Restoration $8500 Rolex Submariner Luxury Watch - Polishing Case Bracelet - Dirty - ASMR
Vložit
- čas přidán 20. 04. 2024
- In this video I make a restoration of a $8500 Rolex submariner watch from 2004 with cal 3135. The watch was listed in an auction as defective, serious issues.
Instagram:
/ watcheyesone
The watch interested me because it looked untouched from the outside and inside so I gave it a shot and bidded on the watch, just one more made a bid…Did I buy a scrap watch or?...
During the restoration the watch movement is restored and the casing is lapped, brushed and polished manually. All gaskets are changed. Pallet fork, escapement wheel, rotor axle needed to be changed. Off camera the automatic module with rotor wasn’t correct after rotor axle change, I needed to change 2 jewels in the automatic module and change one of the jewels height.
After the restoration the watch ran around + 5 seconds per day in real life testing. So I adjusted it a few seconds lower (shown in the video) so now it will probably be around 0 seconds per day, just maybe +1-2 seconds. The watch performance is according to Rolex service specification after 24 h testing.
During the restoration I use my home built DIY KiwiCleaner which is a watch cleaner, please check out the KiwiCleaner, this machine is awesome and just for maybe around 15% of a new Elma cleaner machine (and it's better than the Elma one!).
Link: www.diywatchcleaner.com
My gear and other products, affiliate links*:
Tamron 28-75 f2.8 sony e (Not G2)*: amzn.to/3xEVvRj
Sigma 70mm f/2.8 dg macro sony e*: amzn.to/3O5xgCM
Timegrapher*: amzn.to/3xE2oT4
If you like this video, I'll be very happy if you push the Like button (maybe put a comment?), more videos will come! Take care and thank you for your time!
This is not a tutorial video, I’m just a hobbyist and might do things incorrectly.
-----------
My channel :
/ @watcheyes
-----------
Music intro and outro:
"Scott Buckley - Snowfall" is under a Creative Commons license Attribution 3.0 Unported (CC BY 3.0) creativecommons.org/licenses/...
Music promoted by BreakingCopyright: • 'Snowfall' by Scott Buckley 🇦🇺 | Pian...
@ScottBuckley
Music mid:
Asher Fulero - Swans In Flight (Official Video)
@AsherFulero
*LINKS USED IN THE DESCRIPTION MAY OR MAY NOT BE AFFILIATE LINKS
As an Amazon Associate, I earn from qualifying purchases.By using the affiliate links I earn a small fee of your purchase with no extra cost. This will support my channel so I can increase the quality of my videos. Thank you for the support! - Věda a technologie
Just did my dream restoration project and I hope you like it!
The Rolex submariner was a joy to work on but the previous owner has never serviced the watch (that's my guess). So I found plenty of problems… One main big concern was that the rotor axle had scraped off metal all over the movement bridges, this can lead to a total scrap watch. I was lucky I guess that the watch “only” needed new parts for around 500 USdollar.
After the restoration the watch works very well. I tested it in real life (IRL) during the creation of the video and it ran around +5 seconds per day (Rolex specification says it should run during testing/as in real life between -1 to +5 s per day). So I needed to adjust it a bit as seen in the video. Now it runs for about +1-2 seconds per day.
Hope you will like my video, many thanks to all of you!
Wonderful. great work and excellent result!
@@Lightning77305 happy that you liked it, have a great day!
@@Watcheyes Thank you, keep up the great work!
Really nice work! Are you based in Sweden?
I can do that.....I just don't want to....
it blows my mind that the whole premium feel with the clicking of the bezel comes down to a fucking paper clip
Hahah, thanks for commenting, yes its quite easy 😄
We are living in 2024 and some things must be regarded as a joke especially something like a watch bezel sound that can be done by a 15year old boy with a paper clip. Average consumers are so dumb they go wild about the sound & feel of the watch bezels.
This is an absolutely stunning restoration.
fantastic work, huge respect for you.
Hi there Robert, thank you for taking your time commenting on my video, glad you like my work 😀 😊. Best wishes from Sweden.
Not only a great restoration but what a video - the footage, editing, takes, angles, etc. Thanks so much for this, it has made my day! Greeting from down under! Keep up the great work, Cheers mate!
Many thanks, I appreciate your comment alot 😊 🙂 Have a great day, greetings from Sweden.
