This MISTAKE could cost me EVERYTHING
Vložit
- čas přidán 11. 07. 2024
- Click here for the sickest crabbing t-shirts on the internet and use code LUKE10 for 10% off:
darkseas.com/collections/dark...
I let my crab pots sit in the warm Chesapeake Bay water for too long and now they are extremely dirty. My crab pot cleaner keeps breaking and that means I have to pull my pots and power wash them back at the marina. I hope I can get my pots cleaned and back in the water quickly. Dirty crab pots don't catch crabs and thats a huge porblem.
Other Videos:
This DANGEROUS heat is RUINING crabbing
• This DANGEROUS heat is...
This NEEDS to get done BEFORE crabbing season
• This NEEDS to get done...
Boat Camping in a BLIZZARD
• Boat Camping in a BLIZ...
I bought the CHEAPEST Boat off of Facebook Marketplace
• I bought the CHEAPEST ...
CAN IT CATCH Blue Crabs
• CAN IT CATCH Blue Crabs
I put a MASSIVE diesel outboard on my TINY boat
• I put a MASSIVE diesel...
I Can't Believe I Caught This!
• I Can't Believe I Caug...
I Set 900 Crab Pots For This?!
• I Set 900 Crab Pots Fo...
Homemade Crabbing Boat Tour
• Homemade Crabbing Boat...
#Mistake #Crabbing #LukeMcFadden
I tried crabbing on the World's smallest boat, check it out here!
czcams.com/video/RKHP-on7UWY/video.html
Sir, I am 57 years old. Do you realize what you bring to the table? You are showing people what it takes to make it. And you will make it. You sir are pure American, we keep pushing forward and we make a way. Thank you for your videos Terry in North Carolina
Yes sir he is ! I'm from N.C. myself and did you notice he was wearing a t-shirt that read Washington , N.C. ?
@@michaelenglish8004I noticed that too. Love this kid. I pray for his success all the time
It has nothing to do with being "American" 😂 you need to turn off fox fake news and open your eyes. Literally every single country in the world has people that work hard and overcome far more than the hurdles we face in America. Pull your head out of the sand
Man you work your ass off. It's like a viscous cycle. I appreciate what you do
You said exactly what I was thinking.
Man coming from someone who has been a manager for years. You are absolutely doing this right, find yourself Atleast 4 people you would trust with that business if you died. Pay them well, keep the atmosphere as positive as possible and your life will be a lot less stressful keep up the amazing work Luke you’ve got this
Trust. Pay your folks what TRUST is worth. Not what the work is worth. And hold them accountable.
@@sandymush7163I concur. Trust is worth a lot nowadays! At least it is to me.
As an aircraft mechanic, I’m horrified. As a man, I’m impressed.
Same here. Retired military aircraft electrician. If younger, I'd go fix him up electrically
I’m in college to become an aircraft mechanic
He had two pumps though! That's called redundancy, it's what you want!
Also an aircraft mechanic and I’m just trying to ignore all the violations on the electric work😂😂😂
Military heavy aircraft mechanic.. 10 years
Commercial aircraft structural mechanic.. 5+ years
Backyard mechanic... 30+ years
Applaud his thinking and resilience, but cringe of all the violations 😂
When you run out of deck space but still have another 50 or 75 pots to collect, you can pull a platform on pontoons (a water trailer) behind your boat. You need an operator on the platform to run a small outboard to keep it under control and to receive the handoff of pots from the Southern girl. It can get kind of complicated, but it saves a ton of diesel and time. we used a similar setup in the Gulf
Why does the "You ain't no crabber" joke never get old? 🤣🤣🤣
If that joke gets old...well, you ain't no crabber.
@@agmood 😂😂😂
@@agmood Right! 🤣🤣🤣
Ok bud, big idea here. That whole clean down setup is a nightmare, batteries, residential electrical, no GFIs, no water resistance. Eliminate it all. Get a small generator or gas powered pressure washer and wash them down on the boat. You can pull water with a hose and a filter straight from the side of the boat. That whole corner has a bunch of space without the heater and everything to do plenty. Go self enclosed system and eliminate the electrical/leaky disaster waiting to burn up your boat. Greetings from Indian River Bay DE crab team
A pressure washer will work, but I think the problem is he needs HOT water in order to kill bacteria and algae.
And if he needs heat just get a heated pressure washer. Done deal
There is also the issue with dumping water into a boat, a lot of pressure on the boats bilge to keep up.
