Dayan TengYun M In-Depth | SpeedCubeShop.com
Vložit
- čas přidán 15. 02. 2019
- A cheaper GAN 356 X?
SpeedCubeShop ► bit.ly/2nW3qWg
Using the code "JPERM" supports my channel and also gives you a discount on your order.
DaYan TengYun M 3x3 ► bit.ly/2DWQdG2
Beginner:
2x2 Tutorial ► • Learn How to Solve a 2...
3x3 Tutorial ► • Learn How to Solve a R...
4x4 Tutorial ► • Learn How to Solve a 4...
5x5 Tutorial ► • Learn How to Solve a 5...
Special Tutorials:
3x3 One Handed ► • Rubik's Cube: How To S...
3x3 Blindfolded ► • (v.2) How to Solve the...
Advanced Tutorials:
2x2 ► • How to Get Fast at 2x2
3x3 ► • Beginner + CFOP Method
4x4 ► • How to Get Fast at 4x4
5x5+ ► • How to Get Fast at 5x5...
Facebook ► / jpermcubing
F2L Algs ► bit.ly/bestf2l
Patreon ► / jperm
Merch ► teespring.com/stores/jperm
Special thanks to these generous Patrons:
Soyale, Jack Gore, Gregory Martin, Kemen Freeman, Michael Mendoza, Ed Connell, Julian Lohuis, Pete Ryland, Jan Strohbeck, KingIceCream, Matt Hart, JλyClip, Namir Smadi, Adam Fenn, Joseph Elizalde, Paul Thorley, Amay Saxena, Aaron Crouch, Weisselberger Timothee, Philippe Schwartz, Tylor Waters, Ludvig Lagerstedt, Jonas Rongé, Pontus Uggla, Peter Preston, Neini, Michael Shu, Takeshi Yanagita, Jane Qiao, Adam Prato, David Yang, Ricky Robber, Aaron Spiller, The Slick Cuber, Austin Shaw, Ronan Hanley, Eric Colon, Adam Rosales, Austin Brunell, Edan Maor, Grace Ganzel, Martijn Schiedon, snackers1234, Matthias Gärtner, David Brown, Nicholas Johnson, Taco, Mike Sampson, Siege Wolfe, Mark Fisher, Carl Dworzack, Rob Peters, Miranda Manning
It's very refreshing to actually hear new stuff in reviews. :) 10/10 for the corner cutting Explanation.👌👍
This
I like your logo . its gohan
I like anime
What da fuck I was Just watching you ahh. Never knew you cubed until I found this 1 year old comment
I totally disagree with him cuz no one uses that corner cutting , if u think he used that well that means hes sucks. Im 11-12 seconds i never have that problem and i Will never use that corner cutting
"Do you want the 60$ Gan356 X for half the price? Well you're not getting it" 😂😂😂
Lol
In malaysia,we actually have to multiply us currency with 4.6,so then a Gan356 X will cost 276 malaysian currency and tht costs alot. Im actually bummed by this.
TSM_Myth I’m Malaysian a chinese website sales the gan x for rm189
sean cuber yea
@@tanyile4270 in my country you multiply it by 50 then its 3000 but I saw a site that sells it for half the price
I watched a 2 min ad for you.
Love from New Zealand, where cubes cost a crap ton, quite rare, and where shipping also costsssss alooooot.
poshua piiim I bought a 12 dollar “cube”, and it cost around $30 with shipping.
Use cubezz. It’s always free shipping.
Aidanplays22 is it a discount code
That's horrible to get something so cheap and be forced to pay so much more. In California is just a simple 3$shipping charge for a normal purchase. About-give or take- some money.
That could force someone not cube for prices that high...
@@IllShivyou r u feeling good? YeS iTs A dIsCoUnT cOdE.
Of course not. Its a cubing website. Free shipping and cheap cubes.
1:30 They also revolutionized stability in 2011 with torpedoes on the LunHui, ZhanChi, and then GuHong V2 and LingYun V2 in 2012.
"Do you want the $60 GAN 356X for half the price? Well you're not getting it."
GAN 356M: allow me to introduce myself
EpicNinja46 😂😂😂
Tengyun v2 to gan 356m: oh hi, little brother.
Right though
y u copy
Dayan Tengyun v2 is better lol
ShengShou Aurora + modern hardware + stick of butter = DaYan Tengyun
Twistii Cuber hi
not quite
+magnets
The Cubing Cuber magnets=modern hardware
Hi
It’s because there’s more space in the middle area between the pieces of the tengyun. This lets the pieces move more relative to each other
That could be right but the gan x had the same problem and that has almost no gaps
7:45 “Oops. That worked for some reason”
Pretty much sums up my mood when I get (what I consider as) a pretty decent solve with the MGC V2.
I've been waiting for so long for this
Like 1 week?
Me too
The quality of your videos have improved really very much. Keep improving.
great review! i have already ordered the dayan tengyun and waiting for it to arrive! glad you to take the time and effort to make this video!
