How to Set the Iginiton Timing on a Volvo Penta 4.3L GL Mari
Vložit
- čas přidán 7. 09. 2024
- Step by step how to instructions detailing how to set the base ignition timing on a Volvo Penta 4.3L GL Marine Engine equipped with the Delco distributor and ignition system.
Marine Engine Specifications
www.perfprotec...
Nice video, straight forward. Thank you.
Do you have a part number for the jumper “timing tool” you used?
This video is incomplete...what about for total advance timing..do you remove that plug?
unfortunately most people dont check that or understand it.. if you want to check total timming you need a timing light with advance function you wil be able to see actuall timming at idle and any rpm. so this instruction is for basic timming with shitty timming light.
Hello.I have 4.3 gl volvo penta vortec,and have 95 octan fuel.How many degrees must adjustmen.Thank youi
Did you ever find out the answer I'm trying to figure out the same question
What happens if you plug up jumper befor motor is stsrted. Some people say befor some say after. Any info
burn out the ignition module
Hello, i have a Volvo penta 4.3 GS. Do i need this tool? Can I directly set the timing advance directly following the chart in the manuale? 600 rmp -18°, 1000rpm - 21°. Using a normal strobo light. I set 10° on the light. motor at 1000rpm and I will see 0° on the damper marks.
How do I time a 1999 Volvo penta 305 when there is no timing mark on the balancer?
What is the factory timing setting for a 1996 Volvo 4.3 GS with stamped steel oil pan, short reach plugs (Champion RV15YC4) and running 89AKI octane? Is it 0 degrees TDC or 6 degrees BTDC??
10 degrees is the perfect number.
Where do I get that timing adapter?