DIY QUEEN SIZE FLOATING BED

Welcome! where are my DIYers? In today’s video, we are doing a DIY project for our spare bedroom. Beforehand, we had not purchased a bedframe for our spare bedroom. So, this was a perfect opportunity to save money, and make an affordable bed frame for our guest room. We wanted to keep this project around $150 and we stayed on budget. This was a simple and fun project, that I feel like any one can do. It does not take that many materials or tools to complete. now, this wasn’t one of those fancy complicated builds. This was made to be simple and easy as I said before. I hope you guys enjoy the video and don’t forget to like, comment, and subscribe.
MEASUREMENTS & MATERIALS 👇🏾
Bottom Frame
42inches (2) width
65inches (2) length
39inches (3) inner support beams
Top Frame
80inches (2) length
60 inches (2) width
57 1/4 inches (4) (approximately for inner support beams)
make sure to triple check your measurements. These were MY measurements. Your measurements might be a little different, but they should be approximately around the same for the queen size bed frame. Also, make sure to measure your own mattress. That is very important. The mattress we have have measured 81 inches.
I did add additional support to the bed so our mattress didn’t sink between the other support beams and corners. 
MATERIALS
2x6 (12) also used the scrap 2x6s for support as needed
2x4 (4) these were scrap pieces laying around from other projects