CAK-223FW X250 FRESH WATER TANK KIT + WHITE FILLER CAP, DUCATO, RELAY, BOXER MOTORHOME ( 91 Litres) CAK-224W X250 DUCATO, RELAY, BOXER WASTE WATER TANK KIT MOTORHOME (50 LITRE CAPACITY) we got ours from 3leisurelines.net as they are vehicle specific kits, so fit perfectly to the undercarriage. I hope this helps and best of luck with your build. Sorry for the delayed response.
The switch: www.amazon.co.uk/dp/B08JCTNGGR?psc=1&ref=ppx_yo2ov_dt_b_product_details The valve: www.amazon.co.uk/dp/B06XWGF3CX?ref=ppx_yo2ov_dt_b_product_details&th=1 for the valve, i think their are cheaper options, but i opted for this one myself on the hope it would not go wrong over time. The way i wired the system into the main van battery means you need the ignition running. you could opt to use the leisure battery so you dont have to have the van running. My logic was that i will always be driving to the water dump point on the way out of a site.
Hi 👋 working my way through your videos.... Can you tell me what water level controller you used with them 175mm sensors please and did you have any problems with it?
@@jimagnew1305 www.amazon.co.uk/gp/product/B08HZ8H71Q/ref=ppx_yo_dt_b_asin_title_o09_s00?ie=UTF8&th=1 and www.amazon.co.uk/gp/product/B0B6FV21TG/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&th=1 no issues at all as they work a treat. its a simpler magnet on a rod and then the dial moves based on the position. its really simple but works well. just need to make sure you get the correct size for your tank. my fresh water one is a little small so doesnt show any water until i am 1/5 full.
The Online Tank Store now have vehicle specific fresh & waste water tanks for the Ducato, Relay & Boxer vans, with fitting & plumbing kits!
The window, water tanks and then underslung gas were the hardest jobs in that order.
Hello, what is the capacity of the tanks? thank you
CAK-223FW X250 FRESH WATER TANK KIT + WHITE FILLER CAP, DUCATO, RELAY, BOXER MOTORHOME ( 91 Litres)
CAK-224W X250 DUCATO, RELAY, BOXER WASTE WATER TANK KIT MOTORHOME (50 LITRE CAPACITY)
we got ours from 3leisurelines.net as they are vehicle specific kits, so fit perfectly to the undercarriage.
I hope this helps and best of luck with your build. Sorry for the delayed response.
Hi there mate, could you give us a link to the valve and switch you used?
The switch:
www.amazon.co.uk/dp/B08JCTNGGR?psc=1&ref=ppx_yo2ov_dt_b_product_details
The valve:
www.amazon.co.uk/dp/B06XWGF3CX?ref=ppx_yo2ov_dt_b_product_details&th=1
for the valve, i think their are cheaper options, but i opted for this one myself on the hope it would not go wrong over time. The way i wired the system into the main van battery means you need the ignition running. you could opt to use the leisure battery so you dont have to have the van running. My logic was that i will always be driving to the water dump point on the way out of a site.
Hi 👋 working my way through your videos....
Can you tell me what water level controller you used with them 175mm sensors please and did you have any problems with it?
@@jimagnew1305 www.amazon.co.uk/gp/product/B08HZ8H71Q/ref=ppx_yo_dt_b_asin_title_o09_s00?ie=UTF8&th=1
and
www.amazon.co.uk/gp/product/B0B6FV21TG/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&th=1
no issues at all as they work a treat. its a simpler magnet on a rod and then the dial moves based on the position. its really simple but works well.
just need to make sure you get the correct size for your tank. my fresh water one is a little small so doesnt show any water until i am 1/5 full.