COMPLETE 2018 Mustang GT Supercharger Install! | Roush 700 HP Phase 1 Kit
Vložit
- čas přidán 5. 04. 2018
- 🛠️ Download our free guide: The tools you need to work on your Mustang! bit.ly/465MGQT
Bill shows you how to install a Roush 700 Horsepower Phase 1 Supercharger Kit on your 2018-2022 5.0L Mustang.
610 lb-ft Torque
#FullInstall #HowTo #DIY #EasyInstall #S550 #StepByStep
Purchase Product Here:
www.cjponyparts.com/roush-sup...
Check out more Mustang 5.0L Supercharger parts from CJ's here:
www.cjponyparts.com/mustang-5...
Check out more Roush parts from CJ's here:
www.cjponyparts.com/roush/c/8...
Check out this step-by-step guide:
www.cjponyparts.com/resources...
Subscribe to CJ Pony Parts on CZcams here:
czcams.com/users/subscription_c...
Music Provided By:
www.epidemicsound.com/ - Auta a dopravní prostředky
I just want to say that this is the fifth time I have watched this video. I probably will never get a supercharger for my '18 GT but a man can dream can't he? Keep up the good work Bill.
Facts. Literal facts.
You will get it put it in the universe
@@trewilliams8789^ worked For me 💯🙏🏼
I just bought a 2019 for 30k with a stage 2 roush supercharger on it. 750hp it’s pretty fast it’s the A10. It has 56k miles on it. Owned by a college girl. I love it going in next week for e85 tune. It made 638whp on 91
I’m a mechanic and even I was like nah I’d take it to a shop
Haha
You are the shop
I'm a mechanic too, I'd do it myself, but it does look like a pain in the cock. One word can fix it though, Odin. Better blower, more power, easier install.
@@jamesb1856 Maybe, looking at it on their site, you have no idea what it does or can do. Absolutely horrible description, it could just boost your car's AC for all it describes.
@@brent6109 the Odin is basically a vmp gen3 turned upside down. The put the intercooler on top because there isn't enough room in the valley for an effective traditional setup because of the direct injection on the 18+ cars. That's what makes it better than the roush. Google 18+ mustang and roush supercharger and you'll read all about the heat soak and high iat2 issues.
After watching this, I have so much more respect for video games car mechanics. They literally do all this at the push of a button
Lol....
watched every single minute of this video and i don’t even have a 2018 gt
Lol same... 🤦♂️
same 🤷🏼♂️
Guilty... lol
Yep me too damm I want a new car
I`m 13 and I look every single minute of this video
$7100 for 700hp is a great deal! Pulleys and a tune and you're tearing it up all day. Can't wait to see what the GT500 is going to do.
Back in 2003-2005 timeframe we could get an GT SC kit for $3K to 5K
@@Josh-hr5mc I paid $6100 installed for my SC kit on my ‘12 Tundra. Still runs good with tons of power.
It's a very simple process. First, begin by completely disassembling the entire car...
A masterclass in fitment.. Absorbing to watch!
I've watched this video a couple of times and really respect the ability to do this work.
It does make the whole engine look pretty once installed! Real nice!
Buying a 2020 Roush Stage 3. Watched this to get an idea of what the Roush mechanic had to do just for that TVS2650 supercharger. That's a lot of work! Impressive vid!
Bill :"... and your installation is finished. Be back on the road in no time!"
I just completed this stage 2 750HP kit on my 2019 Mustang GT I took my time and double and triple checked my work and I must say it looks great and is a beast. A few things are different from this video but overall this helped me when I had a question.
I would never do this myself for the following reasons: don’t have 1/4 of the tools needed, don’t have the patience, rather work overtime and pay someone to do it right for me.
But man, what an amazing fuckin video. For those that like to do it themselves, there can’t be a better video. Great job!!!!
Thank you.
