1990 Silverado stepside super clean with flowmaster 40 series and 5.7 engine with sound proof interior #15x10 eagle alloys with 295/50-R15 tires on a 5-6 drop new paint all original interior runs like a champ
@@thefrankensteinbrothers4763 nice I have a rusted 1997 c1500 extended cab we might get rid of it it has a engine problems I want to restore it but my parents don’t got hope on me 😬
I find it interesting too 🤯 I guess some people can’t read the captions 🙃 I don’t mind answering all the same questions over and over ℹ appreciate the love or hate . I might just make a new video explaining everything that has been done to the truck 🛻
@@Quijas707 is it because the fenders hit the tires or because of ride quality? I have same tires but they sit more flush (but not completely) I was thinking of the 4/6 but if I’m going to be hiring tires than I’ll go with the 3/4 like you said.
I just got a shell igualita except for the drop n the wheels but dang it looks nice!!! Did u cnotch ? I want to drop it but dont wanna cnotch i want to use the bed even tho its small lol
Hey bro I have 295/50/15 all the way around on my obs with a similar drop like yours. Do you rub when turning the wheel? Seems like I’ve been having that problem a lot. Thanks
Ik your description says 5/7 but I just read all comments and you say it’s a 3/4 4/4 5/6. In different comments At this point I am so confused haha. What drop do you have in the video with the 295/50 setup. And also what kit did you go with. Belltech and Mc gaughys is what I see to be the best. Thanks
Thanks for reading all the comments 👍🏼 it’s about time someone pays attention . The truck has gone through different drops and lifts depending on the way I feel comfortable. In this video it has a 5-6 . It was before the airbags were installed and the brand is mc gaughys .
@@reytarango691 No rub at all. But I didn't run them up front for long on mine. I've got a '73 stepside. I've still got the rears. I just love the old school look.
im about to ask a dumb question but does anybody know if you can get the stepsides in metal the fiberglass always gets chipped and messed up truck is bad ass btw
Disculpa tu le pusiste espasiadores para que salgan los rines? Yo tengo unos 15 y ando viendo su la bajo pero no quiero que pegue ma llanta Gracias saludos
@@Quijas707 very nice. Love the stance. I have a 97 sierra 2 door long bed and have been looking at various trucks like yours to get an idea of what direction I want to go with it. Have a great day.
@@Quijas707 perrona su troca compa.tengo una chevrolet 90 step side la quiero bajar tengo unos rines 15x12 y llantas 295/50/r15 cual drop kit tienes en este video y cuantas pulgadas tienes entre la llanta y el fender.espero tu respuesta carnal
But like rubbing where i wont be able to drive on them at all or jist when i hit a bump? Ive seen a guy go 295 on back and 245 in front 5/7 but i wanna go 4/8 with all 295
Badass truck thanks for sharing
beautiful truck 🚚
Ok . I'm inspired . Time to do one of my own .
mannn, that's what's happening 💪🏼💯. I'm a old school 2.
Same here my friend 👽👍🏼👍🏼
I really love these trucks I've built like 6 of them and I never get tired of seeing them on the road even old school style I like even better
Do you need good money to make one of these?
@@obsmartin900 the only hard part is finding them prices have started to go up but they're cool fun truck to play with
@@thefrankensteinbrothers4763 nice I have a rusted 1997 c1500 extended cab we might get rid of it it has a engine problems I want to restore it but my parents don’t got hope on me 😬
@@obsmartin900 if it's something you really want don't give up the slightest bit of ambition make big things happen
@@thefrankensteinbrothers4763 is a engine swap a good idea?
It's funny everybody asking the questions that are clearly in the description. Nice ride 👌
I find it interesting too 🤯 I guess some people can’t read the captions 🙃 I don’t mind answering all the same questions over and over ℹ appreciate the love or hate . I might just make a new video explaining everything that has been done to the truck 🛻
One of, if not my favorite color. Great job, awesome truck!👍
Thank you
@@Quijas707 You’re welcome.💯
Hermosa camioneta felicidades compa
Gracias compa
Sick asf we want more content 🙏🙏
Thank you. I will be posting more soon
Love it!!
She's a beauty
That is SWEET
Thank you 😊
🔥🔥🔥🔥🔥
Nice!!!
0:06 pause aweshome!
Ok this one is other level
Thank you
🔥
Esta. Perrereeeeeeeriiiiiisimammamma
California Style 🌴
nice
Fuck. This is clean man, I have 15x10 to. Was going to do a 3/5 drop. But my end up going with your drop 5/6
You will be better off with a 3-4
@@Quijas707 is it because the fenders hit the tires or because of ride quality? I have same tires but they sit more flush (but not completely) I was thinking of the 4/6 but if I’m going to be hiring tires than I’ll go with the 3/4 like you said.
