Farmall IH H4 Magneto Rebuild: Easy Step-by-Step Tutorial Farmall A, B, C, H, M, etc Tractors

Sdílet
Vložit
  • čas přidán 10. 12. 2020
  • Repair tutorial with Rachel Gingell on the International IHC H4 magneto.
    Order Parts here: farmtractorrepair.com/collect...
    Follow Rachel on Facebook: www.Facebook.com/tractorrachel
    Follow J&D Productions on Instagram: janddproductionsinc
    The producers of this free tutorial do not assume any responsibility for accidental injury, death or dismemberment resulting from the performance of any orations detailed in this tutorial. Please be aware of common safety steps--expressed, implied or not expressed.
  • Jak na to + styl

Komentáře • 118

  • @corydriver7634
    @corydriver7634 Před 3 lety +28

    I have almost 40 years instructor experience, both in the military and as a civilian contractor. I have to say your instructional skills are second to none, very impressive. I enjoyed watching the entire video and feel confident I can rebuild a magneto.

  • @ashlyknapp1798
    @ashlyknapp1798 Před 3 lety +31

    The world needs a lot more of your intelligence, empathy and caring. Your videos are of the best quality. best wishes.

  • @ianwille5780
    @ianwille5780 Před 3 lety +4

    There is a really lucky man somewhere that gets to have a beautiful tractor technician like you on his arm to show off to the world

  • @evilsanta3172
    @evilsanta3172 Před 3 lety +1

    This video saved my tractor from being flipped in a valley and forgotten about, thank you

  • @Mike--K
    @Mike--K Před 3 lety +2

    I haven't owned or needed a tractor in nearly 50 years, but after watching a few of your excellent videos, I'm tempted to buy one.

  • @8068
    @8068 Před 3 lety +4

    Good call on the switch. I've seen people rebuild working magnetos only to find, later, that the switch was bad.

  • @icewormwoodworks
    @icewormwoodworks Před rokem +3

    Excellent presentation, thank you both for your time and keeping "fix it " tradition alive in this day of throw it away and buy another one....The biggest Environmental scam today is the "designed obsolescence" practiced by all companies today.

  • @user-lc2tv1dv2e
    @user-lc2tv1dv2e Před 6 měsíci +1

    One amazing lady with top instructor skills

  • @Resto-Rat
    @Resto-Rat Před 5 měsíci

    Beautiful. I also produce a lot of videos on restoration at Resto-Rat. Yours are awesome. And I nice seeing a young lady that is knowledgeable. My daughter and I restored a 1971 Dodge Challenger for her first car. She had 400 hours in an 800 hour build and knows more about cars than most of my car buddies. Very good.

  • @Lucastrujillo59
    @Lucastrujillo59 Před 3 lety +8

    Fantastic tutorial thank you and your dad for all your hard work

  • @Heikki70
    @Heikki70 Před 3 lety +2

    Again, Just excellent stuff and this time without ads. Happy holidays.

  • @dalerichardson5757
    @dalerichardson5757 Před 2 lety

    I just want to say that I love your videos, after a lot of looking I found you guys and love it.
    Also thanks for spending time with emails, and other helpful advice. I won’t shop anywhere else. Thanks again.

  • @davis7959
    @davis7959 Před 3 lety +2

    Thank you for your continued uploads. Nothing quite like working on a bright red tractor during the Christmas season 🎄
    Happy New Year 😉

  • @nikolaistahley2494
    @nikolaistahley2494 Před 11 měsíci

    I watch a lot of how to videos on CZcams and this was probably top 5 best I’ve seen. Helped a lot thank you

  • @delmarbish3926
    @delmarbish3926 Před 2 lety

    Great videos, love those old tractors grew up on a 1946 M and have been sowing wheat with it this week. Best of luck in all that you do!

  • @slimpickins3425
    @slimpickins3425 Před 5 měsíci

    Thanks for your awesome videos! Im dreaming of finding a old Female Cub now that I have some land, and your videos are giving me the knowledge and confidence to maintain it once I find one. I will purchase your book, as I see it is a priceless wealth of knowledge with not only the illustrated maintenance and repair, but a complete history of the Formal line up! Thanks your channel is amazing and I look forward to catching up on all the videos!