My guess is the pump motor is burning out by overheating. Running continuous duty in the enclosed bilge with the water temp being mid 80s is causing an issue with overheating.
I think the whole heater/sump/overflow system is just way too complicated with too many fail spots, and sumps in general pull a ton of amperage usually for those golf cart batteries. It’s probably either pressure wash, or dunk hot to remove the grime..one or the other. My vote’s for a quick spray and reload..I don’t think it’ll create any more water than he already has running over everywhere haha. We don’t drop for 4+ days and turn ours every 24 hrs so we rarely get build up like that but less complications on board is always better mechanically and electrically for everyone imo. Make a knee wall maybe in that corner with FRP and have a dedicated spray spot with a backsplash, heated pressure washer would be 10/10!
Brother, i found you videos on CZcams shorts. While finding sobriety!! I binged watching you for the last 9 days and i just wanted to say thank you for providing such raw content
Congrats to u an good luck on ur way 💓
Thank you for watching! Keep at it 👊🏽
Always wrap your Teflon tape on the way the fitting screws on, it will work better for you. Great video
The camera makes it looks like he wrapped it backwards
Finally something good to watch on youtube
What temperature does your engine run vs. what temp is needed to clean the pots? If your engine temp is sufficient, try re-routing the cooling water discharge from the engine to the wash tank and eliminate the burner and pump situation all together. Keep up the good work man. We enjoy the vids!
Came here to ask/suggest this very solution.
@@kevinhowell1618me aswell
This was exactly my thought as well
The only issue is that the wash tank is super hot and has to maintain that temp while the engine water would have to be cycled through the tank and out to the bay so it would only retain the heat from the engine which is likely just a bit too low for this job. If the tank water could be cycled through an independent radiator and back into the tank, then it could work to reduce the load on the heater at least but that's some extra equipment on a purpose made boat with little extra room so the tradeoff has to be valuable.
The raw water wouldn’t be hot enough but he has a heater. It would be just used as a pump. If the engine is running you have water. Shaft seal may not like it if it’s water cooled
I'm impressed by your work ethic and ingenuity!
On our boat when we clean pots we use a propane powered dip tank. We just use buckets to fill up the tank and the propane heats up the tank. Works great and highly recommend it. All it cost is half a propane tank a day
That was going to be my question. Just have a heated tank.
Time for " you ain't no craber " shirts 😂😅
As a 35 year avionics mechanic that hurt my brain to watch.
Harbor freight makes a $60 continous run DC pump that will do the job
"Remember: Eye for an eye...everyones got a sharp knife. I've got one right here" is the most bad ass thing I've heard you say on this channel
Summer of '01 to summer '03 I worked on the Miss Linda out of chesapeake beach md. We got paid 1 dollar a pot to pressure wash them every day after we were done hauling. BUT even your dirtiest pot isn't even close to the ones we were washing. Back then the only way to clean them was to pressure wash so the crabbers waited until there were barnacles and stuff growing on them before they'd haul them in and have them cleaned. They were so bad you could barely see through them. Which makes them even heavier and messier when you have to move and stack them when you're cleaning them. Me and my buddy would clean about 300 a day for 2 or 3 of the days of fishing over the week and split the money. Unfortunately fall of '03 hurricane isabel sank the Miss Linda in the marina and the captain never got her back on the water.
It's simple dear Watson.marine diesel heaters use the heat exchanger discharge water to heat boats. Use it to you're steamer.
Should generate the proper heat 175+
I was going to suggest using T off the water going back out from the engine. Not that knowledgeable on boats. You said it better.
Don't know anything about boats but it sounds just like the heater core on a car.
I used to be a commercial ice fisherman, I thought that job was stressful. This job is making me more stressed just by watching lol
I read his titles & sigh, "Poor Luke. Can't he have one day without problems?"
That’s the joy of being a commercial fishermen wouldn’t have it no other way 😎
I feel for buddy. We king crab and snow crab up here in Barron Alaska. You love it up here. 😊😊😊our high temp in summer is 48 to 52. Winter. Low temp -35😮😮😮😮
You could use a submersible pump and a 5 gallon bucket overboard. You might be dead-heading the pump because of an intake restriction. You could use that method to power wash the pots out on the water. BTW Luke take me crabbing one week. I live in Baltimore and have a season of experience working on a crab boat.
Loved this episode and love your persistence in difficult times - I feel your pain as I was once self employed.
We need to set up some machine donations for this crabber. He needs our assistance!