It used to rub on the fenders
I started with a 5-7 drop on 22” wheels
Stepside likes cool durie
How did you do the rear end? I notice the rear step delete and other stuff done to the back end.
I just got a shell igualita except for the drop n the wheels but dang it looks nice!!! Did u cnotch ? I want to drop it but dont wanna cnotch i want to use the bed even tho its small lol
Small c notch. I can use bed
did you put spacers on them or that’s how wide the wheel is cause i got a 1990 chevy
Chulada
Esa dies troca. Perrona
I’m doing a baby dully set up I think I need some beefer wheels 🛞
En dónde compraste esos rines tan chidos tu troca está súper perrona
eBay. Gracias
What backspacing are the rims? Are they 295 all the way around?
-44 yes it’s all 295s
Hey bro I have 295/50/15 all the way around on my obs with a similar drop like yours. Do you rub when turning the wheel? Seems like I’ve been having that problem a lot. Thanks
Hey bro , they don’t rub when turning only if I hit a big bump going fast 💨
Post a vid
What would you like to see ? I’ll make it 👏🏻
Ik your description says 5/7 but I just read all comments and you say it’s a 3/4 4/4 5/6. In different comments At this point I am so confused haha. What drop do you have in the video with the 295/50 setup. And also what kit did you go with. Belltech and Mc gaughys is what I see to be the best. Thanks
Thanks for reading all the comments 👍🏼 it’s about time someone pays attention . The truck has gone through different drops and lifts depending on the way I feel comfortable. In this video it has a 5-6 . It was before the airbags were installed and the brand is mc gaughys .
Did you need to swap out for longer studs using a 15x10 wheel?
No . I am going to in the future for safety
I like the side view mirrors. What are they from
BMW m3
15x10s with 295/50/15s just sit right!
Can you turn alright?doesn't rub
@@reytarango691 No rub at all. But I didn't run them up front for long on mine. I've got a '73 stepside. I've still got the rears. I just love the old school look.
Yes , it turns just fine no rub
Did you have to roll your fenders any cause I have the same wheel setup and wanna drop it but don’t know what drop I should chose
They are rolled but not because of the wheel set up it has now . I was running 22s before and had them rolled for them.
Are you running any type of spacers or are they just that wide
The rear has a 1” spacer for the wide look 👀
im about to ask a dumb question but does anybody know if you can get the stepsides in metal the fiberglass always gets chipped and messed up truck is bad ass btw
I’m sure if you find a good fabricator he might be able to do for you. The whole sides of the bed is one piece of fiberglass
295/50/15 all around???
I have 31x10 nd bought a flip kit nd springs will I need to down size the tires or am I good?
Just use a tape measure to find out how much your truck will drop . That will give you an idea if your tires will rub
How does it ride? Assuming your not on air and you have minimal travel?
It’s a bit stiff but not that bad
question and the tires don't turn
How far off is the speedo with that tire size vs stock..? I know this tire is almost 3in smaller than stock
Not a problem at all
Nice! What is the name of those mirrors?
BMW m3
I wonder if wheels like that will fit on short bed S10 truck
I’m sure they will
Did you need spacers or anything to get the offset wider or is it all stock with the wheels
I’m asking the same question. They stick out a lot.
At this time I had 1” spacers on the rears
@@Quijas707any clearance issues come around? Like rubbing or wear not equal on tires?
@deadass9493 some rubbing but no so bad only on big dips on the road . Wear is even on all tires no issues.
Hey brother, I have a 90 chevy Cheyenne, can you please tell me where did you buy the wheel and tires?
eBay. I just found them and bought them
This guy sells these types of Wheels instagram.com/compaa_rafaobss?igshid=1egeu123bq1ip
What exhaust do you have? it sounds really clean bro
Flowmaster 40 series
I got a TOY like that one LOVE my TOY.
Are they on adapters or why do they stick out so much?
No adapters . Just wide tires
Is that a 4/6 drop and does the front hit?
It started as a 5-7 and I lift it up to a 3-4 when I changed the wheels
Are there spacers on it or just a wide wheel
1” on the rear
What exhaust are you running?
Flowmasters 40 series
Primaso yo tengo un Jeep liberty standard y quiero ponerle llantas así de esté estilo, que me recomienda
Pienso que si le quedan bien 👍🏼
Que drop tiene la troka para que quede asi los 15 x10
4-4
Is that the 4/6 drop?
3-4
Very nice truck. What door mirror is that?
BMW m3 .
How did you stop it from rubbing?
Bump stops on the coils and airbags on the rear
@@Quijas707 thanks man appreciate the reply
No problem 😉
You add any spacers? That looks like a 15x12
15x10s all around with 1 inch spacers on the rears
What's the back space on them
Negative 44
Disculpa tu le pusiste espasiadores para que salgan los rines?
