Putting a big diesel engine in my krusty old lobster boat
Vložit
- čas přidán 23. 01. 2024
- The first 500 people to use my link will receive a one month free trial of Skillshare skl.sh/petersripol01241
Thanks for the help!
@SamFoskuhl
Seaboard Marine for helping with my Diesel Engine questions and supplying some upgrades and parts
www.sbmar.com
Part 1 and Part 2 of the Krusty Shrimp Boat repair:
• I bought A Krusty old ...
▶▶ Support on Patreon: / petersripol
INSTAGRAM: / petersripol
TWITTER: / petersripol
Amazon affiliate links (these help grow the channel, every purchase gets me a small percentage of the sale, it costs you nothing though!)
Here's some stuff I use in most of my videos:
3D Printers:
▶ CREALITY Ender 3 - shorturl.at/iADO2
▶ LulzBot - shorturl.at/adIJ9
Drones I Like to use:
▶ DJI Mini 3 Pro - shorturl.at/pDMNY
▶ DJI FPV Combo - shorturl.at/gC178
▶ Other DJI Gear - shorturl.at/biC79
Camera Gear I film with:
▶ Main Camera - shorturl.at/aeAZ8
▶ Backup Camera - shorturl.at/ftAE7
▶ Lens - shorturl.at/gzBEO
▶ Camera Mic - shorturl.at/uDIU9
▶ GoPro - shorturl.at/qrAE5
▶ GoPro Max 360 - shorturl.at/dmost
▶ Insta 360 Go2 Cam - shorturl.at/abLOU
▶ DJI Osmo Pocket - shorturl.at/xyJS8
▶ Switchpod Tripod - shorturl.at/dzAIU
Some other great products:
▶ Total Boat Epoxy and Supplies - shorturl.at/ptGT7
▶ Battle Born Batteries - shorturl.at/lmY56
DISCLAIMER:
This video is purely for entertainment value, any and all replications of any experiments, projects, and creations or similar are the sole legal responsibility of the person(s) involved in replicating them. PSproject can not be liable for any information or misinformation, wrongful use, damage to personal property, death or any circumstances that result from replication of any projects seen.
Be safe and use your head people! - Věda a technologie
In this video Peter learns the true meaning of BOAT
Break Out Another Thousand
or the classic. a boat is a hole in the ocean you pour money into. XD
looks great tho :)
Two best days of a boat owner’s life..
I guess for Peter the third happiest days are when videos are published.
Only if you are stupid. He could have stuck an automotive turbodiesel in instead and spent less than a grand, had more horsepower, and far less weight. That thing may not even get that boat on the plane, with its pork, and not enough HP at hull speed rpm to get out of the hole.
@@Maungateiteithat's for folks that do stuff like this. Folks familiar with how to marinize it or run it on a closed loop cooling system.
But buying a decent Cummins sure isn't happening for a grand.
@@goosenotmaverick1156 Yeah and look at this motor, probably has more power than the obsolete "chuff chuff chuff chuff" affair that Peter pulled out of the boat.
I've kept my eyes on the market because I've been wanting to Cummins swap a Nissan Patrol. Even automotive Cummins motors are extremely expensive because of the CZcams hype.
Then for marine use you need to rebuild it for reliability, last thing that fails has to be your engine.
Ocean travel is more perilous than let on, especially to those who haven't informed themselves and with no experience.
Dude canceled his health insurance to get a boat engine 💀
Gotta love America, where you can either have a boat or health insurance.
The weird part is that the original driveline would have run forever for zero dollars. I guess maybe it's worth it for the views? Will a shiny sorta-new crate motor get more views? Mind blowing to me...
@@privateparty4900 iirc it was either efficiency or the fact that its an old Penta motor, so parts availability might be harder to get.
@@abhimaanmayadam5713 plus that old driveshaft was trash, along with all the other issues that needed fixing. That boat wasn't running anywhere lol
@@Sun-ut9gr I was about to ask if the motor was super screwed up but I didn't want to go through the old video. I do remember that the driveshaft was absolutely munted.