Thank you for the beautiful sunrise. It brings me back to being a kid when we would go stay with grandpa in south Louisiana and we spent every min we could in the gulf and on the mermentau river. Never can forget that smell and the wind blowing thru as we headed to the fishing spots. I wasn’t too big on fishing but I loved being out there
You so totally sound like an independent truck driver, like my self, the struggles are the same, incredibly the same. Bro, hang in there, as you always do. You are so creative, and positive. Keep the faith, never accept defeat, and "Party on Garth!'.
Another great video of the behind the scenes of crabbing . One of the best channels I'm subscribed to.
Get a jabsco mechanical pump and run it off that 3208 with a belt and you can use a ball value to turn it on or off if you want..i used a 1 inch pump as a washdown pump on my crab boat. They make em in different sizes for you need. So wherever boat was running i had lots of water and they last for like forever.
We don't have Blue crab up here in the Pacific North West, but we do have Dungeness, Rock, and Tanner.
They're measured not to the point tip, but at the base of the tip.
Dungeness minimum.. 6 1/4" (female only & hardshell)
Rock.. 5" (either sex & hardshell)
Tanner.. 4 1/2" (same as rock)
Biggest Dungeness that I have pulled up was over 9 inches.
Though I have seen 10+ inches decades ago
Luke my man, this whole month is like that. Dude, be glad that you are healthy and young. Be of good courage my Brother, or"you ain't no crabber". You Sir are blessed beyond comparison. Lyndsey has your back, and so do I.❤😊
The burner issue was most likely a safety shutoff, carbon buildup, or fuel regulator issue. What might be a lot more simplistic and reliable is a propane instant water heater used for RVs. They get hot as heck, work very well, and come with the properly sized pump that is easily replaceable. Once more it will take up less space.
You have reached the point where you have to bite the bullet and spend the money to get some propper stuff.. constant breakdowns and failures are costing way more than you would spend getting new gear....
this!
@@marcinczapski8547 ???
So agree, borber line cluster f___
The whole point is content..
@@toe-moss1609naw the whole point is to catch crabs
And it’s a worth while investment, a good wash down pump for bout $500, no reason to do all that work to set something up when you’re working with old equipment, that’s setting yourself up for failure
I will never understand people and their malicious intentions or lack of respect. I’m a tradesman in the hardwood flooring industry(I sand and refinish old ass floors or new ones) and I have similar issues from time to time with someone making your day harder with their the lack of experience and knowledge.
Keep truckin hun!
Hang in there buddy stay strong. Keep up the good work. Really enjoy your videos.
Don't forget to go to local auctions for parts and pieces too. I can't tell you how many parts I've collected and shocked by what I use over the decades
I watch from Ireland. You Sir are a warrior. Success falls from your feet when you walk. Best of luck repairing your new boat. This attack is evidence that these people see the champion I (and all good people) see. Keep on rocking in the free world.
Your boat was attacked by weak failures.
Gilligan called and said he wants the SS Minnow back....I admire your tenacity!!! Never give up!!!
Sometimes it's just cheaper to buy new equipment.
Yeah downtime and time in general cost money. Always a fine balance when your running older equipment.
The problem is he half asses everything. But thats part of his deal..
@@OVERCAPITALIZE Yeah he would definitely be time ahead to just get some decent stuff and put it together properly. And then time ahead puts you money ahead.
Use a jabsco water pump it runs off of a pulley on the engine. It gets water through a through hull fitting.
Why not an electric transfer pump?
@@6181green is his priblem not enough electric. I agree with a pully run pump. . Bolted to the enngine.
And just a 3 way valve when water is not required turn the valve to send it overboard
@@mattashford3508all he’s gotta get is one with a clutch. Engage it when needed
@@TugboatMatt clutched one double the price and something else to break. Compared to run it constant new impeller and seal every year and no dramas
New Luke video. What a wonderful friday!
Hear hear!
Good luck this week Luke! You are an inspiration!
Fantastic video! The county's slow process for planning permission gives me the impression that it's not a business-friendly county.
You always come across so positive in the face of adversity. Do your best to keep that up. Its the key to success.
Maybe just an big idiot idea,
a carwash like, pod wash table: you can push them acros a roller table with washer jets fully around them. use a heated power washer to power it.
Glad you made progress with the cooker. Heater outlet temp is a combination of water flow rate and burner temp. I think you are right running a fixed speed pump at reduced flow increases the load and can cause them to fail or trip.
The defeat in his voice hurt me to hear. Hang in there, buddy. We’re all rooting for you.
quick tip,,,,,,, put the thread tape on the threads in the same direction youre tightening. and theres your dinner
Only a few will understand why..
