3:50 what a relief!!! finally someone listening to music while working! I was already thinking how monotonous it must be to work in this location just listening to the machines.
Rather strangely, BMW isn't everyone's toy or car. It isn't gas and goes car, which all you need to know is how to drive. It is something where both cars and driver needs to pay attention to it during its life.
It's no wonder the injectors and glow plugs are so difficult to remove when replacements are required, using aluminium for the head and steel for the injectors and glow plugs is a bad move if you don't oil them on assembly because those two metals react with each other making it hard to remove them some years ahead.
Americans dont care about CO2, they only care about other emmisions. So the petrol engines are cleaner in that regard. And they think anything over 20 mpg is great. Petrol is cheep.
Are those block made of Iron or aluminum? I would worry if aluminum as the high compression of a diesel could be a problem. All truck engines in American use a iron block or Ford uses some kind of speical block made in house. I guess they could use aluminum as it is a very small diesal engine and its not for towing like 10,000 pounds like a truck.
Aluminium, BMW have used aluminium blocks on their diesels for years - 2005 for the M57TU2. Aluminium has a better strength to weight ratio than steel.
Otherwise those technoslaves will get out to a street to look for drugs, but here they are under full control, they have a dream to pay credit and they have a good wage to do it. Not more, but they are happy.
Is it just me, or do you guys notice Benz workers have better attitude and seem more skilled than BMW workers? Look at the AMG 6.3 engine being assembled.
Are you kidding me? You don't just run a bolt or nut with impact especially when everything is not aligned. These people should take more pride in their jobs your getting paid regardless.
BMW timing chain bring me here
🎃
3:50 what a relief!!! finally someone listening to music while working! I was already thinking how monotonous it must be to work in this location just listening to the machines.
I love watching vehicle assembly....don’t know why! :D
Ultimate video would be someone talking through what's being fitted so it makes sense to people watching, otherwise it doesn't mean anything to them.
Csodálatos videó tanúlságos köszönöm szépen 🤗
W
Rather strangely, BMW isn't everyone's toy or car. It isn't gas and goes car, which all you need to know is how to drive. It is something where both cars and driver needs to pay attention to it during its life.
excelent work i realy like decipln
Super. Brian is great
Ahhhh the N47 engine!
Love bmw 🌹👍👍👍👍👍👍👍
صناعه تستحق الاحترام ...الاخلاص في العمل
Had a good day dear!!
Wow very nice video BMW engine fitting ok thanks
BMW je zakon !!!
Nice but I really don't like to see that they are now swapping out some of the metallic hardware for plastic.
Best Diesel ever!
:D really ?
U mean M57
Ok, Yes -BMW!!!!!
It's no wonder the injectors and glow plugs are so difficult to remove when replacements are required, using aluminium for the head and steel for the injectors and glow plugs is a bad move if you don't oil them on assembly because those two metals react with each other making it hard to remove them some years ahead.
David Ellis
Yep mix of acetone and penetrating oil to try penetrate the bastards
👍👌👏😎
@@muirallie la in use in canada la maison
oÑ
@@rafiklokchiri3390 qñññppñ. Ññ ñ
I'm Filipino ilike this work🥰
bellissimo motore catena debole
Why do I now want to own a 3 series 6 cylinder diesel from BMW? Oh yeah! never mind...
None
Engine is BMW !
It's too bad that we can't get those manual transmission diesels in the US.
Americans dont care about CO2, they only care about other emmisions. So the petrol engines are cleaner in that regard. And they think anything over 20 mpg is great. Petrol is cheep.
А в России можем ! 😎
Yes exelente 👍
Me encanta.
हिन्दी भाषा में विडियो बनाओ
ऐसी विडियो बनाने के लिए धन्यवाद
ऐसी विडियो बनाते रहे
8:06 guy just slams the injectors into the head. No wonder they break all the time.
I hardly think he slams them in.
والله هذا ابداع
This is the Steyr plant in Austria? Seems BMW has a few of their engines made over there.
Yes it is
يتقنون العمل في كل شيء يحياو الالمان
thats crazy
Quality ....................
