Simple DIY Checkerboard: Craft with Minimal Tools
Vložit
- čas přidán 4. 08. 2023
- #diy #beginnerwoodworking #woodworking
With just a few easy-to-find materials and basic tools, you'll be able to construct a checkerboard in no time. Our detailed tutorial provides clear instructions, allowing you to follow along step-by-step. Creating this DIY checkerboard not only offers a fun building experience but also provides lots of entertainment with family and friends.
DISCLAIMER: Woodworking and the use of power and hand tools can be extremely dangerous. You are responsible for understanding the safe use of your tools and techniques. Your safety is YOUR responsibility, I accept NO responsibility or liability for any injuries, accidents, death occurring to you or others if you attempt to do the things that I do or use advice that I give.
Hey there it's Wes...If you have any projects or specific questions you might need help with go to
www.woodworkingwithwes.com
Very nice. Something to consider is that when playing chess, the white square should be in the bottom right corner. That's something to consider when you are orienting the grain. People tend to expect seeing the grain go up and down rather than sideways. It was done correctly in the video, but I thought it was worth mentioning.
The whole time watching the video I was thinking _please don’t end the video setting up chess pieces with the wrong orientation!_ ☺️
Brilliant project Wes! It looks fabulous 👌👌👌👌🔥🔥🔥🔥
Awesome chess board, and the audio was perfect!
Looks perfect! I needed some inspiration for the border. Might give this a try, looks beginner friendly. Thanks for sharing!
Go for it...thanks for watching, Wes
Beautiful!
Beautiful. I'd love to see you make it into a table, maybe with a walnut lathe-turned center balustrade with three legs? There could be a shallow drawer for the game pieces.
Excellent!
Gluing end grain and wrapping it with solid wood. I'm sure that it won't have any issues
I have built many boards and have never experienced any problems :)) Thanks for watching, Wes
Nice
Do you usually use the table saw fence to make the cross cuts? Seems ok when the board is 20x20 but when it gets down to 6x20 seems difficult? any thoughts?
These solid wood boards always looks so amazing, but I'm always worried about them cracking or splitting because of wood movement. How do you decide if you are going to get away with wrapping the wood in a frame like that? I stuck a few numbers in a wood movement calculator and a board that size could potentially move by more than a quarter of an inch depending on the climate and whether it is flat sawn wood or not. That would put a huge stress on the frame, no?
Hi..I have built many boards and have never experienced any problems :)) Thanks for watching, Wes
Seal every side and no problems. Moisture change causes the movement
I'm grateful. 😃😃😃
Do you have to worry about wood movement with the out wood bands?
Hi David...no, not large enough pieces. Hope all is going well for you! Thanks, Wes
Use calls with C clamps to keep flat