Too late for you, but for anyone else doing a job like this, consider using an Aquadrive coupling. It's basically a short piece of shaft with a CV joint on each end; something like a front wheel drive car axle. It allows for a significant difference in the alignment of the engine and prop shaft and offers several benefits. You can mount the engine on very soft mounts to reduce vibration without worry that you will damage the prop shaft stuffing box because of excessive movement. And you can mount the engine more level even if your prop shaft is not perfectly level. But the best advantage is that you can mount a thrust bearing on an intermediate bulkhead so that the prop thrust loads are taken by a dedicated thrust bearing and that eliminates the driving thrust being transferred into your expensive transmission, saving wear and tear. They're not overly expensive either.
That second to last sentence brought be back to drivers ed when the teacher told us to always engage the parking break before you pull your foot off the breaks so the shifting weight of the car doesn't rest on your transaxle pin and wear it out over time. Bigger problem on older automatics apparently.
The downside to all that is that you are adding more points of failure which is not good on a single engined boat.
@@popuptoaster Boats are points of failure. One must accept that as a reality of maritime life.
Yea what the guy said 😂 hes right ya know
@@SetitesTechAdventures well... less PoF's (Points of Failure) is always a benefit 'cuz , like u said , boats are a giant point of failure but the thing is ; the hull is a SECONDARY PoF , MOST OF THE TİME , meaning u need smth bad to happen , for the hull to fail! of course the hull itself might fail on its own but its a very low chance , therefore , having less PRİMARY PoF's (meaning these PoF's are more likely to go off on their own) is a prime benefit
Also im not saying your wrong , its just "constructive critisizim" (i actualy dont have a word to explain what this comment is as its an explanation/critisizim for someones logic so ... uhh ... idk i guess)
I know this is a huge project but I'm all about it. You're doing such a good job and making that boat look so salty. I can't wait until it's finished.
You need an electrical engineer and a failed mythbuster to help you.
Who????
@@martygibsonsr5150Allen pan and William Osman
@@martygibsonsr5150failed myth guy = Allen Pan, other guy idk william osman maybe? Thought he was mechanical engineer tho
Yesssss we need that collab
@@kob8082osman is mechanical and electrical engineer,
I wouldn't mind having longer videos. Really enjoying the project. :)
I would be totally okay with longer videos as well.
Same
It's a shame that longer, more detailed videos are going the way of the newspaper. People want instant gratification, not the opportunity to learn. Hence shorts and tiktok. Nothing against that in moderation, sometimes it's fun, but it should be balanced. I wish there was more detail, longer videos.
16:05 i would recommend you get some heat shield's on the exposed exhaust pipe & a exhaust flapper for the end of the pipe so when it isn't running it won't hydrolock since it's not going to be run every day of the year
I work for a company that makes removable insulation blankets for exactly that purpose (among others). They also keep you from burning yourself.
My great grandfather who was a mech engineer did something very similar to the project you’ve undertaken (not a lobster boat, but a fishing boat with similar beam and draft, wanna say about 38 ft LOA). Finishing it was an absolute money pit, and so was maintaining it. Instead of getting a fancy car and a big house, he put his cash into the boat. I’m sure to some it was a questionable life decision, but even in the decade after he passed, everyone in the family still reminisces about the time they spent on it and the countless memories they made. TLDR, it might be a pain in the ass and wallet, but it’ll bring value in other ways.
Happy you could update us on the project, keep it up Peter!
That's one reason I don't mind my $5k covered slip lease payment and my $40k Searay Sundacer 310. It's a lot of money to operate and maintain, but the memories are priceless.
I love seeing Sam help out, always one of my favorites to see in your videos.
I always enjoy being able to help out 👍
This is, by far, my favorite build series on youtube. So fun seeing the progress. Well done!
very nice setup. it is odd to be that primitive to be that precise. I worked on a lobster boat. novy fat beam. The shaft wobbled like a jump rope, the engine from a japanese tractor trailer..straight pipe to the sky... over 100db right next to us. Keep on truckin.
Dude, from toy planes, to toy boats, to this very cool real boat. You've come a ways! Proud of you! 👍👍🤠
Dude you changed this boat completely in the absolute best way! it looks soo freaking good!! i can't wait to see it in the water, also that motor is badass! and sick work with the alignment, i bet your motor is a lot more in line than most boats that'll be in the water
When replacing old wood. Paint new wood before installing, then paint again and seal up cracks and seams after the install.
