Vložit
- čas přidán 26. 03. 2021
- #TL866 #TL866II
IC-Tester go.tonyalbus.com/ictest_A
TL866II Plus go.tonyalbus.com/tl866_A
TL866II Plus go.tonyalbus.com/tl866pl_amz
GQ-4x4 go.tonyalbus.com/GQ4x4_amz
GQ-4x4 go.tonyalbus.com/GQ4x4_Ali
EPROM Erase go.tonyalbus.com/ewipe
TL866IIPlus1080.zip: www.tonyplaza.nl/download/YT1...
Tshirt 2BeOrNot go.tonyalbus.com/ts2be
Links provides by viewers: (thanks Kai)
proghq.org/wiki/index.php/TL8...
proghq.org/wiki/images/3/3c/T... - Věda a technologie
Just got mine a couple weeks ago. Havent even tried it yet :) Cheers
Great!! hope you have fun with it....whole installation was very smooth...
Received my Xgpro TL866II Plus yesterday and was unsure how to install it until I watched your video. Your instructions helped me to get it to work so I'm now a happy bunny!!. One problem I had was that the screen was nothing like yours, but then realized that my software was version 8 and yours was 10.8. I Googled 'Xgpro TL866II Plus latest software' and downloaded xgproV1100_setup which when installed, matches yours. Thanks very much for taking the time to upload your excellent video, I'm really pleased with the device and can now blow my BBC Micro ROMS.
Thank you for your message, glad it all worked out and i could help. Have fun programming!
Thanks Tony. I am following Ben Eater and his series on 6802 microprocessor and I bought the tl866 from him, but going to the manufacturer site to get the software they say it’s been archived, so if it wasn’t for your good self I wouldn’t be able to get the software. Thanks very much
Thank you and you are welcome, here you do find the latest, still maintained it looks: www.xgecu.com/EN/Download.html
Excellent! It arrived quickly.
Just programmed a few PIC microcontrollers on mine tonight.
Thanks, Yes very fast indeed.. i am very lucky with delivery last weeks. great advice Stephen, Thanks, it is very nice.
i need to play more... i did not program any eproms or pic(did not excist yet) for the last 25 years...
Thank you so much.
I was checking around and found a new version called T56 and it support a wider range of IC.
You are welcome, yes T56 is also there, i have no experiace with it.
@@TonyAlbusI have one here. T56 has ZIF48 socket and can support many more chips including TSOP56 and NAND. It also supports older EPROMs that require 25V program voltage. However there are still a lot of missing chips and/or software bugs. This is why I have 10 EPROM programmers ^_^
How or where can I download more IC binary files, so that I can test more ICs then are currently listed. Like some of the older ones, that are no longer listed.
The older ones not in the list, could also have an higher programming voltage, this one only goes upto 18 Volts, the older need 21 or 25 or more. i also have an GQ4x4 / GQ4x v4 , i will show later.. that one can program older EPROMS too.
Hi Tony,
I've had a TL866II Plus for several months and I like it.
I'm not surprised that you could read a TMS2764 but you know of course that to be programmed, according to the TI datasheet it needs a Vpp of 21V? The TL866II Plus sets it to 18V, which is its maximum. Did you know that and did you try writing the 2764?
The Vpp max of 18V is one of the few disadvantages of the TL866II Plus over its predecessors, the TLS866A and TLS866CS.
Yes you are correct Raymond, i meight need an older one too... or get my Commodore C64 back running with that programmer i used that time.
I did see a video. with one making a voltage socket, in between adaptor for it. and it worked just fine. with 21 and 25v :) think I found one of the videos. he is using a 9v battery to raise voltage :) czcams.com/video/IpQ3w7sMOYo/video.html
Interesting! thanks
Could someone please help clarify for me how to successfully "test clip" program a soldered Macronix MX25L4006E SOP8 and a Winbond W25Q128JV SOIC8 chip both on the same TYAN S5545AG2NR-HE "secure flash" model motherboard using this XGecu T56? I understand that this model needs custom "crossover" wiring from the ICSP to the clip and proper grounding and whatnot and the diagram which comes up in the XGecuPro Software v1266A for each module to explain the "in-circuit" custom ICSP pinout is not clear at all to me concerning how this test clip should be wired for a successful chip pin connection. I bought this for work for this particular time-pressing project I'm working on and cannot make heads or tails of how I'm supposed to wire this ICSP to test clip for these two model chips. This T56 is literally worthless to me if I cannot get this sorted out. My simple Coright Skypro is much easier to use than this device -- it literally autosenses all modules and senses with successful programming many SOIC/SOP-8/16 soldered "in-circuit" chips with POMONA or 3M Test Clips with little struggle. Admittedly my handy Magnifying Lamp is a huge help in getting solid clip commections and minimizing destroying clips too quickly, but this soldered Macronix MX25L4006E on the TYAN S5545AG2NR-HE "secure flash" model motherboard is not reading or writing correctly at all. I've ruined 3 total clips struggling before realizing the chip needs a custom wiring for a successful ICSP connection. The problem is what exactly that 8 pin wired schematic looks like. I've messaged the XGecu and posted on their message board with zero response. If you boast in-circuit programming concerning your programming product, you shouldn't make the instructions impossible to sort out. This is extremely frustrating. Can someone help me out with this "in-circuit 8-pin SOP pinout ICSP connector to Ponoma test clip" please?
