great video, I have a question though: at the 7:54 we see, that the com. protocol is set to Ethernet/IP, Is this a must? or may I change it to Modbus TCP/IP and still communicate with the robot? Thanks again for the video.
Hi this video was great! Perfectly timed and details were well explained. I have one question, can you use Blob tool instead of Pattern? In my application i need to pickup various shapes and sizes and I think it can only be managed by using a blob tool. i would really appreciate your response.
Hi Medhi, you are able to use the Blob tool. However the blob tool does not give you an accurate angle as the pattern tool does output an accurate angle.
Hi Carson, this would be a pretty complex application. There are too many moving parts for the “wizardized” approach that the URcap takes. To discuss more application details, you could definitely reach out to us directly, and we'd be happy to assist you further. Our email for general query is info@acs-ga.com, and our phone number is 800-969-7772. Thanks!
The 7200 is more difficult to communicate with. If this is what you need to use then each piece of data will need to be brought in individually. What state are you located in?
I mounted Cognex camera directly to ur5 and removed end effector. How to find TCP and build communication between robot and camera
thank you
You're welcome
great video, I have a question though: at the 7:54 we see, that the com. protocol is set to Ethernet/IP, Is this a must? or may I change it to Modbus TCP/IP and still communicate with the robot?
Thanks again for the video.
after calibration, I saved as the job but when I create a new job, there is no .cxd file to import. Have you ever encountered this problem?
Hi this video was great! Perfectly timed and details were well explained. I have one question, can you use Blob tool instead of Pattern? In my application i need to pickup various shapes and sizes and I think it can only be managed by using a blob tool. i would really appreciate your response.
Hi Medhi, you are able to use the Blob tool. However the blob tool does not give you an accurate angle as the pattern tool does output an accurate angle.
Yes you can!
so could this work with a ur5 and a mobile robot platform to deliver the robot to different work locations? thank you
Hi Carson, this would be a pretty complex application. There are too many moving parts for the “wizardized” approach that the URcap takes. To discuss more application details, you could definitely reach out to us directly, and we'd be happy to assist you further. Our email for general query is info@acs-ga.com, and our phone number is 800-969-7772. Thanks!
Hi, can I use a camera with an older version (cognex model IS7200).what do I need to do?
The 7200 is more difficult to communicate with. If this is what you need to use then each piece of data will need to be brought in individually. What state are you located in?
@@ACS7420
Thailand
can this camera controlled remotely via URscript ?
You are able to communicate and pass data to this camera via UR script commands