Can you do some work on my readeel quartz..I paid $15 off temu 3 weeks ago but it's running +17 seconds per day... what's your address. I'll send it to you to fix and I$10...deal.??
Just mesmerizing to watch. Nicely executed. Keep up the good work, brother!
Will do and many thanks for the support! Best wishes from Sweden
Subscribed. It feels like you gave this watch a new life
Incredible work. You are so skilled. Love that you have all the tools needed. Excellent film and no need to talk. Perfect result, and a Rolex watch to be proud of. ❤
Thanks again Hans and nice to see you commenting to my videos as always 🙂
Mesmerizing from start to finish, wow what a transformation, you have incredible skills.
Fantastic. Loved every moment.
Super renovation, super work, legendary watch and 3135 movement the best from Rolex
And marvelous video🤩👍🏻😁
Absolute Jedi skills sir. The force is strong with this one. BEAUTIFUL work. A pleasure to watch. Masterful.
Amazing! As an Engineer and Auto/Moto enthusiast (and Rolex 14060M owner!), that is the finest work I've ever seen! Thank you so much for posting this!
This is fantastic repair work!!
Incredible work
Awesome video. Can't wait to get into this hobby myself.
Hello Mikearrowjoe, many thanks for your comment, do it :) Please tell how things are going ahead.
This was amazing and thanks for fixing the audio!
Wow you noticed, many thanks for commenting! You have very good ears :). I changed my microphone and the whole setup how to mix audio.
Great restoration.
That was kind, thanks for watching my video, have a great day!
Very satisfying
Worth the wait, what a beautiful restoration!
Glad you like it, easier project is already on the bench :)
One of best services i have seen 👍😊😊
Wow :O thank you
Incredible work, fascinating to see, congratulations on your very high level of expertise...
fantastic job and fantastic video!
Glad you liked it Daniele and many thanks for the comment!
Seeing you use the Kiwi cleaner brought a smile to my face i recently built my own they are fantastic and Frank the designer is a really nice bloke excellent work on this restoration my friend well done
Awesome video!!!
Great job!
Awesome restoration... hoping for a Rolex myself one day
Many thanks, You'll have one in very near future 😀
Great content! Thank you so much. I really like your style. Keep up the great work.
Many thanks! 😀
Excellent! Thank you.
Great video and image quality. 👍
Super renovation, super work, legendary watch and 3135 movement the best from Rolex😊
Many thanks and thank you for commenting :) Indeed very good to work on.
Is that movment better than my seiko 5 7s26..? +/-8 seconds daily...pretty good aye....$36 off an Indian auction site... cracked glass.. ..sneaky Indians
..but still not bad aye..$36.😊😊😊
Well done, sir !
Awesome skills, thank you for sharing with us.
Many thanks for taking your time watching my video, glad you liked it! :)
Love your videos. Keep up the good work man
Many many thanks, have great day!
Dando nueva vida a un clásico. Gran labor Artesano!!!. Saludos desde Uruguay.
Many thanks from Sweden 😀
Greats!!!!!!!! Wow!!!! Amazing! Thank you!!!
I have the same watch! Mine is running and keeping decent time. One day I’ll attempt a cleaning and service! I hope!
well done, enjoyed watching it.
Thank you 😊
Nice video. A couple of observations. Rolex ceased adding lug holes beginning in 2003 so without knowing the serial, at most this watch is 20 years old. Compared to a ETA 2824-2, I also tend to see wear on the rotor and sometimes the pallet jewel of a 3135 so when you factor in the price between a 3135 and a 2824-2, after years of service, I find this a bit perplexing. Premature rotor post/jewel wear has seemed to be an issue with Rolex/Aegler all the way back to the older 15xx movments as noted by rhodium plating wear with the rotor making the contact with the baseplate due to wear. I'm actually a vintage and neo vintage Rolex lover but must say it would appear that while not prettier, the ETA is a bit more durable in some regards but this is hard to gauge in a small sample study. It would almost indicate the ETA is a more robust workhorse movement than the 3135. Also, nice work in duplicating the top lug brushed surface. These are done by machine at the factory and are ofter hard to replicate by hand. One additional note to all new watchmakers is always let the movement run for 24 hours after a service to allow the oils to spread and settle in before checking and attempting any timming calibration.
It's from 2004 the watch. Thank you for the info. Yes, 24 h then adjustment but would test the watch irl after 24 h and then adjust after a couple of days to be within rolex spec of -1 to +5.