  • @alaincote6266
    @alaincote6266 Před 3 lety

    Wow! Very, very impressed by your skills! Amazing! I love these old Farmall tractors - We had a few of them on the farm at home when I was young! Best wishes from Québec - A.

  • @paulprice9397
    @paulprice9397 Před 2 lety +1

    She’s got me wanting to go buy a Farmall tractor just to work on it. So I can buy parts from farmtractorepair Needless to say it would probably never run again after I got done with it.

  • @gwaynel8363
    @gwaynel8363 Před 3 lety

    You are the best at explaining a repair than anyone I've seen. You have inspired me to look for a Cub that I can use in my garden and tinker with. I am actively looking for a Farmall. I'm looking forward to your next video. All the best to you from an old retired contrator. When I growing up we had a 100 then a super A and I also used the 130 quite a bit.

  • @TryAdaptLearn
    @TryAdaptLearn Před 3 lety +4

    Well done, very thorough and great with the with the electrical check procedure.

  • @richardanderson2742
    @richardanderson2742 Před 3 lety +2

    As always, a great video!!! While you deservedly receive many compliments on your natural wholesome beauty, you are first and foremost a very talented instructor and mechanic that remains mindful of the trepidation many have to diving into repairs. I had to sort this repair out on my own with my Cub, which had been parked years before. Since I had never opened up a magneto before, I only had a vague idea of what was inside, much less how/why it functions as it does. This tutorial surely would have saved me hours on the repair, as I’m sure it will do for others when facing a similar. I recently inherited 3 Ford series 600 tractors that have sat for years and apparently vandalized. As such I’m scouring your back catalogues of videos on Fords of that era trying to soak it all up before I have a floor full of parts that I’m only 50/50 on whether I can reassemble. Thank you for all you past, present and future assistance on keeping the old tractors in repair and functional.

  • @dieselpoop
    @dieselpoop Před 3 lety +1

    Amazing job Rachel I'm fixing to take mine off my wd thank you!!

  • @johnsushchyk7933
    @johnsushchyk7933 Před 3 lety +1

    You and your father do excellent work
    God bless all your efforts and hard work
    Thank you all
    Sincerely

  • @philipmichaud9476
    @philipmichaud9476 Před 2 lety

    Rachel, you simply AMAZING. Your videos exceptional 👍👍👍❤️❤️❤️

  • @waltercalvin2626
    @waltercalvin2626 Před 3 lety

    Hey Rachel good job , I've worked on them mags before in the past can be tricky we're great when you didn't have a battery !!

  • @juanjosehernandez9852
    @juanjosehernandez9852 Před 3 lety

    I loved your videos, keep doing many more ... my respects from Chile!!!!!!!

  • @kenlutz5243
    @kenlutz5243 Před rokem

    Fantastic! Thanks so much for your informative video and knowledge sharing.

  • @dosman01302
    @dosman01302 Před 3 lety

    You do good work! Merry Christmas to you and fam!

  • @cw5115
    @cw5115 Před 3 lety

    Very helpful video! You got my order for the parts!

  • @davidkimmel4216
    @davidkimmel4216 Před 6 měsíci

    Great job explaining. Thanks

  • @bourbonbeertractorsandprep9335

    The videos help alot, thanks Rachel!

  • @mikecurtis2585
    @mikecurtis2585 Před 3 lety +1

    Great job very helpful. Thanks 😊!!

  • @scottperry8388
    @scottperry8388 Před 3 lety +2

    Rachel, you're so compelling and interesting you make me want to buy parts kits...and I don't own a Tractor, Farm, or any farm equipment. ;)

  • @georgewallacejr5644
    @georgewallacejr5644 Před 3 lety

    Merry Christmas to y’all from Collinwood Tennessee 🎄🙏🏻🙏🏻🙏🏻

  • @watomb
    @watomb Před 3 lety

    You made that look so easy! Maybe it’s just me but you got 7minutes into the video before you said you might need impact driver. I guess the machine I worked on years ago was just stored outside it’s entire life:). Good video

  • @macgyvery
    @macgyvery Před 3 lety

    You really are one of a kind..