Is it good? Stable?
shengshou: we are coming back!
witeden: hold my beer
alpha: beer my hold
dayan: hold my beer my hold
EDIT: Woaj likes
I'd love to see a modern Alpha
Hey Bruce
@@MCubes hello
BSK Cuber why hello
@john tan wut
this video is the first video that inspired me to get into cubing i was like WHATTTTT when u turn fast thank you Jperm
LOVE the beginning
At 6:31 and 7:02 he explained how moment of inertia and friction works on corner and edge piece ....
AWESOME!!!!!
6:22 it’s just a theory. A CUBE THEORY
It is 24:00 now in my country, you uploaded this video right at 12pm that insane :)
Similar with me
He can schedule the video lol
@@JIAYANG its 19:30 in my country xdd
Wait are you from Vietnan
@@brandodio5910 You can see from her/his name :p
J perm:This is why the GTS 3 is my main
Gan:heres the gan xs
J perm:Scratch that
Lol
Nice analysis of the mechanics!!!
I picked up one and lent it to Coach Tabe Cubing for an unboxing and review. I'm nowhere near sub 15, so this might be the cube for me. I was impressed with the Zhanchi from DaYan -- as it was such a leap of improvement over what was available then. So I'd like to see DaYan get back into the game.
FINALLY dayan returned
Yeah the cube looks amazing.
I just bought mine today. I'm really excited. It will be my first magnetic cube
Is it good?
You're one of the best youtubers on earth!
I didn't know there was still active Speedcuber channels!
BTW love the video!
DAYAN IS BACK...
?
yes
Considering that I love over turning cubes, this is my best cube yet.
Dayan is back !!
Your reviews are really cool,J Perm!
Every cube companies' target:
Make a cube as good as gan x but the price is half of gan x's price
Gan cube companies' target:
Make a cube as good as gan x but the price is twice of gan x's price
other account *better than the Gan X
A half gan x
Gan cube company's target:
Make a cube that is half as good as Gan X but the same price
and also fail
Well played J Perm, now I want this cube.
Dude your theory is great wnd I think its right on point. Keep up the great work!
At last!! Waiting for it so long!! You r the best j perm!! Thx a lot for this review!!
How Many Other J Perms Are There?
Thanks for the review again
I love this cube. I've been using dayan cubes since the guhong, it's crazy how far they've come
How much smototh is it
@@mearttofan2572 what do you mean?
@@chimchu3232 I heard this cube has great slices, is it true?
It’s my main, but the issues you have are the exact issues I have. I don’t like any other cube that I own (including the gan air um and the cubicle pro shop Valk power m) due to the magnet strength/speed. I’m thinking of getting the gts3m but I’m happy with this cube for now
I want to get this so I can practice in the mornings
I am beginner, I mean I know to solve it in 1-2 minutes with original rubics cube, should I buy this?? If no which one?? PLEASE HELP
@@tennismaster6640 if you're averaging 1-2 minutes you should go for the rs3m 2020. amazing cube, low price, amazing for begginers (also amazing for intermediate and advanced solvers but u get my point)
@@caioellery9117 I ordered this one already... thanks
If you are averaging 1 to 2 minutes get faster learn cfop then get rs3m 2020 but clean it and lube it trsut me I dditn clean it nor lube it and it couldn't even corner cut 15 degrees and now that I did I can corner cut 50 degrees it's really stable with extra magnets and quite fast
@@tln_greks2896 thanks man
I know that this video is old now but I was just doing some testing about what you were saying about the reverse cutting. What I've decided is that it's the ridge on the center piece. The ridge will stop the edge from twisting as much as on other cubes. The reason why some cubes (like the tengyun) are worse is that there is not flush contact between the center and the edge, allowing more room for twisting. Although what you are saying is correct, that alone isn't enough to make any of them actually work.
I tried this experiment on a little magic which doesn't have ridges and it worked mostly good, so I don't think that's the reason
I tested some more cubes and I was wrong, you might be on to something, I think it's not the room inside though it might be the fins on the edges, the tengyun has fins but they're tiny compared to the gts3's.
Nice video!
im not even gonna lie i really like the inside and outside look of the tengyun
Best cubing channel!
ezcubing: no i am!
@@charon116 no u! Oh wait..
Good job
Told you I’d say good job on every video from now on
I will be the judge of that.
Steve Henderson thanks man
"Do you want the 60$ Gan356 X for half the price? Well you're not getting it"
Gan - Hold my 356M
3:08 I don't know about anyone else, but I have never in my entire life done this kind of a move.
Wow there are sooo many cubes in the market. I'm still buying Moyu Gts3m
The best review i seen ever 😮😮
Great review :) I'll have to give it a try. It would be nice if you would include where each of the magnet sets on the 356X fall in your Strength vs Speed graph though.
my new main its rly good
I have never seen a cubing video so informative before
Can you make a video or unboxings or tutorials about non - WCA puzzles? It'll be really fun to see you doin' those stuff.
Jperm have you tried out the different springs? when I did that it helped a bunch
Whoa he is improving
So, I ordered this cube up based on this video showing how quiet it is. I do a lot of night solves in bed next to my wife while she is falling asleep and was looking for something quiet as to not disturb her. Moving from a GTS 2 M. Really hope there is a noticeable difference.