4:35 the famous timing chain...
someone needs to tell them that timing chains go on the front of the motor, not the back
That is not the timing chain.
That is the lower timing chain, the upper can be seen @ 4:29
bmw is simply: timming chain at the back = owner workforce = $$$$.
@@tab8k it is not the timing chain, top nor bottom, it is the oil pump chain
Motore N47 = rottura della catena di distribuzione
I want one. BMW Diesel.
Are those block made of Iron or aluminum? I would worry if aluminum as the high compression of a diesel could be a problem. All truck engines in American use a iron block or Ford uses some kind of speical block made in house. I guess they could use aluminum as it is a very small diesal engine and its not for towing like 10,000 pounds like a truck.
Volvo Trucks use aluminum blocks made in Sweden
Aluminium, BMW have used aluminium blocks on their diesels for years - 2005 for the M57TU2. Aluminium has a better strength to weight ratio than steel.
US designed and made engines are just poor quality and relics, they still use pushrods. Nothing wrong with aluminium.
9:27 and this is the part that ruins these engines....literally....
which is?
in no time they will install a separate DPF for that cooled EGR pipe lol...
@@1tokeover worst way to safe some CO2
@@Squilliam-Fancyson it does'nt affect co2 at all. It's there to reduce nitrous oxide.
@@stevenliu3744 Ah, a Chinese expert who knows better! So why is China stealing European car technology then?
Monotonna praca jednotvarna bez pridanej hodnoty
One small mistake in a factory setting like this results in millions of automotive recalls.
I'm love BMW
Я тоже 👍👌😎👋
10:00 she is beautiful.
yes :)
Need video of the Mexican factory where my car was built
👏👏👏👏👏
Compare this to BL in the 70's!
looks more like N57!
❤
Why need that crankshaft with unreplaceable sprocket? Missing M57
Like
Cool super 🇹🇷🕋😎😎😎🌹❤️
Where is the gas kit
The factory looks impressive. however, stand for eight hours every day and pat the same thing over and over again ... not an ambitious task.
Otherwise those technoslaves will get out to a street to look for drugs, but here they are under full control, they have a dream to pay credit and they have a good wage to do it. Not more, but they are happy.
Dejavu
Happy to say jobs like this exist… For people who have no graduation nd have nothing left.
Well aren’t you all a bit judgemental. Bunch of jerks.
@@Elkjan22 Leute ohne Abschluss sitzen in Deutschland auf der Regierungsbank. Für diese Arbeit wären sie zu blöd!
530d
好的
Ok
Why new engines doesn’t last long as oldies?
Hợp kim
Is it just me or are these 6 cylinder engines? Not four. Edit: different engines at end.
4 and 6 on the same line.
such high tech, but but quality like korean low cost cars or worse
Are those engine blocks iron or aluminum?
DJPelio its iron :-)
Sorry to say but unlike traditional diesel engines, this particular engine has an aluminum crankcase.
inner core is magnesium. Its cast as 2 pieces
Aluminum mostly. Forged rods and crankshaft.
aluminium
تعليقات.اليوم.حول،الجفاف.الذي،ذرب،هذهي،سنوات،الخيرة،وخاصة،خذهي،اسنة.اطلب.من.الله.ميغثنا.غيث.نافيعا،،،
বাংল নম পাসরে
第~疵
Motor BMW (20d ) N47 and B47 have the problem a distribution...!!!
Electric car is future ...!!!
Is it just me, or do you guys notice Benz workers have better attitude and seem more skilled than BMW workers? Look at the AMG 6.3 engine being assembled.
Ken Green thats not same comparison amg is not mass production and made by single guy
AMG 6.3 as you refer is actually 4.0L plus these are mass produced engines for almost a dozen different BMW models...
Are you kidding me? You don't just run a bolt or nut with impact especially when everything is not aligned. These people should take more pride in their jobs your getting paid regardless.
After doing the same task thousands of times, i think they know what they're doing
Is this a toilet factory?
Nice to look at, but this brand is of very poor quality nowadays 🤔. And everybody knows that.
Bmw is waste.
❤