Samsung M02s Hang On Logo Solution / Samsung Phone CPU Rebool Trick

Samsung M02s Hang On Logo Solution
If your Samsung M02s is stuck on the logo screen and not booting up properly, you can try several methods to troubleshoot and resolve this issue. Here's a step-by-step guide to help you get your phone working again:
Force Restart:
The first step is to try a force restart. This can help clear any temporary glitches in the software. To do this:
Press and hold the Volume Down button and the Power button simultaneously for about 10-15 seconds until the phone vibrates and restarts. Release the buttons when you see the Samsung logo.
Boot into Safe Mode:
Sometimes, third-party apps can cause problems that result in your phone getting stuck at the logo screen. Booting into Safe Mode can help you determine if this is the case.
Press and hold the Power button until you see the Samsung logo.
When the logo appears, release the Power button and immediately press and hold the Volume Down button.
Continue to hold the Volume Down button until the phone finishes rebooting.
If your phone boots up successfully in Safe Mode, it means a third-party app is likely causing the issue. You can then uninstall recently installed or suspicious apps.
Wipe Cache Partition:
Clearing the cache partition can sometimes resolve booting issues. Here's how to do it:
Turn off your Samsung M02s.
Press and hold the Volume Up button, the Power button, and the Bixby button (if available) simultaneously.
Once the Samsung logo appears, release all the buttons.
Use the volume buttons to navigate to "Wipe Cache Partition" and use the Power button to select it.
After it's done, select "Reboot System Now."
Factory Reset:
If none of the above steps work, you may need to perform a factory reset. This will erase all data on your device, so make sure you've backed up your important data before proceeding. Here's how to do it:
Turn off your Samsung M02s.
Press and hold the Volume Up button and the Power button simultaneously.
Release the buttons when the Samsung logo appears.
Use the volume buttons to navigate to "Wipe Data/Factory Reset" and use the Power button to select it.
Confirm the reset by selecting "Yes."
After the reset is complete, select "Reboot System Now."
Seek Professional Help:
If the issue persists even after trying the above steps, it might be a hardware problem. In such cases, it's best to contact Samsung's customer support or visit an authorized service center for further assistance.
Remember that a factory reset should be your last resort, as it erases all data on your device. Make sure to back up your data before proceeding.
if all method not working then reboll cpu