Yo tengo unos 15 y ando viendo su la bajo pero no quiero que pegue ma llanta
Gracias saludos
Solo los rines de atrás tienen 1” spacers y la baje 3-4 también tiene bolsas de aire atrás para cuando le subo peso . Saludos amigo
@@Quijas707 oo ok
Donde compraste el kit para bajarlo o que fue lo que compraste ?
Lo compre en eBay
What drop do you have ?
3-4
What color blue is that?
It’s called “French Blue”
What drop is that ?
3-4
Bro what drop you have?
3-4
Size of tires and drop?
295/50r15 on a 4 inch drop all around
Es posible que esos rines le queden a una ford f-150 modelo 1996?
Si le quedan
Como le ago e buscado ese tip De rines para mi chevi asi anchos no los encuentro ayuda plz?
eBay
Nice truck what drop does it have
4-5 .thank you
Does it ever rub ? I have 90 wanna do same drop but alot say ima have rubbing issues
Just make sure it has a limited amount of flex and you will be fine
Alright cool thanks bro ima make sure I do love ur truck n stance cant wait to get mine like that 👍👍
Good luck ✌🏼thank you
What offset are those 15x10?
Negative 44
@@Quijas707 yea I remember from another conversation we had. I saw the truck but thought it was another by mistake. Thanks.
What drop is this?
4-4
What drop is it
4-5
my problem I'm having now is dang rocks like to flew straight in to the side of my door and dent it
I don’t have that issue yet .
What size are those exhaust tips
4 1/2
@@Quijas707 thanks and the length?
? What drop is on it
3-4
do they rub at all
Not anymore
Buenas bro tengo una igual que medida le pusiste cuando la achaparraste??
4 enfrente y 4 atrás
@@Quijas707 donde conseguiste el kit
@alanrubio4170 eBay
@alanrubio4170 cuál kit ?
Does it rub any
Yes
Where did you buy your rims ??
eBay
@@Quijas707 what’s the name for those wheels ??
Eagle alloys 226
What size tire?
295/50-R15
@@Quijas707 What size rims and offset. Nice truck
15x10 with negative 44 . Thank you
15x10 with negative 44
What was Total cost of restoration
Around 10 grand . The paint was the most expensive part of it .
What drop is that
4-4
Wow that probably the obs in the whole CZcams community
where did you buy your wheels?
I got them from eBay
@@Quijas707 what's the offset??
Negative 44 . This is a question I get asked all the time.
@@Quijas707 very nice. Love the stance. I have a 97 sierra 2 door long bed and have been looking at various trucks like yours to get an idea of what direction I want to go with it. Have a great day.
Anything I can help you with just ask . Good luck 👍🏼
Bitchin !👍👊
Hello wat size are they and tire size please
It’s on the title of the video. Some people don’t know how to read . 😂
Quiciera saber cómo se llama el mofle que trae la camioneta
Flowmasters 40 series
What’s the drop
3-4
Whats the drop
3-4
wha drop is that
3-4
Yo bro do the tirs not run when you accelerate
No , they don’t rub . Only if I hit a pothole
no ig ?
904GO
What's your backspacing any information will be appreciated
Negative 44 . Decided to give the rear 1 inch spacers for extra pop
@@Quijas707 perrona su troca compa.tengo una chevrolet 90 step side la quiero bajar tengo unos rines 15x12 y llantas 295/50/r15 cual drop kit tienes en este video y cuantas pulgadas tienes entre la llanta y el fender.espero tu respuesta carnal
En este video es 3”. 4” . Enfrente es 1.5” y atrás son 2” . Gracias 👍🏼
@@Quijas707 gracias compa otra pregunta al bajarla 3/4 hay que poner el kit completo que viene con todo y los shocks??
Depende que kit compres . El que compre venía con todo lo necesario
You think a 4/8 will rub?
Definitely
But like rubbing where i wont be able to drive on them at all or jist when i hit a bump? Ive seen a guy go 295 on back and 245 in front 5/7 but i wanna go 4/8 with all 295
@alejandrobelmarez1956 the only way to find out is try it
@alejandrobelmarez1956 the only way to know is to try it
Whats the offset of those wheels.
-44
What’s the offset of them
Negative 44
How much to buy it
Not for sale
that dun rub?
Yes
Pero. Me. Pregunto. Y. La. Silverado. Apa???????
I’m thinking about trading my car in for 1
La vendes
No
Cuánto por la troca
No está de venta
Are they 15x10 or 15x12
15x10
@@Quijas707 bad ass truck unstill have it and where u find the rims am looking for some
Yes I have it , it’s not going nowhere it’s been in the family since new . I bought them on eBay by searching 15x10 baby billets .