For the ecu, putting that cap on the front like you said is ugly it will also eat up a lot of money that could have been spent on an ecu, an aftermarket ecu will also make way more power due to the resistors, they like to burn up and they don't deliver the same as they did new...you will like the extra power. You could also notch out the fire wall if you know how to weld, doing this does keep the super reliable distributor, but is a pain to change cap and rotor, the cap and rotor will last years though, this could be done and use the stock ecu or use a aftermarket, it being aftermarket coil on plug is still probably the best option. But if you have the money you won't regret an aftermarket ecu, haltech is one of the best with lots of support, their headquarters in America is in my home town of kentucky.
Fairly common swap where i'm from. Have done a few myself. Coil pack mod with propper plug gap always solves the dizzy issue. Merging the loom is strait forward as all the wires hsce their counterparts in both looms. You are going to enjoy the peaky nature of the engine
I can hook you up with a Megasquirt since I’m a dealer. You can mount a trigger wheel to the crank and use coil on plugs then. Wouldn’t cost nearly as much
If you don't mind for one of the videos can you go over the vacuuming routing you did. I did my 20v swap and im unsure if I routed everything correctly
Probably wouldn't be a bad idea to make the belt tensioner a solid, the hydrolic bt tensioner fails time to time, bending 20 valves/$. Don't do the silvertop/16v oil pump, it requires running the smaller silvertop belt.
Riley i absolutely love your videos man. I just wanna tell you that there is a slide hammer attachement for removing dowel pins, much better than vise grips. Also, with a 20v equippped car, the twin cam 16 decal is kinda innapropriate isnt it? Anyway, really love to come back from work and sip a beer watching your vids
Go ahead and take that heater hose valve off before you destroy it taking that engine in out...it happens. And that vinyl hose is not going to last the heat and is going to look black from the oil in no time.
you never really went over what you ended up doing for the 20v alternator bracket! did you end up cutting or grinding off the bolt hole on the bracket that shares the same stud as the engine mount?
Hey love the vids when dizzy is on 1 in its original spot with the relocation kit it points too 3 at the front so how did you set up the wires does 3 become 1 and so on or am I getting something wrong 😂
I'm new to the Toyota game. Idk why toyota machines all their hardware so that the middle of each bolt is bowled out slightly. When they start to corrode the hex section just crumbles. I have been fighting this on my pops old 2uz in his 4runner. Was this to save weight or something? Its mad annoying when you own a toyota in the rust belt.
Hello, how you doing? Can you give the feedback or even make a video(that would be great) of 4age vs 3sge beams i would like your personal opinion about the 2 and driving them wich One is best to swap and drive etc. Thanks and goodluck!
Black top 20v vs beams 3sge Wich would u do and why and why not Go link itl be well worth it and its keep your moter safer but its your car not my car so u do u fam
The only reason he wouldve done that is if he left the distributor in the same location as its factory location, which wouldve become the rear. you can see at the end he mounted it to the front. so no.
@@olivevideogames ah didn't catch that in the end. not big on the relocation myself. so wanted to see ways of how other people bash in or cut their firewall.
@@jonahheu Look, to each their own....but why on earth would you bash in a perfectly good firewall if there was no need? especially on a car like this? There are other options that are cleaner if that is your concern. Go coil on plug like he said for about 1,500 or just get the sensor and trigger wheel set up for a lot less.
Okay the dowel pin removal pop was hilarious
I love the 20 valve, can’t find anyone on yt with a channel like this without coming across someone ls swapping their 86
_Vibin._
Enjoyable, informative, chilled content as per usual. *Positive Squad!*
im smoked out at 10am on a saturday watchin this guys fresh new vids is a vibe
"That was a 5 minute clip just talking about an engine...shit..."
driving 4 answers: *am I a joke to you?*
I think it would be super awesome to see you retro fit the AC! Too many people get rid of AC, but it’s your street car and it’s a must!
Just ordered my sticker that's going on my SR5 silvertop hatch
better content than more skids
For the ecu, putting that cap on the front like you said is ugly it will also eat up a lot of money that could have been spent on an ecu, an aftermarket ecu will also make way more power due to the resistors, they like to burn up and they don't deliver the same as they did new...you will like the extra power. You could also notch out the fire wall if you know how to weld, doing this does keep the super reliable distributor, but is a pain to change cap and rotor, the cap and rotor will last years though, this could be done and use the stock ecu or use a aftermarket, it being aftermarket coil on plug is still probably the best option. But if you have the money you won't regret an aftermarket ecu, haltech is one of the best with lots of support, their headquarters in America is in my home town of kentucky.
Giving me more motivation to work on my winter project, loved the music in this episode!
Fairly common swap where i'm from. Have done a few myself. Coil pack mod with propper plug gap always solves the dizzy issue. Merging the loom is strait forward as all the wires hsce their counterparts in both looms. You are going to enjoy the peaky nature of the engine
The first time you had DJ smokey on here I was so proud.
Those silent Hill 2 vibes
When I hear the Smokey montage music, I know it’s going down
Very cool.
hell yea, glad to see the progress and looking forward to getting my sticker.
Dowel goes pop, excellent editing
Great video!!
I can hook you up with a Megasquirt since I’m a dealer. You can mount a trigger wheel to the crank and use coil on plugs then. Wouldn’t cost nearly as much
i went with a Link, thanks though!