This way, if the old wood you left behind has any trace of rot, the new wood will be unaffected.
Also, protects the wood from moisture you can't see.
Im jealous!! The diesel motor sounds great and the agressive look of the pilot house is how it should have been built in the first place! Please hurry with the launch video
This is easily my favorite project out of your channel so far. Really looking forward to seeing it again in a few months.
I spent a couple of years dreaming of buying and fixing up a lobster boat. Congratulations! You’ve permanently cured me of my obsession!!!
be careful with your diesel heater exhaust you might want to find a more horizontal mounting method those mufflers have a drip hole for condensation on the bottom of them just to let you know! Loving the boat
oh are you thinking he might flood the engine if it rains? i suppose if it comes straight from the turbo.
Great job on that precision fit! Maybe it is beyond the normal spec, but it can't hurt!
And then the whole hull flexes when it goes in the water.
I love this new boat series!
I think you really should have a marine exhaust, they're so much better for fumes noise heat and vibration, also the water cooling down the exhaust also cools down the exhaust gas, which acts like a vacuum effect shrinking of the gas helps boost and fuel efficiency, air exhausts are so intrusive and always interrupt conversations lol, when you're trying to have a quiet cruise, what an excellent job, my brother is a boat builder Annapolis from New Zealand, and he also loves overkill, good on you and thanks for sharing your very professional experience.
Yay return of the best series
BOAT stands for: Bust Out Another Thousand. Boats are not cheap to fix and maintain.
Dude's learning the golden rule of owning a boat. Your only happy days are the first day you buy it, and the day you sell it😂
Hi, 8 dont know if you realise but you have aligned the engine to the prop shaft but you will need to do it again after the boat goes in the water as the hull shape will change between propped up on its keel on land and floating in the water , just a heads up, great job so far.
Very true for most wooden boats we work on. The glass or metal ones not as much but we still check after it splashes back in.
@@usanaluoma ... did you just confirm that glass boats exist?
@@akidafloof fiberglass i assume but yee, glass boat indeed
Yup, and let's see him do that with a laser shining out of the back..
The cooling system on these is pretty cool. You've got coolant that cools the "jacket" in the engine (engine block and other heat sensitive engine stuff) the raw water pump sucks seawater through a strainer (to protect the pump and jacket water system from sea junk/trash) and goes through a liquid to liquid heat exchanger that keeps the coolant and raw water seperate. The raw also cools your intake air. The boats I worked with ran two of these engines rated at 425hp and I spent 5 years working with them 😅
I work at a smaller fab shop and just wanted to say that was a really good “first” weld on a ladder out of position like that…props to you
That's awesome! Good work! The only thing I could recommend is a air cutoff for the motor intake! Can prevent a runaway from destroying the motor. $200 can save you a $20,000 repair!
And possibly exhaust blocker. Double is better. Als the air cutoff needs to be extremely solid to resist runaways
Four cycle engine. Run away very unlikely.
That alignment of the motor. -chef's kiss-
Hey man great progress so far. Just be careful running the engine out of the water if you have the sea water pump fitted, you can do it with a hose connected otherwise the impeller will get trashed, they are rubber and need the water for lubrication. When you do get round to putting her in the water keep an impeller in a bag near the engine with some tools, sometimes the pump will suck up things like trash bags or the strainer will get blocked with silt causing the impeller to lose water and fail, the first you will probably know is when your engine overheats and then cuts out. It’s useful to be able to change one quickly to keep you out of brown town. Fair sailing
13:26 He says the water pump was disconnected during the testing
I love boats and i have always been fascinated with doing rebuilds/ remodels of older boats and you went above and beyond! Congratulations on such a wonderful boat!!
Opening a cardboard box with a sawzall is something I've only seen Peter do 😂
Its been long awaited! Im glad its working
The re use of the laser bore sight 👌
Hey Peter, I'm familiar with your time with the Flite Test crew. When I saw you pop up in my feed with a boat, I knew the algorithm must be working - we're in the marine propeller business. With all of that new horsepower, you'll probably need a new propeller. If you would like some input with regard to sizing it correctly, let me know. That's what we do! And we have a propeller design (think winglets) that can develop way more thrust than a conventional prop while reducing vibration, noise and cavitation. More efficiency + happier crew! Best of luck with the Repower!
sam is such a good friend! He's always there
Im a marine mechanic and I restore classic race boats, I would like to say I appreciate you doing boat work the right way, most of the time I see CZcamsrs do things half assed and it’s nice to see quality work.
