How to Replace Blend Door Actuator 2006-10 Ford Explorer
Vložit
- čas přidán 25. 08. 2024
- Buy Now!
New Temperature Blend Door Actuator from 1AAuto.com 1aau.to/ia/1AHC...
The temperature blend door actuator is the electric motor that is responsible for physically opening and closing the blend doors in your vehicle's HVAC system. If the actuator isn't working, then you won't be able to control the temperature of the air coming out of the vents! This video shows you how to install a new blend door actuator on your 2006-2010 Ford Explorer.
• Check here for more videos on the 2006-2010 Ford Explorer • Ford Explorer 2006-201...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
Great video! I have seen others that remove the center console and a bunch of other unnecessary components. I just did this repair to my wife’s 2007 Eddie Bauer Explorer and there is no more clicking noise and the heat works again! Thank you so much for this video!
I’m glad I came across this video it looks much easier than another one that I viewed. The other video has you take out the entire console. Thanks for the information.
If the plastic pin doesn’t fit immediately, one thing I found that works is plugging the actuator in but not installing it and turning the key to the on position so you can turn the temperature gauge, in turn, spinning the pin
Will definitely be showing this to my son who is the one that's going to be replacing that part, thank you
Dude, you are awesome. This is way better than some of the other videos that take the while center console out, stereo and all.... I appreciate the video, thank you.
If at first it doesn't come off, check for a 3rd bolt on the side facing the rear of the car. Thanks for the video.
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts
√ *Do it Yourself*
√ *Save Money*
This helped a bunch! Thank you! This deserves more views
Super helpful thanks dude! Way eaiser then I thought it would be.
I took my actuator out took it apart there was no gears damaged I cleaned the contactor inside that quarter turns it had thick grease on it and bent the contacts up a little bit works like new . Save quite a few dollars fixed it in an hour only took off one cover
+@rs2143 Thanks for the feedback! 1aau.to/m/Shop-TRQ
This is great but how are you supposed to get to the passenger side one for a dual control system? This video is very helpful, though. Thanks!
Wow, what a difference one year makes!
Perfectly helpful!! Thank you!!
Great video you make it look easy 👍
How did you get the cover next to the radio off?
Does this fix the cold air? Because right now it’s just blowing hot air and I was told to replace this.
There's a 3rd bolt on my 2006. You have to take a little more out to get to it.
Worked on my 2007 explorer sport trac limited v8
My Mechanic Says My Blend BOX Needs Replacement, And I Can't Find ANY Videos On Replacing The Box , Or Even A Picture Of It.
Mechanic Say's It's Discontinued, Any Ideas?
Thank you! 😊
I see some familiar faces on this channel. Is it same group of people from 1A Auto?
The 2 screws that are removed at the 1:15 mark, are completely unnecessary to remove.
Thanks for the vedio
Did all this on my 2010 Explorer Limited and the Actuator is not under the steering column.... also missing a few steps?
I did this because the heat wasn’t working it was broken but now that I have changed it I have heat but no ac
I replaced mine because it wasn't blowing hot air only cold air and now is blowing hot air only any ideas ?
Low on antifreeze could be one
whoose we😁
Where is actuator door on passenger side. No videos
Ac acruator