@@stevenhall1239tape doesn’t spin off
I believe he did do it but was using the front camera and flipped it
@williamuskoski1385 like I said only a few will understand why.
Lmao wrong@@williamuskoski1385
Enjoyed the video! Life's like a rollercoaster, with its ups and downs. Sometimes you gotta go through a bunch of rough days before the good ones come along. But hey, it's all just part of the journey to becoming a stronger person. And when those good days finally arrive, boy do they feel extra sweet! You're doing what you wanted as a kid, I wish I could do that. Hopefully this week is better!
Luke, you are insanely resourceful, motivated, and energetic, but I don’t see how you overcome the insane heat.
Luke when I was younger, I was a HVAC technician and I have worked a few Hot Water systems in people's homes. Occasionally pump impellers stop working and the following links I provided are used for hot water use. The pumps run on 120 volts so you would need something which provides this power for the pumps to operate. One of them has a stainless-steel housing. Offhand I am not sure which is more compatible with salt water. The others are cast iron. This just may get your hot water cleaning system operational.
i used to only watch you on tic tok and i finally looked you up on youtube and i loved the content man!
Awesome video!! ❤ It's cool to see how it all works and how much work it really is! You are a hard-working young man!
Power wash them on the boat with a hot water pressure washer. Get a small tank for a holding tank to make sure you have the volume. You can get a small 2 stroke driven pump that could supply the water
YOU ARE THE MAN BROTHER , I LOVE AND WATCH ALL YOUR VIDEOS , DONT CHANGE A THING AND KEEP THEM COMING..! We appreciate your hard work and content it’s hilarious
You need a sidescan sounder so you can find/see the pots when people cut them. No more lost pots, only missing if they are stolen
Man I love your long videos, don't worry Luck things will turn around bud. The goods with the bads we just have to roll with it. The weather is wierd everywhere man. Thanks for the video bro 👍 can't wait for the next one.
i applaud your resolve Luke, if i had been recording my self, it would've sounded like a Zip ties n bias plies video.😅
Thanks for the show guys 🍻
57:55 There’s snow on the roof but a fire in the furnace 🤣🤣🤣🤣❤️😎🤘🏻
Wow! You going thru a tuff time. Good luck Luke, we're still watching!
Hey I am a mechanic for a pressure washing company and I handle the equipment on the trucks and the truck themselves. Actually honestly I handle everything even apparently counseling the crew of guys. Right down the road from you next to BWI. I’ll try to wander over there this week when you’re at your stand to give you a hand maybe or work out some of your problems. There is an acronym/abbreviation to life and a lot of things.,…. K.I.S.S. /Keep it simple stupid. And I’ve seen you kind of done your best to keep it that way. But you have a huge heating machine on your boat already. But that might be something for a later date to come up with but for now I can give you help with your fuel oil burners/diesel. Show you how to repair those pumps or service them pretty much anything to do with pressure washing equipment, fuel oil, burners and mechanical engines.
Live your videos Luke. Hope things get better for you.
Hopefully everything will work out and I'm sure it will. Good things happen to good people.
Have a great weekend broski , keep moving forward .
In my boat the water heater has to heat scource options - cooling water and electric heating. When running the engine, the hot cooling water runs through a coil in the water heater like a heat exchanger to warm up the standing water in the water heater. The water in the water heater gets really hot from this system. I would for shure tap into the cooling water circuit and use the hot water from that. But the Diesel engine, exhaust elbow still needs a flow of water to cool down the exhaust. You figure this out...
I’m no fisherman, so I don’t know much, but I do know a square knot can be used to tie two ropes together but usually is a fairly weak knot. A sheet bent or carrick bend may be a better more permanent knot to tie two ropes ends together without having them work itself apart.
Luke. Keep on keepin on! Just love you!
Pull up the paints and keep going you got this young man. You’re doing great.
Quick Teflon Tape Tip (TTT) - Wrap the tape the same way as you turn so it doesn't back off and bunch up which can cause leaks.
Watching this is better than a high priced movie.
Great video. I think this might be the best one you've ever done. I really enjoyed it. I hope things get better for you soon.
Super proud of you man! And 100% on the employee thing. If you care for them, they will care for you.
I catch stone crabs, your comment about Deadpool is spot on we take the claws and toss the crab back. They grow new claws
It might be a big cost, but I think you should maybe paint your pots with anti-foulent paint. It would last probably 4 or more before the pots start getting dirty. We used it when we were crabbing in the Delaware Bay. I didn't like dipping pots in it, but dirty pots don't catch crabs.