What do ya think of those LS based gas engines in that Italian boat? Somehow I am not surprised they continued to run the diesel props with the new gas engines or that they failed to winterize the boat...
@Melanie16040 I've posted on that channel a few times. As a marine mechanic it was painful watching those beautiful engines be treated like that by an idiot. But I was also not surprised when I realized he was involved with cars. I have to tell people not to lug their engines daily.
@@patricktennant1585 Did you hear it sunk because they didn't winterize it? Too busy worrying about car engine blocks cracking and going around to drain water from them... Said they thought because the water the boat was in wasn't frozen, they didn't need to do anything to the boat.
The coolant inside the engine is called jacket water, and it heat exchanges with the raw water(sea water)
Yea its raw because its less efficient with cooked water. Temperature differentials blah blah
@@ac.creations ok smartass
@@ac.creations The reason why a heat exchanger is used is that the sea water is contaminated with things that you don't want circling around in your engine. You have temperature controlled coolant (lower freezing and higher boiling point than plain water) which has many additives to prevent damage to the engine and cooling system.
@@esqueue @esqueue yes I know that a heat exchanger is I made a joke about raw seawater
@@ac.creationsWhat's sad is that those are the nonsensical jokes that I make too. I laughed after reading your response but that's a bit too late. LOL
I'm amazed just how much you manage to do every episode! Well done, man.
There’s an old saying about a boat: “It’s a hole in the water that you throw your money into”.😎👍
i'm sure someone has noted it - but you should probably change out the seawater impeller- running it dry can really hurt it.
Was about to say the same thing, running the engine dry kills the impeller, no more than one minute run and it's done, worse if yo rev it. Make sure when you change it to look it for rubber pieces in the water channels, that cloggs the pipelines. The changing is easy, something like this: czcams.com/users/shortsJ4SX0MvVu_Y?si=5O6P1hODPVeYYvnQ
He says he disconnected the water pump for the testing
Questionable life decisions that involve spending tens of thousands of dollars when you don’t have health insurance means you’re officially a boat captain. Congrats! The boat looks great!
I was just getting mad about all the hacky projects floating around youtube and you guys save the day. Great job Dad & Sam.
You guys are smart and a great source of inspiration to so many.
FYI template-building was used before dimensions were invented :D So "whoever came up with the card template idea" is probably a literal fossil by now LOL!
Of course it's old school but many CZcamsrs today would promote a high tech solution.
Nothing i enjoy more, Terrible purchases by someone else and i am here to see it all through
What a beautiful sounding engine!!! You should be so proud bro, keep up the hard work.
This is so great, watching your boat come together. Amazing work.
Really enjoying the boat project videos, this is tied with Colin Furze's tunnel as my favourite big ongoing youtube project. You're doing such a great job on the boat you won't be able to call it krusty soon. Obviously the videos a lot of work (as well as expensive) and you can't make many but the few you have put out are brilliant :)
Check out the itty bitty series on ayofishing. Very similar work but more house boat focused.
B Bust
O Out
A Another
T Thousand
I have been following this project since it was started and this channel for even longer I am so stoked to see the boat get in the water and to see what amazing things he is going to get up to with it.
What you’re doing is so awesome. Not an easy job at all. I’m in the process of changing out my engine mounts right now!!
"And I don't have health insurance."
There's your biggest bad decision. Quit spending money on boats and protect yourself. We want you alive!
This boat is probably less expensive than health insurance at this point. Then at least he gets something of value for his money.
@@brianv5090 Not so much.
@@EatsLikeADuck I don't know his life situation but it's common for sole proprietors to pay in excess of $30k per year to insure their family, and that's with extremely high deductibles that make it entirely useless. These people often self-insure and get a catastrophic event policy instead which is nearly free in comparison.
It's going to be scary when Peter's mid-life crisis hits.
Honestly, I love this project and can never wait for the updates, thanks for the content man keep it up!
My favorite project on CZcams! I can't wait to see what you do with it when she's finished. Would love longer videos of the project too!
