Queen Size DIY Floating Bed Frame
Vložit
- čas přidán 9. 10. 2019
- ADDITIONAL SIZE BED FRAME MEASUREMENTS PROVIDED BELOW.
Instagram: Curtis_Made_It
So glad you’ve made it this far, I just can’t tell you how easy it is to make your bed look like this for about $120(October 2019), depending on your sources for materials.
You are going to need: *SEE UPDATE BELOW*
UNTREATED BOARDS
*13-2x6x8 (actual measurement 1.5”x5.5”)
* 4 - Simpson Strong Ties (2.5’s)
*1 lb. box of 3” screws
BED FRAME MADE FOR **QUEEN* SIZE BED, MEASURING OUTSIDE DIMENSIONS AT 60”x80”, MADE TO BE FLUSH WITH THE BOX SPRING.
**FOUNDATION**
2 @ 36” {head and foot}
2 @ 65” {sides}
3 @ 33” {supports}
(As seen in time lapse) Screw in from the front of the head and foot board ((36” each)){labeled this for perspective}) into the side boards 65” ea. Measure from the outside, on the edges to line up with the side boards, to 18”, 34”, & 50” and place a mark for the spacing on your support boards inside of your foundation. Screw your support boards in to the center of these marks. This spacing provides 18” from the head and the foot, with 16” spacing in the two gaps in the middle to provide support for bodies that are sleeping.
LED light strips come with an adhesive backing. I didn’t use this and instead for flexibility I simply used scotch tape to attach the lights to the foundation. This allows me the ability to remove them easily if I move.
This may be somewhat out of order, but attach your frame braces (2”x4”, cut to 10” each) to the inside of your foundation. See my King size floating bed frame video to trade these 2x4 pieces for Simpson Strong Ties. Amazon links are commissioned. If you click on any Amazon links in the descriptions of my YT videos and make a purchase, I will get a commission. This is one way you can help support my channel and please know that I only link to products that I actually use myself.
Lights:
www.amazon.com/gp/product/B08...
**BED FRAME**
2 @ 60” (head and foot)
2 @ 77” (sides)
4 @ 57” (supports)
Measure your head board 12” from each side, line this up with the outside of your foundation side boards and attach to your braces. 57” support boards will be measured 10.5” from each end (to compensate for the side boards)...these will be 10.5” and 46.5”. Line these marks up with the outside of your foundation and attach to braces. Attach side and foot boards and you are likely close enough now that I don’t need to tell you to vacuum before you start showing us how you did it. You’ve spent this much time, please leave me a comment. Thanks so much for your time.
This is my first CZcams video that I’ve really put some time in to. I genuinely appreciate any comments you may have and any shares you may send.
*UPDATE*
I ended up just buying a black fitted queen size sheet and slipping it over the frame once I was done. This was definitely the best idea.
*KING SIZE*
I've made a WHOLE video for this one now. Please see the 'videos' section on my channel to find this awesome DIY video.
I have not personally built any of the following bed frames so these measurements are approximate.
*TWIN*
I really don’t know that I would try to build a floating bed frame for a bed with the dimensions of a twin due to the tipping risk, so I’ll say if anyone is going to do this, do it at your own risk, and please be careful. On my queen size, I had a 12” overhang on 3 sides to complete the floating look. Due to the dimensions of the twin mattress, I’m going to shorten this to 10” to hopefully provide more stability and keep it from tipping to one (long) side or the other (long side). Make sure that your mattress measures what appears to be the standard 39”x75”. Building it exactly as I did in my video, the cuts for the base will be 2@65” for the outside & 5@16” for the center supports. Your frame cuts will be 2@75” for the outside and 6@36” for the center supports. - Jak na to + styl
After endlessly looking for a nice solid bed frame to buy, I came to the conclusion that most reasonably priced bed frames online are made cheap. I decided to look up a diy & came across this video. I followed all of his measurements & instructions. I couldn’t be more happy with the outcome. Completed it within a few hours. (My first diy project.) It’s very stable & looks amazing! Thank you for this video!
@Mya Swisher Hey Mya, you are an absolute hero for taking the time to come back and leave your awesome comment and feedback here. I really appreciate that a whole bunch! I would agree with you on the ‘reasonably priced’ stuff. I’ll pin this comment so it is the very first one that every single person will see when they go to the comments section on this video. I greatly appreciate your support, your time, and most especially your feedback for everyone else. You are *awesome*! Sleep well. I hope to get another glorious comment like this from you down the road. Talk to you then.
@@CurtisMadeIt hey I was wondering how are 10 - 2x6x8 gonna be long enough for the sides because they look longer than 2x6x8
@Myles King Hey Myles, thanks for stopping by and voicing your concern here. A quantity of 10 2x6 boards may not be enough for this queen size build, depending on how you are going to do it. I don’t know if you’ve seen the other videos on my channel, but I’ve since modified this bed frame twice to include a storage base and a headboard with more storage too. As far as the length goes, I think my thumbnail picture may be a little bit deceptive. An 8 foot long 2x6 is 96” in length. Here in the USA, our queen size mattress measure 60” x 80”…so the longest the side board needs to be is 80”, unless you are adding the headboard, in which case would be 85.5”. I don’t see where the shortage is my friend. Does my explanation help at all? I’m on Instagram realc_love1. Feel free to reach me there any time and I’ll be glad to further assist as needed. I’ll talk to you again soon.
@@CurtisMadeIt so would I need to cut any wood
@Myles King Yes, you, or someone, is gonna have to cut the pieces of wood you buy in to the correct lengths.
My wife was very skeptical after I told her I was going to build us a bed. I have almost 0 experience with building things. I watched the video a few times and a couple hours later... boom we have a bed. This bed is rock solid and his measurements are dead on. We bought everything from lowes and spent right at $80 (except the lights). Thank you again for a great video and measurements
Darrell Barger Thanks for your time and feedback Darrell. This is unquestionably the best reply I’ve had on this video. You are the real hero brother.
Man I'm new to all this and as a millennial I just got my first set of tools and want to build it for a full size. I'm very skeptical about a floating bed specially since I have company over at times and worried if we both sit or lay down on one side the whole bed would tip haha
Tony Diaz Hey Tony, I’m just now seeing this comment, sorry for the delay. If you follow the instructions I emailed to you, you will be in great shape. This bed shouldn’t tip to either side. I hope this helps!
