EV350 FIRST FLIGHT TUTORIAL - PART I - GENERAL FLIGHT PROCESS

Sdílet
Vložit
  • čas přidán 30. 08. 2022
  • This is a brief tutorial for the first flight of Mugin EV350: www.muginuav.com/product/mugi...
    From the aircraft setup, pre-flight check, Mission Planner setting, motor/ESC calibration and Waypoints Setting, we are trying to make everything clear to the new users.
    More videos on the detailed settings coming soon.

Komentáře • 11

  • @serhatalc4915
    @serhatalc4915 Před 7 měsíci

    This is an excellent plane. I flew for 2 hours at an altitude of 2600 ft in 30 knots of wind. I didn't think you were this talented. The only problem I had was the thermal air pressure caused the plane to reach 6500 ft. Congratulations, good work.

  • @romannefedov2913
    @romannefedov2913 Před měsícem

    hello, good flight!
    for a 7 min flight drone use less then 5% off battery. Can a 350 fly by terrain following and auto planning адшпре for a orthophotography mission?

  • @seanyfpv
    @seanyfpv Před rokem

    this is so cool! how were the booms made?

  • @GLCxGLA
    @GLCxGLA Před rokem +2

    I already researched the maximum range these drones can fly, the mugin-6 looks promising, but...
    I have a question regarding the Range of the radio signal, and how to deal with limited range of the radio controller, or what other devices are used to get the full 300~km range

    • @user-tk4xe6vi2q
      @user-tk4xe6vi2q Před měsícem

      那就需要通讯距离更远的链路来实现

  • @bmsfx
    @bmsfx Před 3 měsíci

    But i have to wonder, your adding 4 more motors, more weight also from ESC, its more heavy on a vtol take off then a streight, what is the advantages in this beside a easy landing?

    • @user-tk4xe6vi2q
      @user-tk4xe6vi2q Před měsícem

      最大的优势就是起飞和降落不受场地限制 这目前是最佳的方案

  • @yamashe8480
    @yamashe8480 Před 2 měsíci

    How do you keep the takeoff propellors aligned with the frame during the cruise?

    • @user-tk4xe6vi2q
      @user-tk4xe6vi2q Před měsícem +1

      定桨电机 停止转动的时候保持一个方向

  • @user-tk4xe6vi2q
    @user-tk4xe6vi2q Před měsícem

    点赞