Thanks for your question, hopefully some of the viewers understand, for me its too specific and have no experciance with that
I have those programmer too.. But why it can't erase my chip? Do I need those EPROMs eraser to do that? My eprom chip is 24c16n
i am not sure it is supported, for normal eprons i use : EPROM Erase go.tonyalbus.com/ewipe
but yours don't seem to have a window in it.
Cant get the driver to install properly. Setup says driver is installed but device manager says cannot start error code 10
thank you for your feedback, best to contact the helpdesk of the company of the device.
i am new to the field and use the same programmer. I'm trying to load 93c66 and it's saying: ERROR! CODE Address: 0x000000 Buf_Val:0x71 IC_Val:0x06 have you been through this? do you know how to solve?
Hi Gera, i have not had that before, what you can do is.
1. make sure the IC is supported by looking at the compatability list
2. make sure you have the latest software and firmware of the prog. device.
3. make sure the IC is not broken
4. If you checked 1,2 and 3 contact you seller or the manufactor
Do you know any websites,where we can download dumps,for various electronic devices,like smart TV's and similar? I cannot write that code myself,I am not there yet,but it would help with my repair shop business.
Thank you
Not sure there is such a website. i would start looking at the service page of a specific brand or send an email to them.
@@TonyAlbus Hey, thanks for replying. I just thought there might be forum or a place where people share those.
@@adnan4688 If you found one, please reply back to me, i can add it to the description of the video.
@@TonyAlbus Sure man,I will keep that in mind,and if I find something I will let you know.
I think it will be difficult to find that because it would be copyright software so you would need to host it in China or Russia. 😁
The logic chip testing functions of that programmer software are copied directly from other s/w and contain the same bugs or omissions. If you really want to test logic chips more thoroughly or test chips not supported by that programmer you should get a Retro Chip Tester Pro. This device is a game changer :-)
Thanks! .. good to know
hi can i burn eprom M27c256b with tl866II plus ?
This one is better for older eproms: czcams.com/video/eDMmNOoyaxk/video.html
hm that is a great feature of that programmer, offcourse i have a totally different programmer(vs4000+ i believe) and now you got me wondering if mine can doe simular testing of logic chips lol Thanks for the video Tony!
Thank you Leo! yes indeed very interesting.. who knows, it can.. cool luck testing that!.. Tony
@@TonyAlbus ha I didn't know but yes the vs4000+ (yes I ordered the plus version also lol never used any of those weird adapters) can indeed do logic testing as well
@@mrbambix Cool! who would have thought!! Great!.
Kan de vs4000 wel 21 en 25 Volt vpp? uit de specs die ik kan vinden , wordt ik dat er niet wijs uit.
@@TonyAlbus poeh geen idee eigenlijk ik gebruik hem eigenlijk alleen bom eeproms te branden op stand vol automatisch 😁
Sir can u plz do the video on universal programmer top2013 ?
Hello Imran, i don't have that programmer yet, i do have the GQ-4x4 which i will show later.
Hi.mr.tony albus.
How to read hd64f3048f16 programing. Can you help me. Thank you
Hello, all the chips that is supports, are here: www.xgecu.com/MiniPro/TL866II_List.txt
And i found someone elso looking for it, maybe keep an eye on this forum: mhhauto.com/Thread-Programmer-for-HD64F3048F16-ou-F3048F16?pid=1454301#pid1454301
@@TonyAlbusmicrocontrollers are used specifically because they contain ram, rom and cpu all in one package. the code is protected and it is a waste of time trying to read a microcontroller. often when trying to read it the chip will self-destruct on purpose. do not try to read a microcontroller that is important because you will be very sorry when it suicides and the device it came from is then scrap ;-)
Can this do write flash?
Ik one of the links is i think a list of supported chips, if flash is not supportded, have a look at the GQ-4x4 that has a bigger support list.
Sir I want to help for programming sir I have save the data but 25% data save not 100% so what can I do
Him if you selected the correct Eprom and it still fails, try programming on lower speed. by default it is not on the lowest speed.
Bisa untuk tes ic apa saja ya,terima kasih
Yes i think it can if i remember correct. i do show it in the video or mention it if it can.
interesante
gracias
@@TonyAlbus speak spanish?
@@dieguitomonardez6826 muy poco
@@TonyAlbus interesante.
Is it support windows 11?
Just checked on the website but i don't see it there. but when it works on Win10 i think it will be on 11 also
@@TonyAlbus Thank you
Interesting link to CuriousMarc, where he has just uploaded a video where he tests one of these in line with another that can actually give you logic level voltages etc: czcams.com/video/gqbXM48bbOs/video.html
Thank you Stephen, very interesting!
Good thing, many thanks.
(On my own behalf; for viewers like my which have not English as their native language, you are accustically not very good to understand in your videos. You may have a heavy dutch accent and a special voice - for which you can not do anything. But you could compensate for this by speaking more slowly.)
Thank you Roman, specialy for non-natives, CZcams made an [CC] button, this will give you sub-titles and you can also read and maybe understand better.