C_Love1 hey, is there any way that you would kindly email me the instructions too .. I would really appreciate it 🥺♥️
Jessica Atanacio Hey Jessica, I would be glad to! I’m at the day job right now, but I will as soon as I get home. You can leave me your email address here or reach me on Instagram, I’m C_Love1984. Talk to you soon!
I kept looking for a bed design and this was perfect. It was cheap to build, only took about three hours and is very sturdy. Thank you so much for the great bed design!
@Reese’s Beanutbutter You bet my friend! I’m glad this worked out well for you. I appreciate you taking the time to comment here and support this channel. Come back and talk to me again down the road.
Thanks for all the information for this build. My father and I completed this project in one day. We used 2 x 10's throughout the project. Thank you for your inspiration. Very happy
@Jason Day Thanks a whole lot for the feedback Jason, I can’t tell you how much I appreciate it. Comments like this *really* keep me inspired and motivated. I’m glad your build went quickly and apparently pretty well too! I hope you enjoy it my friend.
Made this yesterday. Absolutely amazing! Literally my first time using a drill besides hanging something came out perfect had an awesome night sleep and all!
@Taradaqtyl Hey Tara, you are so creative with your mega awesome YT screen name. Taradaqtyl. That’s so, so wonderful! So glad your build came out great and also glad to hear the first night’s sleep was just as good. Hopefully, you will sleep soundly on your new bed frame forever. I greatly appreciate you taking the time to come back and leave your comments, compliments, and feedback. You are the real hero here. 🙏 Thank you, thank you. Talk to you again soon!
The best thing I’ve seen so far! Honestly the best work I’ve seen in a while. Unique idea and design done by the finest!
Aamir Merchant Thank you Aamir!
Looked for a queen frame everywhere but couldn’t find something simple, strong, and low cost until I found this. My first diy project ever and I absolutely committed. I built it using 2x8x8 and had 0 issues. I wanted a little more height since I’m not using a box spring. I also plan on staining the base and laying a queen sheet over the top like you did. Just waiting for the leds and I have the perfect bed frame imo. Awesome video and tutorial. Thank you 🤝
@unescapablepain8796 Hey Pain, I can't tell you how many times I've heard variations of the first sentence in your comment here. *I* wanted a simple, strong, low cost version of what I came up with when I posted this video. You've already seen how primitive the editing is on this video but it's such a fantastic design that people around the world have commented on how much they love it! I just love that everyone that decides to build it doesn't ever have to worry about the bed post again. I'm telling you, this is a fantastic life power upgrade.
Again, I can't tell you how many times I've heard variations of your second and third sentences here too! You build a small box and then you build a box the size of your mattress. Done deal, easy day...seems like anyone can do it. That's what I was shooting for. I couldn't find anything that was super easy...like...regular person could just up and build them a new floating bed frame if they wanted one. Lots of people have recreated this bed frame in many different variations. I'm glad your build went well, this is fantastic news! In the absence of a box spring, you are gonna need either cedar fence pickets or plywood to support the mattress. Otherwise, it's gonna sag in between the joists in the frame. I hope this is something you've thought about 🤦♂️ .
If you want to spend the effort staining the base, you can, but you are likely not going to see it unless you have a vantage point from far away....I'd recommend saving that time and effort. The fitted sheet over the top is *definitely* the way to go. I'd do this a million times again.
Perfect bed frame in your opinion...and mine...and lots and lots of other people's too! You are very welcome. I'm glad you are at this level of satisfaction with your new bed frame and I appreciate you taking the time to stop by, talk to me, and support this channel. That's super cool of you. Make sure to check out the 2 other queen size floating bed frame videos posted on this channel already before you get too married to what you've got right now. I modified this one to include storage in the base and I added a headboard in a third video. Let me know if you have any questions. I look forward to talking with you again down the road. Take care P.
Built!! Took a day to get everything done. We have a memory foam mattress so we had to get creative with the support. But the frame and foundation are spot on! Wife loves it
@justinadams7901 Hey Justin, this is super cool my friend. I'm glad everything worked out and everyone is happy. I really appreciate you taking the time to come back and leave your feedback here.
Of course, hindsight is 20/20 but others have used either plywood with holes drilled in it or cedar fence pickets slightly spaced apart to allow the mattress to breath for support in the absence of a box spring. You are all done now though. Enjoy your new bed frame 🤝
I just built this for my wife and I.
Super easy to build! Solid as a rock!
Thank you!!
TerryChristine Kubinchak Thank you for your time and the feedback Terry, I appreciate it so much!
TerryChristine Kubinchak I posted the head board modification, take a look if you would like. It’s DIY Floating Bed Frame Part 2 - The Headboard
Thank you!! Definitely doing this in my new place! I also appreciate how cost effective it is!
Boujee ASMR Thank you so much for looking! Subscribe to be notified about new neato content I’ll be posting in the future! Let me know if I can help at all.
Boujee ASMR I posted the head board modification, take a look if you would like. It’s DIY Floating Bed Frame Part 2 - The Headboard
Making this tomorrow. I’m super excited!! I’ve watched other videos but THIS ONE is the BEST!!! 😊😊😊
@Authentic beauty_93 Thanks so much beauty, I really appreciate it! Comments like these really boost me up. This was my first ever CZcams video, and admittedly, not the best one out there in my opinion, but I sure very much love your enthusiasm! Thank you for your support and awesome compliments! I hope you have a safe build. Please let me know if you need anything, I'll be glad to help. Talk to you soon.
Thank you, C_Love. I didn't scroll down far enough in your instructions to see that you recommended the base at 49 wide. I went off your Queen bed and realized that the foundation was 60% width of the 60 wide top. So when I built the king, I built the width of the foundation to 60% of 76 wide which comes to 45 5/8 as opposed to the 49 I read about after the fact. So far, it's rock solid so thank you again this is one of the best instructional videos around.
MD EB aThanks so much for your time and wonderful feedback MD, I can’t tell you how much I appreciate it. I’m glad your build came out well and thank you so much for your kind words. Stay tuned, I’ve got a headboard modification in the making!
