Video není dostupné.
Omlouváme se.
How to replace a Traverse Headlight Bulb
Vložit
- čas přidán 29. 07. 2021
- In this video, I show how to replace a headlight bulb in a 2015 Chevrolet Traverse. This should be the same procedue on the Buick Enclave, GMC Acadia and Saturn Outlook. It is pretty straightforward.
Thanks for showing how to unclip the bulb from the wire. All other youtubes showed the grey connector where you pinch the two ears. You showed what I have, a black connector with a single detente in the middle. I couldn't have figured it out since I could not see the connector and had to work by touch only. Thanks!
First video to explain how to disengage the bulb. 34 minutes into it. THANK YOU!
You’re welcome
Thank you so much! Guy wanted to charge us $160 to put the bulb in at the shop. Saying he had to take the whole bumper off. Guy was all under the hood!!! I told my husband that's BS! Showed him your video he did it in 5 minutes!
Awesome. You’re welcome.
Exactly what I needed to see to fix my headlight today. Thank you!
You’re welcome
Worked 100%. First thing I did was pop the hood and then wtf? This video is spot on for my 2017 Traverse LT AWD. I played the video while performing the steps. Its tight but can be done. Turn wheel to opposite side you are working. I used a small 12V impact drill. It fit no problem. The harness is toughest part to be honest
Great step by step video … my dad needed this … thanks 🙏👍
You’re welcome!
Thank you! This was very helpful!
You’re welcome
Very nice video. Thanks
You’re welcome
Same happened to my wife's Traverse! Just had the shop replace the passenger bulb, not 4 weeks later the other side is out.
Crazy, right?
Both of my headlights went out at the same time! Got pulled over last night for driving without headlights. How in the world do they both go out at the same time
Crazy. It happened exactly at the same time? Doesn’t sound like bulbs. Sounds like a fuse or wiring.
What a pain in the ass
Honestly this isn't the right way to do it if you turn your steering wheel towards the inside whichever side you're doing and you take the two-star bolts out of the cover pull the cover open a little bit and you look up and you'll see a round cap you open the cap turn the light bulb pull it out disconnect put new one on and reverse process
That’s exactly what I did?