Ya he nailed it 👍
I always enjoy your videos brother, very informative and to the point... Thx bill
Wow, the racing red look really NICE on the new mustangs!
Super satisfying install!
Send me 1 for free so I can do a test install to make sure your video instructions work.
Very nicely done, great video and instructions. Well done.
Wow this guy installed this like he invented the system
That's the way it should be it's a good thing to know but it's a better thing to know why
I don't even own a mustang yet but i love watching these videos. great content
You have skills man. Loved this video. Since it was a hour I watched it all day lol. Would come back to it while doing other things
Craftsmanship! Very nice work 👍👍👍
Very cool, CJ Pony Parts.
Just ordered my '19 GT and I've already watched this video twice, can't wait.
How'd it turn out?
Mine comes in at the beginning of August. Gonna break it in then put on the this kit. Pretty stoked.
Hell yeah brother..love it. I have to say this though, if I'm doing all that work to drill and tap a hole into aluminum I am damn sure going to install a heli-coil in the hole while I already have to put in that much work in the head. Heli-coil is much stronger than cast aluminum threads any day of the week.
I love your neon HURST sign! My aunt Pat was the original Ms. Hurst back in the 60's!
Super Video, Klasse Arbeit !!!
wow...that thing look gorgeous in the engine bay.
Awesome video, very detailed!
Wow....you guys are amazing!!!
Send me 1 for free so I can do a test install to make sure your video instructions work.
very cool!..my wife want one her 2018 convertible GT now.
Great video bill !
Great work brother you the best engineer 👍 God bless you 🙏 ❤🇴🇲
Never worked on a ford before, but built a few ej25s and they got lots of connectors too...looks like fun😄
Great video. Nice work.
pro vid guys. love it!
I need this in my life :D
Great video Bill , and congrats on the new power !
My 2018 needs this ima do it
This needs to be my future
This video is different. You can hear it in his voice. He very excited! I would be too if I could buy a 2018 mustang and then at the same time put on a super charger😁
ITS THAT SIMPLE
Right? Lol
Bro this install is intense hahaha, I could never pull this off own my own or with help 🤣. I will pay the coast of Labor proudly and give my mechanic a tip when he's done hahaha
Sick AF
Any other mods recommended after putting one of these on or is this good enough without having to change other stuff to handle the extra power? Any negatives to not having the strut tower brace on anymore?
does anyone else notice this guys choice of watches to wear? my guy got style
These guys are awesome
They make heart surgery look easy
Awesome video
USEFUL....COOL VIDEO
i need this
is a pain in the ass that they dont add the tool to program it whipple does
Get a whipple better..
This dude could have been a heart surgeon.
I don’t normally like jack shaft drives but I think Magnuson is on to something if you want a full front feed but do not want to run inverted. To be fair to Roush his set up won’t be maxed out by most.
Bill great job as always. I want that TQ wrench, do you have a part number from snap on?
Well done CJ.....when do you have time to install mine? Lol 😂
CJ Pony Parts can you do a 2019 GT350R Hellion twin turbo install?
Man I wish I could have been there
Hey guys great video- is there a part for a billet oil cap cover or cap replacement? the ones Ive see are he caps directly sitting on the engine...
thanks!
Great video Bill, makes the work day go by just a little faster.
Do you have a video about a whipple Supercharger installation?
could you use a Oil catch can for added protection since you are now adding pressure in the crank case? And would it work with this mod? where would you put in just wondering?
Bill, doing this supercharger kit required a clutch replacement or 2018 mustang gt twin disc is capable of the hp and torque gain..thanks
Just got my 18 GT and I'm looking for a blower. This one or the Whipple?
The only issue with Roush is cooling... When the ambient temp outside is summer temps, you may get two pulls in before heat soaking happens. they do have the new max cooling package that will certainly help..
What other upgrades would be required on an automatic without the PP? Or would it just well on a even on base gt without any add ons?
well done Bill!