MD EB I posted the head board modification, take a look if you would like. It’s DIY Floating Bed Frame Part 2 - The Headboard
Thank you so much for this video! I made this bed frame yesterday and it took me a few hours and cost under 100$. Super sturdy bed frame!
Amy Pringle You are very welcome! Thank you for your feedback, I can’t tell you how much I appreciate it!
Amy Pringle I posted the head board modification, take a look if you would like. It’s DIY Floating Bed Frame Part 2 - The Headboard
How did you get under $100? It cost $105 just to get 10 2x6x8ft lumber at my home depot
@T-Rent Times have changed my friend. This video was made pre-covid...before the massive spike in lumber prices. I share in your frustration at the current cost though. I hope it gets better soon. Let me know if I can help at all.
@@CurtisMadeIt Yeah I realized that after a quick google search :/ Luckily I found someone on Facebook who is selling pieces for $6 each :)
Was so hyped when I finished this today. Took a few hrs, and now I'm just waiting on the lights to come in. I looked at a lot of different styles before choosing this one. Awesome design man.
@nemounstopable33 So glad to hear all of this! I appreciate your compliment, support, and feedback, you are the real hero my friend. I’m cooking up the king size now…stay tuned.
im the real nemo
@The Legend Of Nemo You are.
Thanks for this video. Like many others I used it to build my own bed over the weekend. I got my LEDs coming in a few days and I wrapped the outside of the frame in black fabric also. It only took me a few hours to do everything. I definitely need to get some plywood though because my box spring makes my bed way too high off the ground.
@K1NG MATTHEW Hey Matthew, you are very welcome my friend. I'm glad you are happy with your new floating bed frame! Plywood will definitely take care of your height issue. The deck of my mattress is about 31" off the ground now because of the modifications I've made to this build. It takes some getting used to, but, as you already know, you do have options. Thanks for your feedback and comments here my brother, I really appreciate it a lot. Be careful. I'll talk to you again soon.
SHOUTOUT to Curtis. I saw this video Tuesday/Wednesday night, bought the supplies Thursday & finished it Friday. With the help from Curtis as well. Keep it up, and I’ll definitely be on the lookout for more projects from you!
David Keeton Thanks for the continued support David, I really appreciate it. I was also more than happy to help you. I’ve got more great stuff on the way!
David Keeton I posted the head board modification, take a look if you would like. It’s DIY Floating Bed Frame Part 2 - The Headboard
I built this yesterday. Considering I’ve never rly built anything I’m actually shocked by how good it turned out to be. It cost me roughly £150. Guys honestly you can probably save £60 but like I said I almost had no idea and ended up having to buy more timber. Other than that. Bed is really strong and neat. Thankyou for your guide!
@Jack Bodman Hey Jack, I’m glad your build went well. Thanks for stopping back by and leaving your awesome observations, compliments, and thoughts. You are the real hero here, my friend. I appreciate your time. Stay tuned, I’ve got more great stuff on the way!
Guys this works!!! Perfect measurements!! Read the directions thoroughly and you'll have a masterpiece. 5 out of 5 stars. People are asking me to make them one now!!
Joshua Bryant This is terrific Joshua, thanks so much for the wonderful feedback!
Dam google reading your thoughts
Rusty Shackleford They know everything Rusty, thanks for stopping by and leaving a comment.
Joshua Bryant I posted the head board modification, take a look if you would like. It’s DIY Floating Bed Frame Part 2 - The Headboard
Letting the paint dry on mine👍🏻 made a few changes but over all your design. Thank you!
@tylermaclachlan Hey Tyler, so cool my friend! I'm glad you were able to change it and make it work for you! I appreciate your time and support on this channel 🤝
Just built my floating bed with this video measurements are spot on keep the videos coming. Just bought my first house and I’m always looking for little projects. Next I’m gonna build the cot hole boards you made
Matt Thanks a lot for your interest, feedback, and compliments Matt, I can’t tell you how much I appreciate it. I’m always working on a thing or two. I post about once a month, but I try to make it stuff that is unique and interesting. Thanks for your support brother.
Matt I posted the head board modification, take a look if you would like. It’s DIY Floating Bed Frame Part 2 - The Headboard
I have to say, you’re very talented! This looks like a great project - so glad you made this video!!
Lisa George Thank you Miss Lisa, I genuinely appreciate it a great deal. Stay tuned, I’m working on some more new neato things to show you, and everyone!
Lisa George I posted the head board modification, take a look if you would like. It’s DIY Floating Bed Frame Part 2 - The Headboard
Just built this. Took about 3 hours, easiest design on CZcams for solo construction. Having a box spring makes the top of my bed waaay too high off the ground, so I had to add a cardboard layer stapled all around the top of the frame to distribute the weight evenly across the bottom of my mattress. Masonite sheets would be the next step up for support, but plywood will be overkill. Absolutely love the bed. The amazon link in the video brings you to a 2 pack of LED tape, i bought one 16 foot strip (same brand) at half cost because that's all that's needed for this project.
Cody Rosser Awesome Cody. I need more people like you to leave thorough feedback like this because it really helps others. I really appreciate your time, effort, and support my friend. Thank you so much for everything!
Cody Rosser I posted the head board modification, take a look if you would like. It’s DIY Floating Bed Frame Part 2 - The Headboard
The Fweece is a nice touch. Looks much more finished. Thanks for the whist of measurements. I’ve been trying to find someone who posted more than just a look at what I did video
@Austin Tibboel I appreciate that a lot, Austin, thank you so much. What a terrific compliment. I actually intended the fleece to be a cushion in case I bang my shin in to it, but I haven’t needed it at all to this point. It does look super nice though and I love the way it gives the lights and floating effect a nice, crisp appearance. I appreciate your time my friend, thanks for stopping by.
Just finished my bed with the lights and it looks really nice thanks for the inspiration
@KA1SER Awesome my friend, you bet. Thanks for taking the time to come back and share your success. I appreciate your time and feedback, thank you again so much! I’m glad you had a safe build and hope you sleep well on your new frame. Talk to you soon.
You have no idea how much I love this bed design. It's beautiful! I would like you to make the measurements for a single bed, I would greatly appreciate it. You do an amazing job.
