Gas turbine engine running on Jet fuel. KJ66 Miniature.
Vložit
- čas přidán 19. 02. 2021
- Successfully tested engine with aircraft fuel. Started initially with Propane then switched to liquid fuel. Will later increase the fuel to check rpm.
- Věda a technologie
you are the one who make indias frist miniature gas turbine engine
Good to see someone else in India is also doing it. Let me know if you'll need any help.
Great work bro 👍
Well done it's a lot more lively with liquid fuel ,be careful were you point it as it will kill the bush/tree .
Thanks for nice words. Now the thing in my mind is if I keep on pushing fuel at what point the engine can bear or like when it can get risky. Do I note the vibrations? Turbine no longer gets hot now.
@@TeamRCHyderabad
depends on what bearings you are using and and bearing set up /preload /oil system I have run standard steel bearings to 10 psi case pressure ,best way is to do short runs and slowly increase rpm/pressure and check for bearing smoothness and vibration. shut down if you hear any unusual noise and check.
Excellent work khaled 👏 👍
Thanks 😊
Good working
Looks powerful
Yes it does.
Thrust?@@TeamRCHyderabad
Nice bro
Well done bro
Thanks Umar
Great work brother, really happy it's a video from India... I've few doubts... are glow plugs necessary, do you use them?can ceramic bearings help in neglecting lubrication? How much did it cost for you overall? ...Would greatly appreciate a response, anyways nice bro.🔥🔥🔥
Glow plug not nessary to start combustion. Torch lighter can also be used. Ceramic bearing does not require as much lubricant I think as they don't get that hot. I am using normal stainless steel bearings. More than cost it's the efforts to design build test then failure many times. There is always room for improvement. Hope I answered your question.
@@TeamRCHyderabad Thank you very much brother, i really appreciate your quick response ...It helped a lot.
What difference between burner and engine
Wow, We enjoyed watching the engine video.
We are students in the Department of Mechanical Engineering in Korea, trying to make a kj66 engine. Is there any reference data?
We are looking for performance curves for the impeller and turbine of the kj66, and if you have the data, can you help me?
Any help would be greatly appreciated.
You can contact me khaledbakhtiar@hotmail.com
Hey
박다움, We are conducting the same project and aren't able to start it either , do you mind sharing any information regarding the subject... Thank you in advance
@@ny7674 How did your engine project going. I am curious to know.
@@TeamRCHyderabad sad enough to say , we had a major problem with back pressure and couldn’t solve it …
@@ny7674 Are you following KJ66 documents. Clearance at the compressor wheel and the turbine wheel. That is important.
How are you injecting fuel?? Is it a pump with a nozzle?? I want to know for my project 😁
Fuel is injected using a brushless pump
Bro can you tell what meterial you have used in exhaust nozzle and combustion chamber.
SS304 Metal
@@TeamRCHyderabad thanks bro
You are the only one after DG Propulsion, which is working on Turbines. What is the thrust output for this engine.
Thrust is about 5kg
Can you share an email address to connect with you.
With out the motor, how it's speed is increase?
Speed is controlled with flow of fuel.
👏👏👏
Thank you
Yar iska fuel kaha sa lia , do u guys sell a1 jet fuel
Some of my well wishers arranged this jet fuel for me. I don't sell any.
Hi Anna , I wanted to buy jet engine, from where to buy, Is it available in India, I wanted to run it with Jet-A fuel
I wanna buy it
How many pounds of force does it push with
At the moment it's giving 3kg of force. But after fine tuning it should give upto 6-8kg.
@@TeamRCHyderabad ok, what if you used hho/ oxyhydrogen
@@user-kg5ux7iu1btoo explosive and fast burning of a fuel and even if you could get it to run on that fuel it would definitely be very dangerous and melt the turbine wheel and other internal components. They run very good on jet fuel, diesel, biodiesel and kerosene.
Homemade brother ???
Yes home made but some parts done in workshop using lathe machine
Mujhe iske all parts chahiye aap doge mujhe
Fuel pump or starter motor kaha se mangwayi h bada do bhai plz ECU wagera ka bhi
I am starting using compressed air and controlling the engine with fuel flow via pump.
@@TeamRCHyderabad thrust kitna de rha h engine
@@akashrawat3676 Thrust about 4kg.
@@TeamRCHyderabad tq
max thrust??
3kg at the moment
@@TeamRCHyderabad very low need more thrust
fuel pump type ?
Brushless motor pump
hey I am interested your vidio because I am making jet engine at home.
Nice to know. Do post some videos.
Sar please reply to kro
Is it capable of flying ?
It needs some more improvements which is on-going. After that it can. Need to fix starter motor and clutch. Need to also reduce weight.
@@TeamRCHyderabad will it be available for sale ?
@@rohitmaity2529 Engine still not ready . But parts I can.
@@TeamRCHyderabad please complete it soon. It will create a huge sale here. We have have a designing startup. If any requirement of us is there let us know please.
@@TeamRCHyderabad you have all the parts ? I am interested in purchase of guide vane and diffuser
Sar mujhe iske parts chahiye please contact no. Send kro
Sar please contect no. I'm interested in this engine parts
You can whatsapp 9502219200