Lol update?
and what happened? 👀 i have the same problem, I want to do night solves too
Well that start crushed my dreams fast
This cube sounds perfect for me
Wow
This Cube Very Smooth
top cubers i think you are one of the top cubers
Just a thought on the corner cutting thing, i think the gts3m likely can cut it better like that as it has rounder corner pieces than either the gan 356 x or the dayan cube, so the rounded corner slides easier into place
Idk if this is accurate but looks like what is happening to me
2:23 rip cube (and laptop)
Everyone else: Dayan Tengyun M
Me: Dylan Tengyun M
Ur so close to 300 k subs
My boi verified okaay okaaay
thank u j perm
2:32 Your speed is INSANE!!!!!!!!!
Yes
Lucas etter won his second comp after a year !! Yay
Im looking for a new main bc my rs3m has started slowing down but i also wanted something relatively quiet. Im not the fastest turner so this cube looks perfect for me. Thanks for the brilliant review :)
Wait if you mean like the turning starts slowing then just clean it out and then add lube adding lube first is not a good idea
Did you try the other springs? I heard that they can make a difference.
Are you planning on reviewing the kylin too? I just got it and with traxxas 50k and some tenyioning, I really think it's worthy of a review
Wow nice bro 👍👊👌👋👏
physics with Jperm
I just learned intuitive F2L from one of your tutorials. Atm my execution itself is alright but it takes quite a while for me to see the pieces I need to make the pairs. Does this just take practice or is there a better way to learn to see the pieces quicker?
just takes practice
Okay
Hey JPerm, nice video. I recently got this cube, and I want to change the springs. Do you know specific effects of stronger/weaker springs? Thanks!
Weaker springs faster and looser
Stronger springs slower and more stable
My main cube 😎
2022 and this cube is still amazing
have you tried using any other lube to slow it down to fix how uncontrollable it is? I would like to know how it preforms when you use say Angstrom Compound X, or Matian.
This cube is my main, I do see that corner cutting issue, but it hasn't caused any real problems for me when I solve on it. I don't really know if all TengYuns are like that, or if I just have a really good one, I have no idea, but it is my main, and that will probably not change for a very, very long time.
Hey J Perm! Love your videos so much but I have a question. Should I get the Dayan Tengyun M, or the Yuxin Huanlong M? I'm pretty torn between the two and I just need a professional to tell me which one is a better puzzle! Thanks!
I think the huanglong is a little better but the tengyun is very quiet
@@JPerm thanks?!
Oops didn't mean to add that question mark
@@reptotties7410 just edit it
I think setting it up with stronger springs and heavy lubes would help with the uncontrollable issue
I won it for free on the speedsolving discord and thought it was the quiètes cube I’ve ever had
6:44
hMMM...
*Moyu GTS3M TengYun in 2050?*
Too bad the world ends in 2020
@@joobin814 too bad its 2021 now
@@3_peri790 I'm just dead
@@joobin814 nope
How does this compare to the huanglong m? The huanglong m is also soft, smooth turning, has great stickerless shades, quiet. I do have the corner cutting issues with my huanglong where it catches more than my little magic. The reverse corner cutting is worse than what you show in your huanglong review. You think I should loosen it a bit?
Have you considered partnering up with cubing out loud since you’re Canadian ?
Do fmc next
I was half expecting the last solve to be an outtake where the cube popped or something.
Do a review on the yuxin kylin v2 m.
2:32 that was smooth
Dylan Tenyung is so good
"Do you want the $60 Gan X for half the price?"
Gan 356m
lmao
I am beginner, I mean I know to solve it in 1-2 minutes with original rubics cube, should I buy this?? If no which one?? PLEASE HELP
@@tennismaster6640 I would recommend the RS3M2020.
It is an amazing cube and it is extremely cheap at only $10.
@@dpage446 and why not this one, is it too fast for beginners? THANKS SO MUCH FOR ANSWER
@@tennismaster6640 since you are only a beginner, you don't need any fancy cubes, once you get more experienced you will be able to tell which cube you like so it isn't necessary to spend a lot of money for such a cube at an early stage.
3:15 if you loosen the cube, it works
Hey,
My Gan X reverse corner cuts even when I am holding it by the top right edge piece...Btw, nic review, but I am not considering the Dayan tengyun, especially when I got the X a week ago 😉😉
I'm going to buy the cube
2:23 nice +2 bro
Dude is this better then the Valk power
N.P. Cubing I doubt it
the reason you don't feel that it cornercuts that well is probably that in comparison to its super fast and smooth normal turning, cornercutting requires more effort. maybe try slowing it down with some heavier lube and then it should feel much better.
Hey J-perm , as I'm looking for a cheap magnetic cube , do you think the mf3rs3m is a good choice?
haven't tried it yet, I'll review it soon!
That turn speed at 2:32!!!
Is it customizable? Like magnet, tension, or center piece travel?
now its time for dayan tengyun v2 m
True. It's amazing and is my main
Nice review...can you do a critique series again?
Would be very helpful for this community.
Can you make a video on sponsorship and how you got sponsored and also how you grew your channel?