@bill Hey Mr. Bill, thanks for your enthusiastic compliments! I haven't designed a floating bed frame for a single bed, what country are you in? And what are the dimensions? Feel free to reach me on Instagram realc_love1 at any time if you have that platform and I'll be glad to help you or you can just simply reply here, whatever is good. I'll talk to you again soon my friend. Thanks for your time and support.
I will try to do it with Woodbex plans.
@Aleida Bianchi Hello Aleida, thanks so much for stopping by. I don't know if the dimensions for my floating bed frame and listed in there. If not, I'll be glad to offer any help that you may need. Safe building my friend!
@@CurtisMadeIt I knew you'd like it . Have a great day C-Love1
@Aleida Bianchi Thanks so much Aleida. I hope you have a great day too!! Come back and see me.
@@CurtisMadeIt Awesome to hear that ❤
@Aleida Bianchi Just now seeing this, sorry for the delay in my reply. I hope you are still doing well my friend.
Thank you for this excellent work, the engineer is skilled and the design is luxurious.
@Saed Zahr Thank you brother Saed. I really appreciate your awesome compliments, you are very nice. Please feel free to subscribe to my channel to be notified about videos that I will post in the future! Talk to you soon my friend.
Just built this for my guest bedroom and went step by step according to your instructions. I spent around $105 at a Virginia Home Depot and purchased x1 2x6x8, 2x6x10, 2x6x12, 2x6x14, and x4 2x6x10(along with a box of screws). Super happy with the result thanks for the instructions, going to be doing a king size tomorrow.
@William Powell Thanks a whole lot for taking the time to come back and let me and everyone know, I really appreciate it my friend. I’m glad your build went well and came out as expected. Have fun with the king size and your other future builds. Be careful and take care!
Just came across this just now I know this video is 2 years old. Lol. But I see you said you were making a king size. Could you give the measurements for all the plywood I will need for a king?
Ive been looking to do something simple for my daughter’s bed this is gonna help big time!!! 😊 Thank you
@Mommy Loyola So so cool Mom, I’m very glad to hear that! Let me know if you have any questions, I’ll be glad to help. Have a blessed day and a safe build!
I absolutely love that you included sizes and materials for all bed sizes. Thank you helped me alot with my decision on what type of bed I would like..
Brian Dunn This is terrific feedback Brian, thanks so much for your time and compliment. I appreciate your support brother.
@@CurtisMadeIt no problem.
Thank you for including a material list, I relied on this as well as your measurements chart, saved me a bunch of time of measuring and remembering haha
@Jeremy Krause You bet my friend, I’m glad I was able to help. No more broken toes because of a bed post in the middle of the night for you ever again…only a few more billion people to go. Haha 😂 I hope you had a safe build and you are happy with it. This was my first ever CZcams video so it definitely isn’t the best production…check out the king size build for a similar video with *much* better editing. I appreciate your time, thanks for stopping by.
Wish i could post a picture. This video made it very easy. Took me less then 2 hours. So cool! Thanks for the idea, and the help!
@William Michael Hey William, thanks a lot. I really appreciate your time and feedback! I’m glad to help whenever I can. Stay tuned for more great stuff on the way!
Built this bed frame today. Measurements were dead on with one exception. The center braces for the base should’ve been 18, 34, 50 once the ends were connected. Since we have a memory foam mattress without a box spring, I opted to use 2x8’s for my base, 2x6s for the mattress base with plywood for the 60x80 top to get the right height that fits me and my wife. This floating platform bed is rock solid! I’m a 6’2, 375lb football player and with the 2x8 base and 2x6 top, it does not tip at all when I sit on the very edge of the bed or the foot of the bed. Thanks for the excellent video!!!
Wrecking Crew Thank you for the feedback, this is Excellent! I’m glad your modifications worked and I appreciate the support!
Wrecking Crew about how much did you spend on wood
Keith Howell about $50 total in wood and screws. This frame is rock solid and I highly suggest.
I was also thinking 2x8 for base so i can get a little more height since im just using a memory foam mat without boxspring. My question is..by going with the 2 x 8 for base will you be able to see the base at all under the mattress or does it still give the illusion that the mattress is floating?
Ronald Romero Thanks for your comment Ronald. I would imagine a 2x8 base would give even more of the floating illusion, be every bit as sturdy and still have the base hidden. I’m sure you could do this and get the results you are expecting.
Pretty sweet bed man. Loving the channel! Keep it up.
Kotaliss Family Vids Thanks for looking and taking the time to leave a comment Fam, I appreciate your support. Stay tuned, I’ve got more on the way!
Best video I've seen so far, esp. done by yourself. Thanks for the video!
Bryon Pearson Thanks Bryon, I really appreciate the support. 🙏 Stay tuned, I’ve got more videos on the way soon.
Bryon Pearson I posted the head board modification, take a look if you would like. It’s DIY Floating Bed Frame Part 2 - The Headboard
Nice job and very thorough on the build and information. Keep up the good work
marcos macias This is great feedback, thank you so much Marcos!
Okay so I’m going with the 12in overhang but with a full sized bed wish me luck, also thank you for the video keep up the good work
Awesome, and so glad to hear it. Make sure and adjust your measurements to fit your bed size and let me know if I can help at all.
I built a queen size frame watching this great detailed video. Love it! Our family and guests are always very impressed when they hear that I built it in 5hrs lol. My question is, is there any way to convert this into a king size frame without having to build a new one from scratch?
@B2theKM Hey B, thanks a lot for your time and feedback, I can’t tell you how invaluable it is. I’m really glad this video was able to help and you are a real hero for sharing it with your friends and family, just make sure and send them to my channel or video please. There actually is a way to convert this in to a king size, believe it or not. I used my board stretcher and the lumber from the queen size to make the king. I am the only person I know that has a board stretcher as I inherited mine from a legendary carpenter. Without that tool, yes, you will need to build a new one. Not to fear though, I’ve got a video for that one too, annnnd, it’s a whole lot better production than this one. The price of lumber has come down quite a bit too so it shouldn’t break the bank. Thanks for your question, I hope this helps, and I’ll talk to you soon.
Moving to a new place and I will most definitely be using this idea. I just didnt want to buy one and kind of like it. But this here I love and I can make it thanks to your video!
Carlotta A I think you should Carlotta. It’s a super simple build with fantastic results! I appreciate your interest and hope you have a safe build. Let me know if you have any questions, I’ll be glad to help.
