Unglaublich was heutzutage alles möglich ist mit so einem Drucker. Wirklich der Wahnsinn dieses Projekt. Sieht richtig gut aus. Ich will auch so einen 😬
That's a great model you did. I've ordered a few bits and I'm trying to get a 8x8 MaZ 537 with WPL and JJRC transmission. By the way, your engine sound works great, thanks for sharing
Love the build truck is beautiful. I'm on the process of printing all the parts for the trailer and back of the truck. I'm building a similar truck with a b16 cab and your parts . Thanks for the awesome parts on thingiverse
@@TheDIYGuy999 Not really as they were used for all sorts of platforms, from tractor trucks to mobile workshops, radio relay stations. The maximum it can pull with semi trailer is C-75 and C-200 as the latter air defence systems were on mobile chasis. Great work with the ZIL, it's a cracking good machine in reality with a great thirst for petrol :-))) The JJRC Q60 has mixed features between ZiL 151 and 157. I learned to drive on those and after a practice session you dont need a gym, the damn thing didnt have power steering but 131 does. Greetings.
You're welcome. but i have cognitive issues and dont think I'd be very well w/ a printer, I have power tools I dont even use yet even though i bought them because of this, i kinda wish I'd not buy them. I have a couple R/Cs I rather not have cause of it. wasn't always like this but a messed up surgery and years later I am getting worse.
Thanks. No, it would collide with the cab floor and with the spare wheel mechanism. The 180 size WPL motor is strong enough in my opinion, especially in combination with the motorised trailer.
Thanks. I have a Creality cr-8. The filamdnt is PLA for most parts and PETG for critical parts like the z shaped trailer frame pieces and the spare wheel mechanism.
Yes, as long as you use the same motor and gearbox. I'm using WPL gearboxes with 180 size WPL motors. The gear ratio of the WPL axle is 1:2.3 and 1:2.5 for the JJRC axle, so close enough. It also works well around corners, because the motor rpm is able to drop a bit under load.
@@TheDIYGuy999 okay 🖒 aber mach weiter so. Durch die Videos habe ich ich mich doch entscheiden mir ein wpl zu hollen und den auch ähnlich wie der von dir um zu bauen.👌🖒💪
@@TheDIYGuy999 ja das werde ich. Ich finde es einfach individueller wenn man sich die teile selber anfertigt und mann kann sich selber teile ausdenken. Ps... modelbau 😂👌 und noch viel Spaß mit dein 10×10 🖒💪
Unglaublich was heutzutage alles möglich ist mit so einem Drucker. Wirklich der Wahnsinn dieses Projekt. Sieht richtig gut aus. Ich will auch so einen 😬
Danke fürs Lob
Nice Job, Thumbs up
Thanks
Beautiful work
Thanks
excellent project
Thank you
Im back to watching again
Great videos and everything is free to download and print
Thanks. I hope I will see a lot of them soon on CZcams.
@@TheDIYGuy999 i think it will be soon
Amazing
Thanks
This is a very nice fabrication. Thanks for the 3D printer links too.
Thanks and you're welcome
That's a great model you did. I've ordered a few bits and I'm trying to get a 8x8 MaZ 537 with WPL and JJRC transmission. By the way, your engine sound works great, thanks for sharing
Sweet Tamiya kit!! I was looking into the same one!
Love the build truck is beautiful. I'm on the process of printing all the parts for the trailer and back of the truck. I'm building a similar truck with a b16 cab and your parts . Thanks for the awesome parts on thingiverse
Thanks for the praise and good luck with your build
Great work. Wonderful rig. Impressive work. 👍👍
Thank you
You should make a giant missile for the trailer 👍
Yes, that's what these things were designed for - transporting missiles. There are also mobile field bakery trailers.
@@TheDIYGuy999 Not really as they were used for all sorts of platforms, from tractor trucks to mobile workshops, radio relay stations. The maximum it can pull with semi trailer is C-75 and C-200 as the latter air defence systems were on mobile chasis. Great work with the ZIL, it's a cracking good machine in reality with a great thirst for petrol :-))) The JJRC Q60 has mixed features between ZiL 151 and 157. I learned to drive on those and after a practice session you dont need a gym, the damn thing didnt have power steering but 131 does. Greetings.
Good idea. C-75 will look great on it
This is just amazing, This truck gets more and more awesome. I wish I had a printer or knew someone close, I would love a couple fifth-wheels.
Thanks for the praise. You should buy a printer, they are not expensive anymore.
You're welcome. but i have cognitive issues and dont think I'd be very well w/ a printer, I have power tools I dont even use yet even though i bought them because of this, i kinda wish I'd not buy them. I have a couple R/Cs I rather not have cause of it. wasn't always like this but a messed up surgery and years later I am getting worse.
Sorry to hear that. I wish you all the best
thx
Yea. Like the other guy said. A missle on the trailer would really scale
Great videos!! Is this a wpl b16 with a different body?
That is so freaking amazing! I've never seen such a cool-looking WPL! 😍😍 By the way - do you speak German?
Ja, spreche deutsch, komme aus der 🇨🇭. Vielen Dank für das Lob.
@@TheDIYGuy999 Ach prima, dann kann ich ja ab jetzt auf Deutsch kommentieren :D
Why did you use metal GEAR in the truck AS TALE END.
What sound module are you useing?
incredible, thanks for sharing your effort. the engine 370 if it could be installed normally?
Thanks. No, it would collide with the cab floor and with the spare wheel mechanism. The 180 size WPL motor is strong enough in my opinion, especially in combination with the motorised trailer.
Really nice looking and i will make one for myself and which printer and filament u using
Thanks. I have a Creality cr-8. The filamdnt is PLA for most parts and PETG for critical parts like the z shaped trailer frame pieces and the spare wheel mechanism.
good one bro
Thanks, man
Did you sell at the printed item..
You can order them on Thingiverse
Does the rpm of wheels on the truck is the same on the trailer?
Yes, as long as you use the same motor and gearbox. I'm using WPL gearboxes with 180 size WPL motors. The gear ratio of the WPL axle is 1:2.3 and 1:2.5 for the JJRC axle, so close enough. It also works well around corners, because the motor rpm is able to drop a bit under load.
@@TheDIYGuy999 oh thats good. Im just wondering coz if it not it will cause of dragging.
I also was a bit concerned first. But it works just fine.
What is the Music at 1:26
Make UAZ please! !!!
Which one?
UAZ 469 make in 3 printer
Warum nicht auf deutsch. Ich weiß das du deutsch bist wegen deiner ausspreche und wegen dem feinspachtel 😂
Weil ich sehr viele Abonnenten habe, die nicht deutsch sprechen. Du hast übrigens fast recht, komme aus der Schweiz
@@TheDIYGuy999 okay 🖒 aber mach weiter so. Durch die Videos habe ich ich mich doch entscheiden mir ein wpl zu hollen und den auch ähnlich wie der von dir um zu bauen.👌🖒💪
@@youtubeedit6154 Dann viel Spass mit dem Umbau. Wirst du auch 3D gedruckte Teile verwenden?
@@TheDIYGuy999 ja das werde ich. Ich finde es einfach individueller wenn man sich die teile selber anfertigt und mann kann sich selber teile ausdenken. Ps... modelbau 😂👌 und noch viel Spaß mit dein 10×10 🖒💪
No talk English please germans are not the only people on earth we want to know what you say as well