Great jobs.
Thank for sharing this video ! This one is very interesting, Rolex movement seems like straightforward, with a huge quality of parts. Hope can restore one somewhere in the future. Your images on video are with a very nice quality !✨👌
Best regards !!
Thank you to for commenting :) Glad you liked my video. They are, solid, straight forward, no tricky parts and springs.
Soon you will :)
Many thanks again! Best regards from Sweden.
Hate to be pretty much the only critic in the comments but is it just my eyes or did the new brushing on the case front turn out looking more like scratches than uniform brushing
I agree. Your comment got buried😂
Yes. It was way too course in my opinion. Everything else looked great though.
Good eyes :), still I think it's the same grit or close one, I tested finer on an object and that was to fine. So I think this got the best match.
To clarify, my observation was that the texture was less uniform and fine brushing and more closely resembling non uniform and too coarse. It may be just the lighting or like I mentioned... could just be my eyes. Still a great resto
beautiful
Just did my dream restoration project and I hope you like it!
Haha many thanks 😀
Всё как всегда аутентично 🔥👍 классная, хорошая работа
Рад, что вам нравится моя работа, и спасибо за комментарий :)
Triple “A” - Amazing & Awesome Always!
Ohhh wow thank you 😊
Very good 👌
Would have loved to see it on the wrist! Either way Bravo!
Yok böyle bir şey 'ya mükemmel ustalık 'ya hayran kaldım
Magnificent ❤
Гениально, отремонтировал рабочие часы😂😂😂😂
This was really good to watch but soon I feel asleep 😊😅
Questa è arte 👏🏻👏🏻👏🏻👏🏻
Any chance you could make a video of how to re polish a watch? I see the use of lapping films and other abrasives and would love to know your thought process behind it
Good good job.
Many thanks!
素晴らしい時計職人です。
Stunning restoration! I am wondering if you can share a link to the horotec movement pad you use 😊? Many thanks in advance!
Many thanks :) This is it's ID: MSA09.305
Snygg vågat att ge dig på en Rolex! Det har jag som hobbyurmakare aldrig vågat mig på än. 👍😀
Tackar Tveksam, skoj att se sig dig här igen (om jag minns korrekt :)). Snart så är du där, ingen "tvekan" 😉.
O seu trabalho é fantástico e admirável. Sou mecânico de ônibus e caminhões e fico assistindo o vídeo com uma certa agonia com a delicadeza e as pequenas peças desmontadas, limpas e lubrificadas. 😂😂😂🇧🇷🇧🇷🇧🇷
Many thanks, glad you liked it. I appreciate the comment a lot 😀
Imponerande jobb!
Beautiful work. Are the gears for the automatic movement bakelite? They look plastic. I am surprised to see that in a watch of this vintage but I have no idea what they would have used instead. Steel? Would be heavier. I think aluminum would be too soft and not as robust. They look in pretty good condition after all these years.
I guess I wasn’t paying attention. Did you replace the escape wheel and pallet fork , or did you repair the scratched jewel?
Extraordinário
Always wondered where/how you find the manuals to do this sort of maintenance?
Amazing work. If I tried to do that we might as well plan a funeral service for the poor watch.
Haha good one, many thanks for your comment:)
I like your Cleaning Machine 😉👍🏻👍🏻
Great :D
Excelente trabalho de paciência e precisão numa restauração. Parabéns.
Seria possível disponibilizar legendas em outros idiomas?
Hi Ulisees, many thanks for your comment, happy that you like my work! I don't know, I can look it up next time! See you later.
Wow 👏
Из этих деталей можно было бы собрать несколько пар часов (watch )😂
Hahah, I wish :) Thank you for commenting
Amazing job. Relaxing to watch as you fix the watch. Love it.
Quick question. You showed at the end that it was operating at +14 secs on the machine, and then you said you fixed it to +1-2. Why didn't you show that on the machine? Curious, because that would've been the money shot demonstration and you, more than likely, know that.
Many thanks for your comment and good question! The machine still says dial up around 9-10 s/d and crown down is at about 2-3 s/d. When wearing the watch for a normal day it shows to be at around +1-2 s/d. So the machine doesnt show how it really is. Rolex specification says directly after service it can be max +15 s/d. Then after adjustment and testing (runing in a test machine) it should be -1 to +5 s/d. Maybe I should have shown timegrapher again but I didnt know how to describe it in a short way.