Carlotta A I posted the head board modification, take a look if you would like. It’s DIY Floating Bed Frame Part 2 - The Headboard
Now that was a Great Video, and looks just as easy to assemble as you built it. Awesome Video
@SAMMY Thanks a lot Sammy, I appreciate it a lot. I promise you it is very very easy and the outcome is pretty hard to believe once you see it yourself in person. Thanks for your compliments my friend.
this looks so professional😱 soo good
@cruz Ramirez Thanks so much my friend. I love that there are no bed posts to kick in the middle of the night! Thanks for stopping by and commenting! Talk to you soon.
I built this same bed frame thanks to this video! on my version I sanded and stained the frame
@RandomStuff HD Awesome my friend, I’m so glad to hear it. Thanks so much for sharing your success. I appreciate your support of my channel a whole lot!
Hi I am 55 and going to make this while my husband is at work 🤣 your instructions are so good that I believe I can thank you
Tinamarie Kizzar So cool Miss Tina. I appreciate the compliment. You are very ambitious! Be careful and let me know if I can help any more at all.
Tinamarie Kizzar I posted the head board modification, take a look if you would like. It’s DIY Floating Bed Frame Part 2 - The Headboard
Excellent video and parts list. Love the work. Please keep it up. I'm going to make this. This weekend. Thanks
Thanks for the support Michael. Let me know if you have any questions and I’ll help you out as best I can.
Michael Chandler I posted the head board modification, take a look if you would like. It’s DIY Floating Bed Frame Part 2 - The Headboard
So, just built this bed and it is amazing tho I made a few alterations to the design. I used 2x12's for the bed frame and 2x4's for the crosses and made it just a tad wider and longer so the box spring would set inside leaving the base frame alone and it worked perfectly! Just waiting on the lights to complete the aesthetic.
Aaron Neason Wow, this is GREAT feedback Aaron, thanks for taking the time to let me know, I really appreciate it a lot. I’m glad you achieved the look and function you were after and hopefully your build went safely. I appreciate your support my friend. Thank you 🙏
Can you post a picture of your build please
@Dalton TOFT Hey, good morning Dalton. Thanks for stopping by. I’m on Instagram realc_love1. Contact me there and I’ll send you all the pictures you need my friend. Talk to you again soon.
Sweet!! Looks very sturdy. Do you have to take it all the way apart when moving ?
Maurice Williams I’m not sure, I haven’t made it that far yet...and a very good question. I will have to think about how I will handle that. Thank you for your comment.
This video will never get old.
@waitdigital Hey Wait, thanks so much. I hope that’s a good thing. I appreciate you supporting this channel my friend 🤝
Thanks bro, I just saved 5000 bucks building my bed frame for an Alaskan king size mattress. Used your video
@Charles Baron This is really insane. I’ve literally got a pretty large smile on my face imagining what it must have felt like the moment you realized you were about to save that kind of money. Cheers to you my friend, thanks for sharing. This is super terrific!
I was looking for the perfect diy frame for a custom sized mattress that I have ordered 108x80 inches. The mattress is massive, and I think this idea is solid and perfect. Any insight on base measurements to ensure this project comes out perfect, would be greatly appreciated. I do intend to use 2x8's to kind of prevent the mattress from sliding off.
@Ebony Wilkerson Lane Hey Miss Ebony, thanks for your interest and comments. I’ll have to sit down and design a frame just for you. That is a *very massive* mattress, far larger than anyone else has requested. Can you leave me your email address here or (preferably) reach me on Instagram? I’m C_Love1984 and I’ll personally work with you to make it happen. Talk to you soon!
Just a genuine question, would the bed frame overtime eventually effect the shape of the mattress? Considering a regular bed frame has a brace underneath. I’m considering making this and putting in a bit of a brace at the top too maybe 🤔
@El Saucey Hey Saucey, thanks for your time and interest. Yes, this frame will absolutely (negatively) affect your mattress if you don’t have either a box spring or some plywood as a base. Put either one of those on there first after you build the frame and you will be good to go. *Hundreds* of people have built this frame in several different sizes, I’m certain of it. Let me know if you need any help, I’ll be right there. Talk to you soon my friend.
This was my first big build ever measurements were perfect great video
Boss Thanks so much Boss. Your feedback is priceless. Glad everything worked out well for you.
Boss I posted the head board modification, take a look if you would like. It’s DIY Floating Bed Frame Part 2 - The Headboard
Built this today for my son. Was easy to make. Looks great!
Roel Al So glad to hear it Al, thank you so much for your feedback!
Roel Al I posted the head board modification, take a look if you would like. It’s DIY Floating Bed Frame Part 2 - The Headboard
Yeah great weekend project. Spent nearly $200 in lumber because of a rookie mistake. Didn’t cut the large pieces first so I ended up needing two additional 2x6’s. Other than that I love it so far
@Bhris Irvine I know your pain Bhris, I’ve spent some extra money on this bed myself by the time I got done modifying it all the way. Measure twice, cut once...make sure you’ve got your plan in place before you jump in the water and start cutting. I’m glad you were able to get it done though. I’m so happy you *never, ever* have to worry about kicking the bed post in the middle of the night again though, that is absolutely a win. Enjoy it my friend.
Ok, I was skeptical of the measurement but it was dead on. Thank you a lot.
massai jarecki Thank you Maasai, I really appreciate your feedback and support.
What are the measurements?
Cortni Hedden Hey Cortni, what measurements are you looking for? Let me know and I’ll help out if I can.
C_Love1 all of the pieces of wood 😂
Jaylynne Ventura Haha 🤣...I suppose I should have been more specific. I was trying to see what size bed they wanted. I provided the measurements for the cuts for 3 of the beds in my description.
Looks great! It really is a good feeling to sleep on something you made!
@The Ruths Yes, indeed it does. I really like talking to people from all over the world too. This has turned out to be a very rewarding experience on many different levels! Thanks for stopping by!