All the elecronics make it a pain in the butt
A full supercharger install video?! Wow, that's awesome! I'd love to see a full install on a big turbo kit for the EcoBoost or an e85 fuel rail kit!
Stephen Nicholson They did a full turbo kit install with the new Borla Turbo Kit for the EcoBoost Mustang.
building a 4.6L on a 4R70W in the 1994 thunder bird i have to hold 25psi with two turbos would probably cost less then the blower ya got their. but then the diff and the tires would explode.
Can't wait the 19th of July galpin is installing this on my 2020 pp1 can't wait but I want a pro install with my warranty intact
Ive been waiting for a good minute😂😂
Excellent video as usual.
Looking forward to you guys taking it to the strip,..I'm really curious what numbers this thing puts down.
hi, just a stupid question as im not from the states, but would this void the warranty?
Is the sc audible from the cabin ? can you hear the whine with this kit?
Is the calibration program included in the kit? Can it be done by the user himself or must it be done by a professional? I live in Brazil - south america!!!!
Just purchased my 2018 Roush Stage 2 & payed for the supercharger as well. However, my supercharger won’t get to the dealer until July. I really cannot wait for this! Especially when they take out the phase 2 kits:)!! I’m guessing a good 760-770to crank ^.^
must be jokking
Hello Bill, may I ask you what upgrades should be done on the side of the supercharger for my car to run durably safely? Really nice tutorial by the way!
The kit is designed to be perfectly safe for a daily driver. If I planned on racing with sticky tires I would upgrade the axles.
I have the same Roush Phase 1 kit for my 2019 F150. Are there any major differences?
I have question, if I decide to buy this supercharge to my 2020 Mustang GT so should I change the OEM headers or it fit on the OEM headers ? Pls expert advise me
this is crank power numbers right? cause that's insane for just a blower alone
Bill looks like he's doing all the work, old mate there helping out has a fair amount of battle damage to his hands though I notice. ; )
Brendan is the host of our classic truck channel and definitely has some talent with the tools.
@@cjponyparts is this a bot,
Does it have to have forged internals for 12lbs of boost?
what size throttle body are you using ..? The same as phase 2 or bigger...If same what size is it...? Thank you
the red 2018 looks awesome. I want one now
I can see myself tried this and tow it to the shop.
BILL do they make a lightweight K member for 2015-?
Hey, does the kit comes with some new ECU software or not?
What is the track for the background music went to the site and there’s a bunch thanks in advance
I would like to get this installed on my 2021 Mach 1 with handling package, 6 speed manual transmission. What would it cost me? 🤔
Hi I’m from Mexico, can u tell me if this product works in a mustang of here?, on your website u says that only works on mustangs made in North America but I don’t know if u are talking about US or Canada ,US and Mexico
Bill, does this Roush scream (whine) like a Whipple?
ROUSH SUPERCHARGER DYNO!!
what are the chances that I'll screw this up and blow my engine up? I'm wondering if it's worth doing myself or paying someone to do it.
God I love the race red
ive heard some dealership sell a mustang with 700hp for 42K?! that comes with the same warranty. that's insane
so they dont provide the tune to flash in with kit?
Good for you Bill, sure it will rip asphalt.
what did the 2015 make powerwise? great video as usual bill!
It made 605rwhp
Amazing step by step video, but it was missing some critical steps, like they didn't show how to take out the ECU, didn't say the torque specs when torquing bolts, didn't go over the tools more in depth. some of us don't know the exact type of tools used like how you drilled that hole on the block then did some milling inside and showing how you determined the right depth. There might be more but man those were critical.
do you have a supercharger option for mustang mach1 2022?
God that red color is mesmerizing
I still miss it sometimes, I was never a huge fan of red Mustangs but I loved the race red!
CJ Pony Parts it looked so good in the video maybe it was the lighting or something but it made me want a red mustang again
I want that snap on torque wrench 😎