@@Watcheyes I see what you mean. Thank you for explaining the complication to me. 🙂
Keep up your great work and videos. All success to you. ✌️
@UlyssesDrax No problem, it was a very good question so I'm glad that you took your time and asked me so I can Improve of needed :) Thank you, have a great day, Best wishes from Sweden.
I heard youre not suppose to change the date from 9pm to 3am because it might damage the movement, is that true?
Beautiful work :) But man those spare part prices 😅
Many thanks Chris :) Haha yes indeed! "Sweaty shopping list"
great job Maestro…why din’t change only the jevel instead to all the pallet fork?
Thank you for commenting, many thanks. It's actually easier to find a new pallet fork then to find the jewels and then get the tools to change it.
Superb work here. Out of interest, what is the approximate market value now that the watch is fully restored?
Many thanks. A bit higher but not huge :)
I have old vintage watch i need to sent to repair any idea how to sent
Very enjoyable to "watch"......
;) thanks for commenting
What is the name of the bracelet removing tool with the two pins?
A masterful video. Great workmanship and incredible video footage. Can I ask, how much does it cost to purchase al the parts for the kiwi cleaner? I've been thinking about upgrading from my old L&R. Thanks and hope your health is doing better.
Many thanks. It depends on what you want to have. But base price is maybe around 350-400 US dollar. Just.my guess, contact the kiwi team in link in my description. They are happy to help. Say hello from Watcheyes:)
@@Watcheyes Thank you. Will do. Seeing yours really caught my eye.
@@WatchRestorationCottage Great :)
How much do you think it would go for now that you repaired it?
Not that much acutally, a bit higher but not that huge.
Think I found my new favorite ASMR channel. I have zero clue about watches or restoration. I have to ask, if the purple jewels are inside the watch, what exactly is their purpose?
They are synthetic rubies and act as bearings for the various rotating pivots in the watch mechanism. With the correct lubrication, the friction is minimised allowing for improved operation and increased life. Rolex also throw in extra jewels for other purposes on occasion.
@@pghgb5572 makes sense I guess. Thanks🫡
As answer below, they are plain bearings instead of for an example ball bearing. Many thanks for commenting, glad you liked it 😀
@@Watcheyes Thank you for the explanation. Can’t wait for your next video!
@@IIBV6B_153MB no problem :)
Where are you obtaining Rolex parts?
Wow. 🥰
Restaurado rolex submariner luxury 😉
Класс!!!
Видно что качество часов высокое.
This is the watch Christopher Walken stuck up his muffler in Pulp Fiction.
😱
Demontaż ćwiertnika w tym momencie jest bardzo ryzykowne.
👏👍
I wonder who owned prior to you? Any info on him.?
Noone paid 8.5 K for that in that condition!
Where do you buy the rolex parts.
Hello, sir，I saw your comment. I have the style you want.
@@Watch_supplier do you sell rolex parts? I don’t need fake watch.
#mamacoo Bolsa réplica 1:1 con imagen reflejada, resistente y resistente al desgaste. Me gusta mucho.
👍👍👍
Thank you for the thumbs :)
Skikkelig bra jobb! Er du norsk?
Tack så mycket! Skoj att du gillade den :) Nej tyvärr, svensk.
Stian of @Vintagewatchservices is already representing Norway - although he is based in Switzerland.
@@Watcheyes Tusen takk for tiden din! Jeg er ny på dette håndverket/kunsten, og videoene dine er veldig nyttige!
@@ciubi12 Vad bra, lycka till med dina projekt, återkom gärna hur det går :)
@@pghgb5572 yes, Stian is the best!
i thought rolex hairsprings were blue
why there are jewels in luxury watch? what are their function? anyone can explain?
All watches have jewels. It's a type of plain bearing instead of let's say you have ball bearings in a bicycle a watch have plain bearings with these jewels.
Eye opener, nice watch but not 10k nice.
I can’t help but wonder if that price was worth the batter watch…. It made a great video but not much profit margin. You can get a functional one for around the same price.
For sure, but this was good project for his youtube channel and will help it grow. Think he is more motivated by his interest for the craft rather than a profit motive.
This dude decided to scratch a Rolex and call it a restoration 🤣
How does a watch get so dirty? It's full of crud!
Because he had some dirt to make the video more impressive
I think you did a great job🥸😄
Many thanks for your kind words 🙏😊🙂