Huge shout out to you man. Built this bed over the course of 2 weekends based off of your shared measurements. I used 2x8 for the base and 2x4 for the mattress support. I then ran 3 Douglas fir 4x4 posts along the head, core and foot of the mattress to further support the weight of memory foam mattress. Then added all kinds of cross supports off of the mains to where it looks like a checker board and added Simpson strong ties pretty much on every corner, 30 in total, then slapped sheet and a half of Masonite on top to evenly support the mattress. Then the leds lol. Filled all screw holes, sanded and am going to put a coat of flat black paint on it this week to clean it up. Thanks for your video and it's awesome, and presice measurements. I only altered the mattress frame to 79x59 and still used your base measurements. Thanks again
@Joshua Garcia Hey Joshua, wow, thanks so much for this very detailed comment of yours. It only took you two weekends to build this? Impressive...and who was this for?!! Seem like the governor or the president maybe. You put a lot in to your build. It sounds like you really could park a tank on there...or a couple. And 30 Simpson strong ties! My man...this bed frame is hurricane proof now. Instead of the flat black paint, you could just put a fitted queen size sheet over your assembly there and it should fit nicely with your modified 79x59 measurements...just a recommendation, I don't think the mayor will be too thrilled with that lack of effort right at the end though. 😂 Thank you for your feedback and your description, you are the real hero here. I'd sure love to see what this masterpiece looks like. Did you happen to take any pictures of your build? Talk to you soon Josh.
@@CurtisMadeIt I sure did man. I took a photo at every major step in the build. And I only thought about using the black paint as I already had a gallon. But yeah I may have went a little overboard on the structure for a 195lb guy but mattress is 14inches thick and I really want this to last a life time. Hate stubbing my toes lol. Could of got it done in a weekend maybe but work schedules and then working in the house around the babies nap schedules lol. All while not waking the babies. That would be bad lol Sorry for my long replies
@Joshua Garcia Well, I was gonna say let’s see it, but it looks like you already beat me to Instagram. I’ll move over there and take a look shortly. 👀 Good idea on the paint, way to be resourceful. I always try to use any scrap I can first. Oh yeah, it’s gonna last a lifetime, that is absolutely for sure. That’s the way it was built though, the way it was intended…just like mine. I *totally* understand the busy schedule and don’t mind your ‘long’ replies at all. It’s really humbling for me and is really a pretty big part of this CZcams experience for me. I never thought my channel was going to do this. It’s great to hear from you. Thanks for your time my brother.
@Malaina Seegers Did you get all the info you need to complete your build?
... thanxz for keeping it simple for us folks, much appreciated. Making a king single for me daughter. Cheers
november9err Glad to hear it November! Let me know if you need anything else, I’ve already designed a floating bed frame for a king size too. Reach me on Instagram if needed. I’m C_Love1984. Cheers my friend.
If some of you are going for the FINISHED WOOD look instead of covering with cloth.. Use wood ties (galvanized steel plates with holes) and shorter screws to attatch all the frame parts. Rout(or sand down) your edges, stain and finish.
TMP STUDIOZ LLC Oh yeah, this is a great idea TMP. Thanks a whole lot for your recommendations, hopefully someone can put them to use!
Thanks for posting this. I made the bed and it looks great. Wife approved 🙏
Doug Henline Glad to hear it Doug, thanks so much for your feedback my friend!
Doug Henline I posted the head board modification, take a look if you would like. It’s DIY Floating Bed Frame Part 2 - The Headboard
Nice work, dude! As soon as I finish the king size headboard, I’ll use your dimensions here for my daughters queen size mattress....pretty soon and thanks to you, all the bedrooms in the house will have floating beds! Lol 🤘🏼 good info here, keep kicking ass bro
@Matthew Nerlfi Hey Matthew, thanks for stopping by again. I appreciate your support, ambition, and enthusiasm. I'm absolutely beside myself that you are building floating bed frames for the whole house. I hope everyone turns out super happy and that all of your builds are safe. Please feel free to reach me on instagram reacl_love1 at any time and I'll be glad to help you with anything you may need. Take care Matthew, talk to you again down the road my friend.
Pretty Rad, wish I thought of that when I built ours. I just wonder how durable it will be, long term of course.
Adam This is among the top three best comments I’ve gotten to this point. ‘Rad’. You are the real man Adam. Thank you brother. It’s been there 6 months and seems to be solid as a rock still. No problems at all that I am aware of. I’ll be designing and building a headboard before too long. Video to come.
@@CurtisMadeIt is still good ?
@L J oh yeah, I’ll be here forever my friend.
I was literally just thinking to myself i should build my own new bed frame and CZcams recommended it to me .weird
NOE MARTINEZ Weird how that works isn’t it, Noe? It must be a sign. This is a super easy build and will give you fantastic results! Come back and let me know how easy it was. Thank you for your time and comment. 🙏
Law of attraction? Lol same here! Will start on it tomorrow. Good video
Xavier Flores Thanks so much for you time, comment, and compliment Xavier. You will be surprised at how easy it is. Cheers brother.
They're inside our heads man...they have so much data on us they know what we're gonna think before we do man...Trippey bro
Jon J Thanka for looking and leaving a comment Jon, I appreciate it.
Thank you for posting this!! I may have seen it late, but it turned out awesome!! I saw your video on the headboard, but I decided to work up my own design on ours!!
@Tom Wolfert Hey Tom, you aren't late at all my friend, in fact, you are right on time! People are still discovering this video every day and I'm glad you took the time to comment here. I hope your build came out exactly the way you wanted and you are very welcome for the reference. I appreciate your support, let's talk again down the road.
I would send pics, but it won't let me here. I used my router to make grooves in the 2x8's for slats for the mattress. Five 1x4's did the trick!!
@Tom Wolfert Hey Tom, I’d love to see it! Email me curtisalove1 at the five letter g-word or Instagram realc_love1. Take care my friend.
I made this in queen size today for my daughter. It turned out perfect thanks to your instructions. I appreciate you doing this. THANK YOU!
A. J. Paris Hey A.J.! So glad to hear it and I’m glad it worked out for everyone. I hope she loves it. Thanks so much for your feedback, I genuinely appreciate it a lot. Cheers brother.
I need the measurements for the king size bed
Chris Rhodes Just now seeing this, so sorry. I’m on Instagram C_Love1984 or leave me your email address here and I’ll send you everything you need.
A. J. Paris I posted the head board modification, take a look if you would like. It’s DIY Floating Bed Frame Part 2 - The Headboard
What are the dimensions measurements for the queen?