4 weeks of clean pots.
That inline fuse is one of the best setups I've seen
Great determination and drive! Love the video.
Hey, Luke, I worked for a production boatbuilder and we had failures with those Jabsco pumps when mounted horizontally. If you have room try mounting vertically and see how it goes.
Always enjoy your videos!!
Steve in RI
Luke for your age you are doing well you are going have things pop up but work though them . The good lord will reward you in the long run
Love seeing you and I have so much respect for determination and go get it drive. Praying for you bro
Get your water supply from the discharge side of the engine. The water will already be warm so the burner should have no issue getting it hot. As long as you can tee in and get enough pressure, you will have water anytime the engine is running. If not, you may have to tee in somewhere else on the engine where the pressure is higher. The small amount of water you would be drawing out of the system shouldn’t affect the cooling of the engine
Luke, a guy that I used to work for used to say” Some days we eat the steak and some days we eat the fat”. You’re gonna have some of those days that turn into weeks. Keep plugging away at it. You’re doing great dude. Much love from NC
The biggest advantage you have (besides being young!) is that you never appear to give up no matter what! So I say GOOD ON YA!!!
In regards to your water pump issue we do in Alaska. We have a secondary water pump that has a diaphragm in it pulls the seater and pushes it to our system. You could put a secondary water pump that’s belt. Just gotta make some brackets and it will push anywhere to 110 towards 120 psi to your little system
The ups are never as good without the lows. My hats off to you....I would lose my shit like a shit collector with amnesia dealing with everything that entails producing content WHILE other problems are popping up.
You know maybe you can put some floating bubbles along the whole side from front to back of the boat, this may also help with the left to right rocking and help with more floating power
I AGREE 💯 💯 PERCENT ON THE FUEL CONTAINERS ⛽️
we are going to Anns foot longs Saturday, want something to CHEER Ya up?
Absolutely inspirational. This should be required viewing for all young Humans!
"Innovation that excites".... LMAO 😅❤
Oh and the people are at church on Sundays not sleeping until noon ..........
Luke lad that man to chase the blue crab, surprised there be no green ones 😅
I use bigger version of the same Beckett oil burner on my 8gpm commercial pressure washing rig, the igniter can be the problem, but 90% of my issues with that burner were lack of battery power or charge. If battery is weak or too small, the igniter wont fire and the pump will keep dumping diesel into the coil and if the igniter decides to fire again, it can burn down your boat. Neard many stories of pressure washing rigs and trucks burning down from that. They make small 4gpm hot water pressure washers. Maybe thats the route u should take
This is an incredible crew.............Go Crabbers!!!!!!!!!!!!!!!!!!
To avoid leaks, always wrap tape clockwise ✌️
Consider getting one of the Milwaukee tool m18 pumps- even if just to have on boat as a backup that can swap in with a couple hose fittings.. might not be a long term solution but could possibly get you thru if there is a breakdown- those little m18 pumps are workhorses-. Also consider getting one of those ecoflo or jackets battery backup generators so you can run a 120v pump instead of those 12v. If you got a big enough battery generator- maybe even a small solar panel I bet you could go all day long pumping
Keep your head up buddy.Hard work pays off at some point. I just haven’t figured out when that point is. Love your show keep up the good work.
Love your content. I wish I was independently wealthy enough to send you a complete load of parts you have needed. Your work ethic drives my own projects.
Luke, for now couldn’t you use a small like inverter generator like a honda 2200 to run a 120v pump? Let it run the burner too. Thats how bigger comercial boats run continuous duty pumps is with a generator. But I think you can mount a belt driven on the motor somewhere and just let it be separate from the cooling system. Third option would be to add another big alternator and keep the pump battery and alternator as a separate system. Low voltage will make a 12v pump heat up from the inside. The more flow on pumps is more load so it causes more heat to pump water overboard. Keep up the good work.
It only counts as failure if you quit trying to make it work! Keep it up! Love the people you surround yourself with......good job!
Not sure if it’s been said or not, but you need a continuous duty relay to correctly run that pump to keep it from over heating. Great vid, keep it up!
Just hanging on a pull-up bar for sets of 30sec to a min is amazing for shoulder rotator cuff issues. I have first had experience w how well it helps!!!
To make it easier for the water pump, I would lower the hose outlet down to sea level. Then you get a suctioning/siphon effect to help it out