So a 20x12-44 & 20x10-24 will have pretty much the same poke.. I went with a 20x12-44 on 33x12.5 on my 06 Silverado crew cab 1500, looks great, stock suspension height and minor rubbing and trimming.. I love the low wide 4x4 look with alittle factory rake, I do haul my work tools almost daily so it levels out when loaded.. I get tons of compliments everywhere I go, asking how I fit such a big setup on stock suspension
Thank you for this basic introduction to wheel spacing. I used to sell tires and this still answered so many questions I used to have in my head. Awesome job!
So to be clear, back spacing is the distance from the back of the wheel to the mounting point. Offset is the distance from the center of the wheel to the mounting point?
The video Definitely explained offset. Nice job! I’d like to k ow know how far the wheels poke out in inches with each measure of offset. I’m buying a wheel and tire package but having trouble finding what I want. 20x10 -12? -18? I want a little stance but not too much.
Go with a 20x10-24 u won't regret it, I went with a 20x12-44 and live it, 2006 Silverado crew cab on stock suspension and minor rubbing and a full NorCal Tuck but nobody would ever know, looks amazing
What about the fact that knuckle lifts kick out your CVs a inch and a half too? If you want 35s and up, but you don't want rocks and mud always thrown down the side of your truck, what's the your best offset recommendations?
I know you can input your lift in the calculator, but I have a 2 inch lift on my Jeep and there is no option for that. What is the best one to pick to sub it in?
I have a 22x9 with a +25 offset, will I have any issues installing them on a 2000 Silverado with a 6 inch lift? Would I still have the aggressive look?
Overall it can help determine how many times ur tire rolls for a certain distance which will help u find out if ur truck is workin harder which then helps u know how much if any ur mpg drops and ur speedometer is off by
I have a 16 tacoma trd sport with a 2” lift with 22x12 tis 547 on 33x12.50 amp mt and its rubbing in the cab mount can yall make a video or comment explaining a way to fix that issue, thanks!
I've got a discovery 2 I believe stock offset is 57 if I went down to a 35 mm offset would that be enough for a poke on the tire or would I have to go a bit lower ?
Fuller, so glad I came across this video. Was so lost every time you mentioned wheel sizes. Thx for the info.
So a 20x12-44 & 20x10-24 will have pretty much the same poke.. I went with a 20x12-44 on 33x12.5 on my 06 Silverado crew cab 1500, looks great, stock suspension height and minor rubbing and trimming.. I love the low wide 4x4 look with alittle factory rake, I do haul my work tools almost daily so it levels out when loaded.. I get tons of compliments everywhere I go, asking how I fit such a big setup on stock suspension
Thank you for this basic introduction to wheel spacing. I used to sell tires and this still answered so many questions I used to have in my head. Awesome job!
Second. Love Custom Offsets! Team Stance all the way! Also Fuller the way you write 4's is screwing with my whole perception of reality
I never really knew wtf all those numbers truly meant until I watched this video. Thank you!
Glad we could help Chris!
Thanks for a clear explanation, as I'm looking for a package. Now I'll understand the value of offset.
Great info thank you. East to know what you want harder to explain thanks for helping to explain that
This did help understanding how to pick the right size!!
BOOM! fantastic, thanks!
So to be clear, back spacing is the distance from the back of the wheel to the mounting point. Offset is the distance from the center of the wheel to the mounting point?
mounting surface, to edge of lip
The video Definitely explained offset. Nice job! I’d like to k ow know how far the wheels poke out in inches with each measure of offset. I’m buying a wheel and tire package but having trouble finding what I want. 20x10 -12? -18? I want a little stance but not too much.
Look through here! bit.ly/2VuDump
Go with a 20x10-24 u won't regret it, I went with a 20x12-44 and live it, 2006 Silverado crew cab on stock suspension and minor rubbing and a full NorCal Tuck but nobody would ever know, looks amazing
I also run a 33x12.5, u could always go with a little bit smaller tire and have no rubbing and trimming
Hpw much damage am i doing to my suspension components with an 11 wide and - 24 offset?
We have guys that daily 14 wides with little issue. Same for 12 wides! maintenance is key to saving your truck!
Stance life
Good Job thank this was great 👍 Guys
So does this company change offset to your wishes?
I still don’t get why make it so complicated? Measure back spacing, order as such, done.
What about the fact that knuckle lifts kick out your CVs a inch and a half too? If you want 35s and up, but you don't want rocks and mud always thrown down the side of your truck, what's the your best offset recommendations?
Check out some 20x10s on our website here! That sounds like what youd be looking for!
bit.ly/30XxOCG
I know you can input your lift in the calculator, but I have a 2 inch lift on my Jeep and there is no option for that. What is the best one to pick to sub it in?
closest one to it ususally Brian
Thx
Any time!
Any one know what numbers (offset, backspacing) is recommended for wheel set to br flush with fenders on a f150 2017 ?
Send us an email to sales@customoffsets.com and our experts can give you a hand!
Which one has a deeper concave on a 22 by 9 with 18plus offset or 22 by 9 with a 25plus offset?
18+ would have deeper concave. Negative offset has a deeper concave than positive.
@@CustomOffsetsTV thank you so much for the fast response.
I have a 22x9 with a +25 offset, will I have any issues installing them on a 2000 Silverado with a 6 inch lift? Would I still have the aggressive look?
So if I put a 6” lift on my 06 Dodge Ram 1500. Will battle axe d578 22x12 -12 fit on it?
Check out our gallery and see what others have gotten to fit!
Customoffsets.com/gallery
I get what offset is, +/- all that. But what's the purpose? Is it strictly cosmetic or does it serve an actual purpose?
It determines the track width fro the vehicle for the most part.
@@CustomOffsetsTV so then what does that do? I get it makes it wider but what's the advantage to wider vs stock?
Overall it can help determine how many times ur tire rolls for a certain distance which will help u find out if ur truck is workin harder which then helps u know how much if any ur mpg drops and ur speedometer is off by
On the Arkon off road Victory CS-1 22x14 -81 offset how big is that lip?
Roughly 6 inches
www.customwheeloffset.com/store/wheels?sort=popular&suspension=Leveling%20Kit&dia=22&width=14&brand=ARKON%20OFF-ROAD
I have a 16 tacoma trd sport with a 2” lift with 22x12 tis 547 on 33x12.50 amp mt and its rubbing in the cab mount can yall make a video or comment explaining a way to fix that issue, thanks!
Shoot us an email to info@customoffsets.com and we may be able to help!!
Your web page won't let me enter rubicon and only gives me 32 inch tire wheel tire packages with a 3inch lift..
Fuller I have a 16x10 -44, will it rub my Tacoma?
I’m running 3inch suspension, 285/75/16
Maybe I need to just bring my ride out with cash and have you throw some sets at it
I've got a discovery 2 I believe stock offset is 57 if I went down to a 35 mm offset would that be enough for a poke on the tire or would I have to go a bit lower ?
W
😬😬😬🙄
first