5:00 how do you grind cylinder head and cylinder body, do you use machine to grind them or some simple tools? is possible show us on a video how to do it for N47 Engine
Diesel pump sprocket was not timed correctly, the mark on the block and the line on the sprocket need to line up with that locking tool is locked at 15degrees past TDC.
![순덕 게러지 Swndug [sun:dʌk] GARAGE](http://yt3.ggpht.com/3Y7PUHCeZhZZNqdCnLOBMp8X5OShqDGeEnYTdokRmW-6UQi5r6icAUf6bi_n6ipujD5umBId8w=s48-c-k-c0x00ffffff-no-rj)
Must be so nice working on a clean engine I envy you 😂
Hi can you put the bolt torque settings for the n47d20a engine would be great thanks
Oil pan has torque pattern too, head bolts are torque , angle angle . But not bad
Why don,t you use the crankcase gasket ?
can you guide me to install the piston ring?
기본에 충실한 좋은 영상이네요.
토크값이나 각도값.을 표시나 음성 수아로도 해주시면 더 좋은 영상이 될듯 하네요.
감사합니다~
5:00 how do you grind cylinder head and cylinder body, do you use machine to grind them or some simple tools? is possible show us on a video how to do it for N47 Engine
You mean making it a flat surface again?
@@wesley8096 yes
helllo
Diesel pump sprocket was not timed correctly, the mark on the block and the line on the sprocket need to line up with that locking tool is locked at 15degrees past TDC.
The desiel pump? Surely it doesn't hatter if that's in time as long as the cams and crank are right?
Bonjour cv couple de serrage bielle motor bmw 325d N47 merci
Man makes it seem all too easy man can rebuild his dreams if he wanted to 😂
thank you ~!