Early??
Cant wait for Bad Decisions Part 4!
So cool! Can't wait for more about the boat
Yay! Boat update!! Always stoked to see one of your boat videos in my YT notifications
It's been really fun and interesting watching your projects grow and grow.
Good job with the Wheel house! it makes the boat look bigger and probably feel bigger and also the mast just really adds too it. It so looks like a really rugged work boat now and I hope it lasts you a while
"Screw anyone who wants regular vids and project updates!!!"
~Peter Sripol
I've always enjoyed your videos! Can't wait to see you put this boat to work. It's been fun watching you progress from RC videos, to your own plane and now a boat.
Peter, I am super proud of you for just getting your hands dirty. This is how we learn.
Been waiting for this!!
Such a transformation since she first docked in our back yard!
Absolutely love this project, thanks for sharing Peter:)
Man this is some of my favorite content. All the hard work will definitely be worth it. More boat build content!
you never fail to put out a great video , i find my self going back to old ones while i wait for a new one lol. i was sad to see you leave flight test but i am so happy you went for it and chased your own dreams...i know its different from what you normaly do kind,kinda not BUT i love it and what your doing with it keep up the work sir!!!!
Peter, each video I am constantly in awe of what an amazing job you have done. Like I don't how you built my dream boat without even knowing me. The pilothouse is so cool!! Can't wait to see it on the seas!
Boats are money holes, whatever you think cost will for the hull to hit water, triple it! 😁
Still waiting, keep re watching, I don't even really like boats but I can tell this thing is gonna be awesome.
If you haven't already, please employ Sam fulltime! He is such a nice presence for the show, I could watch Sam solve problems and hang around all day!
The new pilot house looks amazing
Been waiting for this to come out
Opening a cardboard box with a sawzall is a vibe
Wow, beautiful quality work, Peter. I have done many home projects like adapting a Kubota garden tractor diesel to power my Geo Metro and I converted my British 21 foot fishing boat from a small Perkins inboard to a Mercruiser stern drive powered by a GM 6.5 turbo diesel. All of it works but my one-off projects were always hurried and on a budget, almost never with finishing touches. I wish I had your attention to detail...and your budget! You need more pats on the back for a job well done.
this guy is the only youtuber from my childhood that i still watch i just love the shit he does
also i feel like boats are the most pain in the ass vehicles to work on other than an aircraft
Amazing work man!!! Love watching u're videos
That pilot house looks sick now, and the engine is awesome, Im mad jealous of this boat
I love that 😂. I was in the Navy on the USS AMERICA CVA-66, I worked on our utility boats, we had 50' and 45' boats plus we had emergency whale boats. That's called a heat exchanger, it seperates the coolant in the engine from the sea water. Be careful running that without sea water. We had a rubber impeller, but had inboard exhaust. Personally I like the inboard exhaust. It was quite.
Best birthday present is when peter posts
Nice work dude
Looking great keep up with the progress.
My wife and I bought a old destroyed master raft and brought it back to life. You will be so happy once it’s done !!!!
Love the boat series!
This project is amazing! Such a great job you are doing
the boat is coming along very nicely. I love it!
Wow your killing it love the transformation of the boat and the prop shaft alignment tool great idea sure beats feeler gauge method keep up the great work !!
Thanks for saving the content, Sam!
SEABOARD MARINE! I grew up in keyport, stevie is a great family friend and like an uncle to me
I always find excitement whenever you post new videos especially on this boat
The boat video I’ve been waiting for, love this series’s
That engine will outlive my grandchildren
seing your video from France, great job to save an old boat et give it upgrades to fit to your moderne use!
keep going, can't wait to see the following video
swann.
Peter! Your projects are so great!
Love these boat videos!
Peter I’ve never been more excited to see what’s coming next from your channel!!
2023: Solar powered, electric motors, fully autonomous boats
2024: Dinosaur juice is back! Why didn’t we think of this before?!
everyone needs a sam
Gotta do engine alignment with the boat in the water. When you splash the boat, load will change on the hull surfaces and the hull will flex. Engine alignment will change as the prop shaft will move with the hull flexing around it. Alignment is done in 100/ths, boat will flex that much. Other than that, congratulations on the New engine. Love the cummins.