Resin Tinting a Surf Board
Vložit
- čas přidán 24. 10. 2021
- Glassing my custom new surf board!
This is my humble Garage Board Shop where I make small batches of custom surf boards for the SoCal community. Developing a sweet little high volume short board designed exactly for SoCal waves!
#howtomakeasurfboard #howtoglassasurfboard #resintint #surfboardglassing #shapingsurfboards
Shirts Hats and Boards on our website!
- www.rockandseagarageboardshop...
Insta
- / rockandseagarageboardshop
Sub-Reddit Shaping forum/community to Share the Stoke and Ask Questions
- / rockandseagbshop
Safety Gear___________________________________
3M respirator - Love this one, definitely recommend
-amzn.to/3JuGdE6
3M Dust filters
- amzn.to/3oUAgXH
3M Organic Vapor Filters
- amzn.to/3PTBRsJ
Rice Paper for Logos __________________________
- amzn.to/3zX5GDf
Fin Marking Jig_______________________________
- foamez.com/product/casica-fin...
Glassing Tools________________________________
Cheap Yellow Squeegees I like
- amzn.to/3d6EfO6
Hot Coat Brushes_____________________________
3” Brushes I Use
- amzn.to/3vEHva8
Sanders_____________________________________
Porter Cable Random Orbital sander:
- amzn.to/3BFrXXg
Dewalt Sander
- amzn.to/3QirRc9
Festool R0150 - Ultimate Sander!
-amzn.to/3vFRxI0
Flexpad 8"
- greenlightsurfsupply.com/prod...
Mirka Sanding Screen - My recommendation, does the best job with dust control when using a vacuum
- amzn.to/3Jt8US4
Festool Sand paper
- amzn.to/3OTOMJS
Vacuum Hose
- foamez.com/product/slinky-hose/
Planers__________________________________
Wen Planer
-amzn.to/3PYCvoF
Makita Planer
- amzn.to/3QisbaR
Measuring Calipers _______________________
- foamez.com/product/e-z-scisso...
Hand Plane______________________________
Stanley Hand Plane
- amzn.to/3oT8pXR
David Combie Hand plane
- foamez.com/product/david-comb...
Hobby Hand plane
- fiberglasssource.com/products...
Shop Vacuum___________________________
Shop Vac I Use
- amzn.to/3zzAZ5F
Scissors_______________________________
Carbon Shears
- amzn.to/3vFRFas
Fiberglass Scissors I like
- amzn.to/3oTfF5Y
Electric scissors I like
- Not as nice as ultra fancy electric scissors but works great for the hobbyist
- amzn.to/3oVkImt
Air Brushing Tools/Supplies_______________
Air Brush Spray Gun
-amzn.to/3zXJ19V
Acrylic Paint thinner
- makes acrylic paint less viscous for easy use air brushing
- amzn.to/3A76jdD
Airbrush cleaner for acrylic paint
- * definitely use after every use or your HVLP air gun will get clogged up fast!
- amzn.to/3Jz5rS6
Sticker Cutter - Cameo 4
- amzn.to/3pdG52R
Sticker Material I Use
- amzn.to/3OYZPBB
Epoxy resin ___________________
- slow cure if your new to glassing, gives you more time to work on the board
- greenlightsurfsupply.com/coll...
- fast cure if you feel confident and can laminate a board fast
- greenlightsurfsupply.com/coll...
Fiberglass Cloth ________________
- * cheapest out there for budget builds but still great quality!
- shapersupply.com/collections/... - Jak na to + styl
Was that three layers of glass on the deck? Your buddy must be stout!
Yes sir! You lose a little bit of flex, but
boards are just so much more ding resistant and last longer with an extra layer, technically 50% heavier glass job! If your a super good surfer worth glassing lighter, but for most people heavier Glass jobs give you way more bang for your buck!
I’m having trouble with getting the foam saturated on the bottom lap, what should I do?
I seriously that can be one of the most frustrating parts! The easy answer is to just start mixing more resin so you have more to work with and water fall off the rails till you get better at it. For the deck of this board I laminated with 3 layers of 4 oz cloth and used 64 oz resin so I could quickly water fall the resin and not worry about it. Some guys will fold up the lap onto the deck and dump resin on the folded lap, it takes more time than water falling but doesn’t waste nearly as much resin
Aprende a hacer tablas
Heck ya, I love to hear others out there are getting into making their own boards, it’s such a cool thing to do!
I’m having trouble with getting the resin to bleed through on the bottom lap, what should I do?
Are you using poly or epoxy? Epoxy is notorious for bleeding under the tape and you will get a little bit almost guaranteed at least for me. To trouble shoot 1st really push down the tape hard, easiest thing that might be causing issues. Second tip is her high quality high temp rated tape, the tape adhesive on most tapes breaks up and loses its stickiness when the resin heats up during curing and the tape doesn’t stick well letting resin leak. Gold standard is 3m 233+ tape which had that temp rating, or indasa tape, I personally really like indasa shapersupply.com/products/indasa-mty-tape-sleeve?_pos=11&_sid=91ad0cdb4&_ss=r