The noise when the dowel came out though...
sneak edits
Wow I really dig those green trumpets! Hardly ever see green. That 20v looks really clean man
Will put in an order for stickers today, love your builds.
Really love the channel and your ae86 Reilly, cant wait to see how it evolves!
This is good.
🌸P O S I T I V E S Q U A D🌸
Hell yeah best car channel on CZcams
Just bought a bb star sticker love your videos max from Australia
Hell yeah this is going to sound so awesome with those itb's
Awesome content as usual! I will be ordering a sticker or two on Friday!
I know you say you don't need a/c since you're in Washington but it would be dope to see you retrofit some 20v 86 action
Just realized you were local to WA, I’m currently building another 20valve powered car myself. Congrats!
Ummm I love your Miata
The cleanest shitbox in the world
If you don't mind for one of the videos can you go over the vacuuming routing you did. I did my 20v swap and im unsure if I routed everything correctly
Hope you have some better luck with this one man 🤙🏻
man, you make this seem too easy. jajaja Can't wait for the next video.
I'm sorry Mr Reilly I'm really sorry man
Watching from south africa ive got the same motor aswell in my fwd ae92
They power washed that engine real good
Most jdm importers pressure wash and paint their engines/transmissions.
Probably wouldn't be a bad idea to make the belt tensioner a solid, the hydrolic bt tensioner fails time to time, bending 20 valves/$. Don't do the silvertop/16v oil pump, it requires running the smaller silvertop belt.
Song at 8:24 might very well be predicting our near future
Riley i absolutely love your videos man. I just wanna tell you that there is a slide hammer attachement for removing dowel pins, much better than vise grips. Also, with a 20v equippped car, the twin cam 16 decal is kinda innapropriate isnt it? Anyway, really love to come back from work and sip a beer watching your vids
Tus videos son una motivación para mi , gracias por compartir .
wocky slush
Go ahead and take that heater hose valve off before you destroy it taking that engine in out...it happens. And that vinyl hose is not going to last the heat and is going to look black from the oil in no time.
Build it and they will come.
loot into speeduino my g
you never really went over what you ended up doing for the 20v alternator bracket! did you end up cutting or grinding off the bolt hole on the bracket that shares the same stud as the engine mount?
A/C compressor. Not condenser. The condenser sits in front of the radiator.
Did your crane lifted up to the maximum extension at first or did you do something to it? Mine doesn't get past 70º as your does
Hey love the vids when dizzy is on 1 in its original spot with the relocation kit it points too 3 at the front so how did you set up the wires does 3 become 1 and so on or am I getting something wrong 😂
I'm new to the Toyota game. Idk why toyota machines all their hardware so that the middle of each bolt is bowled out slightly. When they start to corrode the hex section just crumbles. I have been fighting this on my pops old 2uz in his 4runner. Was this to save weight or something? Its mad annoying when you own a toyota in the rust belt.
Probably reduces cost of the hardware due to less material needed
Dj Smokey still makin beats? Anyways love this videos
Hello, how you doing?
Can you give the feedback or even make a video(that would be great) of 4age vs 3sge beams i would like your personal opinion about the 2 and driving them wich One is best to swap and drive etc.
Thanks and goodluck!
I'll buy one too riley thank you for these videos I have a silvertop I dont know if I want to put it in my aw11 or a ke70
Look into an Emu Black thousand bucks
What ECU are you running? Oh btw this video is very therapeutic.
I like how you don't have 10 cars, keep it simple. Are you in the Tacoma area?
I just started my automotive channel, I’m also working on my corolla hopefully I get better content soon
Should have gone Kswap
😍😍😍
Dab intros
Is the 20 valve the one takumi put in after his blew the 4age
Black top 20v vs beams 3sge
Wich would u do and why and why not
Go link itl be well worth it and its keep your moter safer but its your car not my car so u do u fam
Hey what have you done with the front wheel drive gearbox. Is it for sale
I've heard a lot of people are K swapping them, despite the few you've blown still think Toyota's engines are more fun.
Can you show how to wire it. Video pls
Looks awesome. Did you have to bash the firewall at all?
The only reason he wouldve done that is if he left the distributor in the same location as its factory location, which wouldve become the rear. you can see at the end he mounted it to the front. so no.
@@olivevideogames ah didn't catch that in the end. not big on the relocation myself. so wanted to see ways of how other people bash in or cut their firewall.
@@jonahheu Look, to each their own....but why on earth would you bash in a perfectly good firewall if there was no need? especially on a car like this? There are other options that are cleaner if that is your concern. Go coil on plug like he said for about 1,500 or just get the sensor and trigger wheel set up for a lot less.
Where did you find the engine ? I'm looking for one but u can't find any. I'm in California
have you got IG? wanted to make a few questions because of the 20v vs beams
Another video so soon? Let me go get a Corona Familiar to celebrate.
wtb corolla
*drools at the 6 speed* 🤤😮those sell for a fortune here its annoying af.
what you did with the gearbox
paint the green intakes wrinkle black
Hey Reilly I'm sorry for stocking you I will never bother you ever again
Just in time, on shitter atm
i want that 6spd
you have a FWD set up?
What are you gonna do with the fwd 6spd trans?
Yeah I second that I want it for my aw11 lol
Y NO 2J ?! ARE U EVN REAL YOUTUBR
What gearbox are you using on the 20v ?? what is the best one to use?
Probably the stock T50
Hey man, anything I can do to help someone giving me free content to watch and learn from when I’m chilling at home!