  • @charleshupp2434
    @charleshupp2434 Před 11 měsíci

    Excellent video very helpful

  • @kowalski363
    @kowalski363 Před 3 lety

    Great video. Thank you.

  • @abuabdallahalutiby5161
    @abuabdallahalutiby5161 Před 3 lety +1

    Rachel, you are my mechanics teacher, thanks for the clarification

  • @tyfrank3427
    @tyfrank3427 Před 3 lety

    Great tutorial. I never go that far into them, because it is not usually necessary. I know why you did was to teach how to do it if need be. One thing you may not be aware of, The W-9s and diesel tractors use the H4 magneto but they have a left hand impulse. The impulse is the opposite on them. That's why the hydraulic pump on the gas 400 and 450 have the opposite ports to their diesel counterparts, because the gas tractors and diesels rotate in opposite directions.

  • @redhawk4859
    @redhawk4859 Před 3 lety

    Great job

  • @fergalhalpin8023
    @fergalhalpin8023 Před 3 lety +1

    Hi hello how r u i just found ur channel great videos keep up good work

  • @Wheelloader__
    @Wheelloader__ Před 3 lety

    You are like the Taylor Swift of tractors. Awesome video.

  • @davemunday2652
    @davemunday2652 Před rokem

    Very educational

  • @garlandhenry6792
    @garlandhenry6792 Před 3 lety

    Good job

  • @aminman4897
    @aminman4897 Před 3 lety

    So lovely

  • @normandboileau5308
    @normandboileau5308 Před 3 lety

    From québec you are very expérimenté tank you

  • @rickrickman5277
    @rickrickman5277 Před 2 lety

    Excellent video. Give yourself a pat on the back

  • @edpickering8075
    @edpickering8075 Před rokem

    Thank you.......

  • @garyritterstrings
    @garyritterstrings Před 3 lety

    very nice

  • @scott6052
    @scott6052 Před 3 lety

    Good job. Make some videos working on some orange or green tractors. Hydraulic pump on WD45 would be a good one.

  • @user-st1dl7vm4o
    @user-st1dl7vm4o Před 3 lety

    thanks 💚

  • @jefferystrange7476
    @jefferystrange7476 Před rokem

    Hey Rachel. Thanks for all the detailed instructional videos. Im restoring my grandpas super a. Ive rebuilt the distributor and am struggling to understand the timing procedure. Do y'all have a video on that subject? Thanks

  • @xhefriguitars7946
    @xhefriguitars7946 Před 3 lety

    Great job! You are really easy to understand. Question: I just converted my old TD9 International dozer from a coil based spark to a magneto. Very easy change over. You might know that these start on gas and then run on diesel all on the same engine. Is there a problem with not using the ground kill wire on the magneto? I mean, it switched over to the injector pump and when I kill the motor I just shut down the injector pump. So is there any harm in letting the magneto spark all the time even though I am not running on gas?

  • @giddyoketch54
    @giddyoketch54 Před 3 lety

    Hi Rachel i have been following your videos for quite a while,i cant imagine how much time you put on offering some detailed tutorials on farm machinery,i bought a lamborghini premium 1060 tractor ,it has some hydraulic problem the three point lift would come down after lifting,one cannot see any fluid leaking but it looses its position overnight,its weak in lifting as well,kindly i need some details guidlines on how to fix this problem thanks in advance

  • @howardmcadams3852
    @howardmcadams3852 Před 3 lety

    Thanks

  • @TheHamadanners
    @TheHamadanners Před 3 lety

    awsome

  • @conradbegin9505
    @conradbegin9505 Před 3 lety

    excellent video do you have one on the cub also?

  • @juzbond
    @juzbond Před 3 lety

    Greatings from Poland :) I like this Channel because i love old tractors. Especially this small.. Small size and power such a Ford Golden Jubile. I olso a great fan a Ursus tractors - this are polish tractor. Couple of this tractors were testing in tractor Institute in Nebraska. It was Ursus c325, c328 and c335. Im wondering-do you have any of this tractors near by to you? Maybe you repearing someday a Ursus model :)

  • @stevemcdermott6684
    @stevemcdermott6684 Před 3 lety

    I was always told the heart and soul of a magneto is strong magnets you can put in every thing else brand new and it still won't be to good with weak magnets

  • @ethanbouchier6180
    @ethanbouchier6180 Před 3 lety

    Love your videos, very helpful, do you ship parts to the uk?

