Building a Wood Solar Kiln with Green Lumber - Part 2 - The Frame
Vložit
- čas přidán 29. 08. 2024
- Here's the second part of the solar kiln build. The frame is made from poplar.
Music - Artlist
Affiliate Links:
Circular Saw - amzn.to/4aerlpw
Impact Driver - amzn.to/3Ta7IrO
Swanson Speed Square - amzn.to/43PRv01
This is so cool!! I have such a Smart son-in-law...wow, Andrew, you always amazed me at your creativity!! 👏👏👏❤👍
Im building this kiln off your videos as we speak. It's going great so far. Takes more time felling Poplars and milling them than it does building but that's the fun in it. No more home depot 2x4s here!! I hope it's working well for you!
¡Muy bueno Andrew! ¡Te está quedando muy bien la construcción!! Saludos desde Argentina.
Gracias!
How do I figure out what pitched put my roof Or should I just put it at 45゚ like you did
How is that too board cut that sits at the top of your shorter wall? Looks like you cut both sides at angles. If so, what degrees?
I ripped a 2x4 down the middle at 45 degree angle to match the angle of the roof. Hope that helps!
What are floor dimensions?
Inside you can fit a 10.5’ board and it’s about 5’ deep.
@@AndrewMast I'm building off your design except mine is 14 ft x 6ft so as to get 12ft boards in. Getting ready to install insulation in walls this week. Put 2inch Styrofoam in floors. Using insulation batten in walls. Floor dimensions are 14' × 6'
Why did you use 2x4s for the door header?