 Accessing the wiring
4:56 Re-routing the wiring
6:49 Fitting the tail tidy to the bike
8:11 Re-connecting the wiring
8:48 Aligning the tail tidy
9:35 Finishing up and Outro - Auta a dopravní prostředky
Top man thanks 👍
Rad! tyvm
You will need 10w 39ohm resistors to get indicators to flash at correct rate if fitting after market led indicators
Hi Neil, thank you for sharing this.
Please pay close attention to the part where he says to replace the bolts with the provided ones... if you try to put the same bolts back in your rear wheel, they will not sit all the way in and will cause your chain to sag and make a very unsafe ride.
Do you have any oem rear license plate fenders with side arm bracket available for sale? My bike was rear-ended and I need to find a replacement oem fender to fix it. The fender is hard to find in the US. Thanks.
Hi, we only manufacture the product. The bike used was purchased and the OEM arm went with it. Sorry we can't be of more help. You could always fit a fender eliminator! That we can definitely supply.
Hi the u have any led buld headlight for mv agusta dragster 800rr 2017
Hi Mauricio, unfortunately this is the only Dragster 800 product we make.
Can you play the middle harness because I can really see in the video it's too hard to see the photo thanks
Hi Mauricio, you need to cut the cable tie holding the wiring harness and ABS line together (be careful not to cut the lines). We were unable to get a clear image with the camera, hence the photo. If you look into the area circled by the red circle and follow the wires you will find the cable tie we are talking about.
Hope that helps.
@@MustardBikes thank you for you help
I have a MV Agusta Dragster 800 RR 2019. I would like to know if it works for my motorcycle.
Hi Julio, Unfortunately this does not fit the new shape 19 Dragster 800RR.
@@MustardBikes thank you for your response. Please, continue with your canal, it help us very much!
bro when u remove the rear guard tail u use OEM bolts to put it back?
All the required bolts are supplied in the kits.
Mustard Bikes is everything on this bike same on the Rivale?
@@Bapekq the Rivale is completely different to the Dragster. This product is designed for the Dragster 800 only.
@@MustardBikes oh ok thank you,it looks the same lol
@@MustardBikes u have kit for Rivale?
I have 2017 mv agusta dragster 800 rr the fit in my bike
Hi Mauricio, yes, this will fit your bike.
Hello it’s ok for 800 dragster RR 2015 ? Thank you
Hi there, Yes this fits the 2015 RR!
@@MustardBikes thank you for the answer, the two screws are provided for the oscillating arm ? Thank you
@@vincentthenaux8754 yes the two bolts are provided.
What about indicators?
Hi Jared,
This product is designed for use with most aftermarket 8mm bolt style mount indicators. As they are relatively simple to fit, but are also all different in design we opted not to include their installation in this video.
Due to the design and size of the original indicators and the interference they would cause with brake light visibility it was chosen not to use these.
We hope this helps!
Does this fit the rivale 800?
Hi there, unfortunately no, it does not fit the Rivale 800.
Please pay close attention to the part where he says to replace the bolts with the provided ones... if you try to put the same bolts back in your rear wheel, they will not sit all the way in and will cause your chain to sag and make a very unsafe ride.
Good point! And the reason we supply the extra bolts.
@A1 J1 they are a 50mm bolt.
@A1 J1 we aren't aware of anyone that makes one that mounts there. If you do remember to take into account the rear suspension travel. The bolts we supply do not have the hole down the centre. The hole is just weight saving, and quite common on high end or competition motorcycles.