Where did you buy your led lights from. Specifically what is the brand you bought?? Thanks
@Brian Tellinghuisen Thanks for your question Brian. These are a newer and apparently much more awesome set of the same lights that I used:
www.amazon.com/gp/product/B08DD45XQR/ref=as_li_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B08DD45XQR&linkCode=as2&tag=clove1-20&linkId=f04b703e5174c25d7d741f120bd73ce1
The brand is Daybetter to answer your specific question. I hope this helps and thanks a lot for your interest!
@@CurtisMadeIt did you use 50ft or 25 ft
@Atm Dee I would go with the 50ft. It’s a much better value and will make your bed frame *glow*! Thanks for stopping by.
How would i figure out the dimension of the frame for a full size bed
@Mocha Just leave me your email address here or reach me on Instagram, I’m C_Love1984. I’ll beam over my hand drawing and step by step instructions. Talk to you soon.
Gonna have to bring you up from Texas to Oklahoma to help me out making this one. Does look pretty solid I’ll give it a shot
@Rosariobeast31 I wish you would, I’ll be up there in just a moment. We’ll build two of them to prove it...and still be done by noon. Take a look at ‘part 2 - the head board’ and ‘floating bed frame 3.0’ if you would like. Let me know if you have any questions, I’ll be glad to help. Thanks for stopping by.
Super cool. Most likely be building one like this myself
Travis Cole Thanks for looking and taking the time to leave me a comment Travis, I appreciate it. I hope my tutorial helps and let me know if you have any questions please.
Exactly how my bed looks
Steve breezy Thanks for looking and the comment Steve. I love it so much!
Steve Breezy I posted the head board modification, take a look if you would like. It’s DIY Floating Bed Frame Part 2 - The Headboard
I think Vin Diesel is doing the voice over
rstezza Several people have told me IRL that our voices are very similarly sounding. I appreciate you taking a look and leaving me a comment and compliment. Thank you.
Amen brother, did it at home turned out great..
@Jaren Hitchcock Thanks so much for letting me know Jaren, I really appreciate your time and support my friend. Be careful building out there. Talk to you soon.
Youre an awesome person. Thank you, ill be doing one of these for myself next week.
Julia Julia Thank you so much! I’m so happy to hear this, I hope yours turns out well! Let me know if you need any help.
@@CurtisMadeIt aww thank you. No, seriously. I always have questions at the end of a diy videos or i have to rewatch it a dozen times, but your video and bed frame design are so clear, it only amplifies the inspiration and motivation. Thanks a lot.
Julia Julia So wonderful. Your comments are motivation for me. Thank you so much! 🙏
Julia Julia I posted the head board modification, take a look if you would like. It’s DIY Floating Bed Frame Part 2 - The Headboard
Imagine doing shrooms on this bed.
A.M.R. • Don’t do it A, it would be sensory overload for sure!
If I had a floating bed like that girls be calling me Aladdin with all types magic happening. 😂
Angel S. Haha, thanks for looking and leaving a comment Angel. This is a real simple build. You can easily have one of these too!
@@CurtisMadeIt I will definitely try and build this. Thx for sharing this with us.
Angel S. Anytime, I’m glad to help. Let me know if you have any questions and I’ll reply as quickly as possible.
Made this bed but with 2x10's on the outside and 2x6's everywhere else. We laid about 10 1x3's across the base, and just put the mattress straight into the recessed bed frame. The bed won't slip off if bumped and won't fall through the frame. Thanks for your idea!
@C W Hey C, thanks for stopping by and sharing your successful modification and build, this is super cool! I hope everything worked out well for you and I'm glad my video was able to inspire and assist you. I can't thank you enough for your support my friend. I look forward to talking with you again down the road. Take care.
@@CurtisMadeIt kinda funny, my gf ended up buying a pair of the shoes you wear in your full size bed video. People lost their minds about them at a festival haha
@C W True story...I bought those before I ever even had a thought of YouTubing and wearing those in the floating bed frame videos was kinda of a last moment thought, but it has tremendously worked out. Those things are a mega hit and I still love them every bit as much as the day I bought them. I hope she gets as much enjoyment out of hers as I do mine. Talk to you again soon.
I can’t wait to try this… 2 years ago I lost my Moma to COVID-19 and Dementia. I moved her home with me the last 3 years of her life. To do this I completely gave up my bedroom, I cannot bring myself to sleep in my old bed. I miss her so much, I’m hoping this new look will help me get back into my bedroom. Guess we will see!! Thank you!
@Tammy Peagler Hi Miss Tammy. This is so, so heartbreaking. I'm so sorry for the loss of your mother. I can't even imagine what that was like to have to experience. I hope you are bouncing back well and I'm glad that you've found my channel to help you renew your bedroom! Please feel free to reach me at any time on Instagram realc_love1 and I'll be glad to help you in any way that I can. I hope that you have a safe build and enjoy your new floating bed frame. Talk to you again soon Miss Tammy.
Carpenter: How can I help you today sir?
This guy: I want to burn to death in my sleep.
Carpenter: Say no more.
Talavera jr Thanka for looking and leaving a comment Talavera. I don’t actually sleep with them on to be honest, I just have them on while I’m awake.
Talavera jr I posted the head board modification, take a look if you would like. It’s DIY Floating Bed Frame Part 2 - The Headboard. Just added some tinder...and kindling. 😂
You did a nice job my brother, I was wondering if you thought about going with wider wood so the bed would sit higher so you didnt have to use a box mattress . Im 6"5 and I need my bed frame 2 feet off the floor without the mattress...just a thought
Royal Wilson Thanks a lot for your time and compliment Royal, I really appreciate it. I can accommodate this. Using 2x8’s instead of 2x6’s would give you an additional 4” height, would put the deck at 15”. No box spring would add another at least 3/8” for the plywood. There are quite a lot of comments on this video now, but user ‘wrecking crew’ is also apparently a very substantial man and he modified this build in a similar fashion to what I just recommended and said it works great! He is 6’2, 375, a real American. Thank you for sharing your thoughts with me.
Thanks for the assist. Made this frame today!
@FFS! You bet, I'm glad to help. Glad everything came together for you. Thanks for coming back and taking the time to leave me a comment. I appreciate your support my friend. Talk to you again down the road.
