GT45 Ebay turbo on Cummins!?!?
Vložit
- čas přidán 6. 09. 2024
- Yes I know... it’s been holding up and I’m not scared to spend 8-9k on a new engine if metal pieces go flying in the engine I have a s476 turbo in my room so we are gonna see what happens. It holds 60psi through all the gears with no issues and this turbo has been on many MANY vehicles and abused for almost 2+ years so enjoy 🙌🏽
I’m also putting one on a 12valve! Can’t wait to see what it does. I have 5x18 injectors with a maxed out 215 pump
Nice! I’ve been getting a lot of hate. From guys running those branded ones and this one has beat many trucks out there on a cheap setup 😅😅
Hey lmk how it goes
I’m looking at doing the same exact thing I just have a 185 pump
You ever end up doing that looking at doing the same.
how well did it spool thinking abt doing the same thing...
On3 now offers a GT45 as secondary turbo on their compound kit.
I'd think one of these turbos would work well in a compound turbo setup with the stock turbo for a tow pig, if I ever get a Cummins it might be something id consider...
I’m doing that now on my Cummins I’ll let you know
@ozarksspoolstorehotshottru7398 how did it perform towing
I,know this is old but how are you making 60psi out of the gt45?
Gt45 is a bigggg turbo man lol I think the one I have is a 98mm
Oh and by the way it’s still running and Hauling ass... STILL NO SHAFTPLAY ON A CHINESE TURBO 😂
This thing will take 60 psi probably with bone stock studs if you tune it right. The stock tranny will be long gone before you have enough holding power to lift the head in my experience anyways. I have mine at 50 psi I was inspired after this and for 250 bucks for 50 psi why the hell not. Run it till failure and put a new one in. Boosted bois made 675 ona k series Honda with a eBay 100$ turbo then ran a 9 sec quarter mile. IV rebuilt a few China turbos and they are all quality especially if you port it and do the work they didn’t do then it’s a good turbo
Im most concerned about how it spools
Still spoolin?
I’m about to put one on my 12v what boost numbers you getting?
Currently bumped it down to 40psi tune as I have a switch now I’m very impressed with how long it has lasted. Plus I’ve been definitely abusing it like no other without being scared that it’s going out 😅 don’t listen to others out there. I have one on stand by just in case it goes out. Beats having to spend 700 on a rebuilt one
It’s on its way! Thanks man
Let me know how it holds up I’m looking to do the same thing 185p pump nv4500 12v
@@thathornyvette2358 how much horsepower is it putt out with that turbo
How’s it holding up?
What rpm is that 6.7 spooling it at?