  • @monjuislam3816
    @monjuislam3816 Před 3 lety

    Please give a video on the repair of the combined harvester.

  • @irvinwittmeier5208
    @irvinwittmeier5208 Před 3 lety

    Nice !;-)

  • @odebain1
    @odebain1 Před 3 lety

    j'adore 🔨🔧🔨🔧🚜🚜🚜🚜🚜

  • @tonyborgman9857
    @tonyborgman9857 Před rokem

    Just a tip. If your points are burnt the condenser should be replaced.

  • @ronmurphy9819
    @ronmurphy9819 Před 2 lety

    I like this. I have at least one question, my question is do you have John Deere parts also? I like the model A’s and B’s with the hand start. I like spinning that flywheel and running around closing the cylinder bleeds. Thanks for your time. Take Care

  • @elroyborchert6944
    @elroyborchert6944 Před 2 lety

    So when setting points is the high lobe on either side of radius or is one side of radius sit a little taller than the other?

  • @brentbarnhart5827
    @brentbarnhart5827 Před rokem

    In order to get the impulse off, you MAY, need to hold the shaft from the SMALL END, with your adjustable wrench, or it will just turn and turn while you try and loosen the nut.

  • @meganblack1841
    @meganblack1841 Před 2 lety

    I have never used a meter of any kind before; is there a certain setting the meter reader should be on to check the switch? Mine has DCV, ACV, DCA, and OHM settings.

  • @timothykoller5210
    @timothykoller5210 Před 2 lety

    Hi what engine oil do you recommend for a farmall m in cold temperatures?

  • @benburkett4222
    @benburkett4222 Před 3 lety

    I have a 51 Harry Ferguson to-30 and i have replaced condenser,coil,cleaned the points well ,replaced all plugs and it has been converted to 12v and I turn the ignition on the coil gets warm but it won’t spark what is wrong I have a distributor btw

  • @BJNich78
    @BJNich78 Před 2 lety

    How similar are the impulse couplings between the H4 & the J4?

  • @nadermod
    @nadermod Před 3 lety

    Merry Christmas i have a question there is a Ford 8340 4 × 4 there is a problem with the hydraulic pump according to the seller Wheels 70% 4 × 4 Not working Could be pump delay or Solonid is it worth it to buy easy to fix or not

  • @jonasstelzl1112
    @jonasstelzl1112 Před 3 lety

    this is a dream of every man, beautiful woman and a tractor, just need the beer

  • @plcreman
    @plcreman Před 3 lety +1

    When checking the switch for continuity, be aware that some meters beep with any reading below 50 ohms and other meters below 100 ohms. You should also look at the meter and verify you are reading below 1 ohm. Your probes and the connection to the switch may add 1 maybe 2 ohms. The beep just tells you there is"some" current flow..

    • @plcreman
      @plcreman Před 3 lety

      @Todd Orton Yes that or just read the resistance on the ohm meter.. We change and throw away plenty of relays that have contacts of 2 or 3 ohms because they won't start a motor or because of the contact resistance they heat up and start melting the case. With a switch you may be able to shoot some contact cleaner in there and get it to work for a bit.. (if you can get the solvent into the switch).

    • @albertgale8254
      @albertgale8254 Před 2 lety

      @@plcreman 0

    • @albertgale8254
      @albertgale8254 Před 2 lety

      Need to know where I can purchase parts for my Farmal A magneto.

    • @erik_dk842
      @erik_dk842 Před 2 lety

      A test light is the best way to test connections.

  • @allendurkey9409
    @allendurkey9409 Před 6 měsíci

    Can you put a coil on in place of a mag

  • @user-xf7yg3kz6o
    @user-xf7yg3kz6o Před 8 měsíci

    Could really use a video on an IH 666 gas. Looking to do a complete restoration on it.

  • @jkochosc
    @jkochosc Před rokem

    Can you do this same video but for a J4 series?