Amazing outcome and only cost me $85 !! If you do want to eliminate the box spring I recommend using 2x10x8 for the base so it sits higher with just a mattress! Love it
Joshua Persaud Thanks for the feedback and good recommendation. I appreciate you my friend. Glad yours came out well!
Joshua Persaud I posted the head board modification, take a look if you would like. It’s DIY Floating Bed Frame Part 2 - The Headboard
Thank you for making it simple. 👍🏾
@Chad McLeod Hey Chad, you bet my friend. Thanks for stopping by and leaving me a comment. I appreciate it.
Watched all your videos and love the explanation and details you provide. Truly appreciate it.
If I wanted the bed to sit within the frame, instead of flush with the frame, would I just add two inches to all the board lengths stated?
@tRRuble Thanks my friend, I greatly appreciate the support and kind words. Make it 3”. 2x6/2x8 actually measure 1.5” wide. Make your side boards 3” longer too. Should be the same with the head and foot boards as well. Awesome question, thanks for your time.
Short and to the point I like it. Got a new subscription
Big Burn Thank you for your time and comment Burn, I appreciate it a lot. I’ve got more on the way!
Big Burn I posted the head board modification, take a look if you would like. It’s DIY Floating Bed Frame Part 2 - The Headboard. I considered your comment quite a lot while editing this video almost a year later (from when I posted the first video, about 6 months after your comment here.). What do you think of this new video edit? Let me know on there if you would please, I would greatly appreciate it.
C_Love1 I’ll check it out after work appreciate it!
❤ thank you for sharing I'm going to build it myself now!! Thanks ❤ ✌
@mary marmande Hey Mary, so cool. I’m glad to hear this! I hope my video helped and if you have any questions, I’ll be glad to answer anything I can. Thanks for stopping by!
We just completed a King size frame. It came out amazing and sturdy! Thanks for the inspiration.
K CK Glourious K, thanks a whole lot for coming back to let me know. I appreciate your time and feedback immensely. Cheers friends!
For your king size build did you make the base the same as the queen size build just changed up your platform size?
Skylar McWee Hey Skylar, thanks for your question. I would not recommend doing that. I would recommend the base be 52x68 instead of 36x68.
@@skylarmcwee2356 We made it the same as the queen size, just redid the math.
@@CurtisMadeIt we made it just like you did im pretty sure. Maybe I misunderstood the question. It was 52 x 68.
Just built one with these videos and his measurements you can’t go wrong
@Earnie Skates Hey Earnie, thanks so much for this. I very much appreciate your time and support. Bless you my friend 🙏
Love the video. I’m in the uk and I’m going to try this but in Uk double size. I am going to adjust measurements to maintain 12inch overhang. My question is what are you using for mattress base as no slats? Can I just use a sheet of ply?
@flipzy403 Hey Flip, thanks for stopping by and I apologize for the delay in my reply, I've been working on a very time consuming and sensitive project, but I got it done! Double size, got it. If you are going to use a sheet of ply, I would drill several 1" holes in it to allow the mattress to breathe. Others have used cedar fence pickets but I always stick with recommending a box spring. I hope this helps. Thanks for supporting this channel my friend 🤝 I hope you have a safe build.
My boi got that money making mindset 💯💪🏾
Brandon Griggs This is 2020 (now). We need multiple side hustles.
C_Love1 yesssssirrrrr💯
This was an AMAZING video.Thank You.
@Artie Kramer Hey Artie, thanks so much! I really appreciate you stopping by. This was my first ever CZcams video and I think my video editing has gotten a little better. Check out my king size version of this build and its a whole lot better. Talk to you soon.
I feel I got the tools to finally do this definitely my next project
@09Films So cool my friend, thanks for sharing. Be careful.
I freaking love it! I looked for this in this stores their out there but out of stock so cool
@vania toledo Thanks so much Vania, I appreciate it a lot! Build yourself one, save some money. Let me know if you need any help. I appreciate your compliment and enthusiasm. Talk to you soon my friend.
@josiahtubo did you get all the info you needed?
Good job, you're a great teacher👍
deetay cool Thank you Dee 🙏. I’m trying really hard to get better. I’ve got more content on the way so stay tuned!
deetay cool I posted the head board modification, take a look if you would like. It’s DIY Floating Bed Frame Part 2 - The Headboard
Looks badass man. I'm gonna build one. Thanks for the info...
ChiefofTradez You bet, thanks for looking.
ChiefofTradez I posted the head board modification, take a look if you would like. It’s DIY Floating Bed Frame Part 2 - The Headboard
Very cool. Great work man!
Ali Hassan A lot of people seem to think so. I had no way of even possibly imagining this bed frame would be this popular. Thanks for the compliment brother.
Thank you for including the measurements and description 😭🤝
VAAYCHILL Hello Vaaychill, you are welcome, and thank you for looking and your comment. I’m glad to help. Let me know if you have any questions.
VAAYCHILL I posted the head board modification, take a look if you would like. It’s DIY Floating Bed Frame Part 2 - The Headboard
Great stuff C_love, just curious…we will not have a box spring to handle the spacing on the joists. I’m guessing I’ll need to lay down plywood on the frame to support the memory foam mattress or use slats and make them closer together.
Thoughts?
Thanks again for a cool bed design
@William Tell Hey, good morning William, thanks so much. You are correct sir, plywood on the deck of the frame will be just fine. You only need 15/32" or the 1/2"...nothing fancy or expensive at all. I hope this helps. I really appreciate your time and support my brother. I'll talk to you again down the road.
You just got yourself a new subscriber!!!
@Jack em up garage You just got yourself a new friend! Thanks for your support Jack, I'll talk to you again down the road.
That bedpost 🤬🤬🤬🤬..........fantastic job 👍👍👍👍🏴🤪
@J R Thank you so much my friend, I appreciate it a lot. I hate those bed posts too!
Excelent! best DIY video ever!
@rulo4utube Thanks so much rulo, I appreciate your compliment and support.
I’m looking to make a frame for a twin XL bed for our extra room and this looks perfect as grandkids will sleep there too. Any tips on changing the size? The mattress is 39” x 80”.
Di G Thanks for reaching out G, I’ll be glad to help. Leave me your email address here or reach me on Instagram(I’m C_Love1984) and I’ll beam my hand drawing right over. Talk to you soon.