Considering the back section, indicator lights, back seat I assume this is not a 2023 model. That's why this sort of link pipe won't fit to the 2022-2023 versions for sure. Just take a look at that end of the mid pipe which is towards the slip on. In case of the newer models it's the end where the pipe from the mufflers/slip ons gets into and has got bigger diameter and clamp on it. In this case the mid pipe link goes into the slip on's end.
@@Solo_Travelling The size of the bread box, the connection and even the diameter of the cat. converter is also different. The link pipe won't fit to the 2021-2023 models here in EU.
eBay, it costs around $80 www.ebay.com/itm/363200114789?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=aj5htjtzqyo&sssrc=4429486&ssuid=viinlp7ftju&var=&widget_ver=artemis&media=COPY
Hi, I have the same Arrow exhaust slip-on (Model No. 71912PRI) ... I want to ask how did you connect the arrow exhaust to the link pipe? Because the arrow exhaust is 60mm diameter while the Link pipe is 51mm? Did you have to cut slots into the arrow exhaust pipe connection?
For that you’ll need a adaptor. If your bike is z900 2023 then this works for you: www.ebay.com/itm/385507527133?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=kYKKEvdtTXy&sssrc=4429486&ssuid=viinlp7ftju&var=&widget_ver=artemis&media=COPY
Keep in mind, the process to fit this to your slip on is a hard process and might need professional help getting it to fit, but I assure you this is the right adaptor
@@awong2912you have that adaptor in the original exhaust.. at least in mine is but is 2024 model.. with smaller breadbox.. so the midpipe won't fit the My2024 model..😢
Nice video! can you tell me about the diameter of the pipe in where you cut? i bought an aliexpress cat delete, but it was 740mm diameter and my 2022 z900 had the pipe of 800mm so i have to pay a guy that make some joint and weld. Now i have an 2023 z900, i measure the pipe and its 800mm so im confused... Seems that fits for all people except me :(
you can't do this on MY 2024 Z900...I wanted to do today .. IS DIFFERENT, breadbox is smaller .. and that midpipe from Aliexpress/Ebay I don't think it will fit...
@@Solo_Travelling I took the cat out which I think made it to where I don’t have enough back pressure cause the ecu flash is going to help me make it to where I have a redesigned fuel map
Yup cuz at this point yall fucked up its natural flow so there for yalll should have left the damn bread box on went w a a Austin racing slip on waited ND ordered a 250 racing ecu flashed already and then put the new ec.u so u would have anyprobs and then go get a racing full exhaust .... yal is a bunch if slow ppl that's like taken a factory muscle car tun around an cut the exhaust at the cats
Considering the back section, indicator lights, back seat I assume this is not a 2023 model. That's why this sort of link pipe won't fit to the 2022-2023 versions for sure. Just take a look at that end of the mid pipe which is towards the slip on. In case of the newer models it's the end where the pipe from the mufflers/slip ons gets into and has got bigger diameter and clamp on it. In this case the mid pipe link goes into the slip on's end.
It is 2023 but ordered the slip-on from Europe. They have different configurations even for the same year models. One adaptor will fix it.
@@Solo_Travelling The size of the bread box, the connection and even the diameter of the cat. converter is also different. The link pipe won't fit to the 2021-2023 models here in EU.
Can you tell me what size blade did you use on the sawzall? Thanks..
Sounds goood 👌🏽 where did you find the replacement pipe between cat and muffler ?!
eBay, it costs around $80
www.ebay.com/itm/363200114789?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=aj5htjtzqyo&sssrc=4429486&ssuid=viinlp7ftju&var=&widget_ver=artemis&media=COPY
Hi, I have the same Arrow exhaust slip-on (Model No. 71912PRI) ... I want to ask how did you connect the arrow exhaust to the link pipe? Because the arrow exhaust is 60mm diameter while the Link pipe is 51mm? Did you have to cut slots into the arrow exhaust pipe connection?
For that you’ll need a adaptor. If your bike is z900 2023 then this works for you:
www.ebay.com/itm/385507527133?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=kYKKEvdtTXy&sssrc=4429486&ssuid=viinlp7ftju&var=&widget_ver=artemis&media=COPY
Keep in mind, the process to fit this to your slip on is a hard process and might need professional help getting it to fit, but I assure you this is the right adaptor
Thank you very much.. I think you are spot on... On the adaptor.. Thanks so much
@@awong2912you have that adaptor in the original exhaust.. at least in mine is but is 2024 model.. with smaller breadbox.. so the midpipe won't fit the My2024 model..😢
@@GingaXMonster how did you fit that adapter into your arrow exhaust? did you just hammer it in?
Nice video! can you tell me about the diameter of the pipe in where you cut? i bought an aliexpress cat delete, but it was 740mm diameter and my 2022 z900 had the pipe of 800mm so i have to pay a guy that make some joint and weld.
Now i have an 2023 z900, i measure the pipe and its 800mm so im confused... Seems that fits for all people except me :(
800mm=0.8meter, large diameter...
Are you getting any backfiring/pops?
A lot of popping on the downshift. No Backfires because the honeycomb cat is still in the stock headers.
you can't do this on MY 2024 Z900...I wanted to do today .. IS DIFFERENT, breadbox is smaller .. and that midpipe from Aliexpress/Ebay I don't think it will fit...
Also be wary of EU models. If you buy Italian parts, they might fit different even If same year models
Naah, its just too much for me, love a slip on sound.
My neighborhood is so peaceful. Every time I cold start, I feel bad lel
I did this and my bike literally runs awful and now I need an ecu flash and a tune.
Did you drill the cat? my cat is still there works fine for me
Really?
@@Solo_Travelling I took the cat out which I think made it to where I don’t have enough back pressure cause the ecu flash is going to help me make it to where I have a redesigned fuel map
@@loganpruitt2805 Yes, If you take the cat out then you'll have to flash it. With the cat in it's still loud but you don't have to flash
Yup cuz at this point yall fucked up its natural flow so there for yalll should have left the damn bread box on went w a a Austin racing slip on waited ND ordered a 250 racing ecu flashed already and then put the new ec.u so u would have anyprobs and then go get a racing full exhaust .... yal is a bunch if slow ppl that's like taken a factory muscle car tun around an cut the exhaust at the cats