  • @tmiklos4
    @tmiklos4 Před 3 lety

    My h4 was converted to external coil . The original coil was removed. I would like to return it to magneto. My question is:. What is special about the core. I don't have a core for the coil. Can I make one on the lathe? For now I am using it will the external coil but would love to go back to original.

  • @sallysilva3121
    @sallysilva3121 Před 4 měsíci

    Can you do a video of an H governor

  • @elbertpearsall1936
    @elbertpearsall1936 Před 2 lety

    Farmall pulling hard to the right how is the set up alignment?

  • @KrazyKajun602
    @KrazyKajun602 Před rokem

    Does anyone know where one can purchase rebuilt tractors like model Super A?

  • @timothykoller5210
    @timothykoller5210 Před rokem

    Can you get new impulse drives looks sold out?

  • @robertnieforth9312
    @robertnieforth9312 Před 3 lety

    Rachel do you ship parts to Canada?

  • @RBFR01
    @RBFR01 Před 2 lety

    what's the difference between a magneto and a distributer?

  • @matthewheironimus1643
    @matthewheironimus1643 Před 2 lety

    I cannot get the impulse off at all. one broke with a puller and the other one is stuck as well. the screwdrivers or pry bars aren't working

  • @maxoutone1954
    @maxoutone1954 Před 2 lety

    Would like to see a mag rebuild on a F20

  • @Laurel-Crowned
    @Laurel-Crowned Před 3 lety

    WOW! 😍 You can work on my H 🚜 anytime 😉 and I don't let ANYONE under my hoods

  • @ronaldkearn3322
    @ronaldkearn3322 Před 3 lety +1

    YOU are a Genius!!! Just love you. >:-) :-) :-)

  • @1crazynordlander
    @1crazynordlander Před 3 lety

    I always hated trying to shut off our H Farmall if it was a little wet out. I would go to push the kill switch in and get a good shock. We replaced our mags with Delco Remy distributors. We weren't purists.

    • @tyfrank3427
      @tyfrank3427 Před 3 lety

      If the switch is worn, it can tickle you. when you shut the tractor off. Delco Remy distributors were optional. I am fine with either. If you had a good switch, you wouldn't get tickled.

  • @edwardholden9911
    @edwardholden9911 Před 4 měsíci

    Looking for a inpluse housing I broke it

  • @bryancmcdonald3978
    @bryancmcdonald3978 Před rokem +1

    🚜💕💨

    • @bryancmcdonald3978
      @bryancmcdonald3978 Před rokem

      My Dad's brother was just start putting parts in a line then follow the parts back.
      =====
      I would kick them everywhere I did that . Your gears I dropped the distributor in completely 180 on a 71 Chevy and they said it worked just as good at Sears. ( But No )

    • @bryancmcdonald3978
      @bryancmcdonald3978 Před rokem

      Are in propane didn't have a magneto but a case tractor 🚜 did. I never touch the propane much .
      =====
      They had a filter that was all it needed at tractor supply ( I cleaned )
      ====
      It has a John Deere needle valve in it means it the other one hopped off and ran away with the moon or spoon 🥄 but a little Teflon and it runs good. You can't buy another needle valve cuz they say you don't need one

  • @JuanrubenAcosta
    @JuanrubenAcosta Před měsícem

    Hola

  • @paulbrooks2024
    @paulbrooks2024 Před 2 lety

    Timing those farmalls is important when hand cranking, one good kick and you will be gun shy ,all ways wandering,

  • @JuanrubenAcosta
    @JuanrubenAcosta Před měsícem

    Necesito convertidor un Magento conventional a uno electrónico

  • @chipdoctorkent
    @chipdoctorkent Před 2 lety

    I found my first celebrity crush

  • @martinsuper4545
    @martinsuper4545 Před 3 lety

    At 14:26 the hair went up and for some reason it shocked me.

  • @mattfoley4128
    @mattfoley4128 Před 3 lety

    Rachel is too pretty to concentrate on what she is saying😍😍😍😍😍

  • @duanebolen8359
    @duanebolen8359 Před 3 lety

    Why didn’t you mark the mag so that you could put it in the right timing I have seen Tractors have dots with the center punch so that they get put back in the same place

  • @albertgale8254
    @albertgale8254 Před 2 lety

    ,