Draw the shear and moment diagrams of the arm ABC | Problem 6-14 | Mechanics of material rc Hibbeler
Vložit
- čas přidán 1. 12. 2023
- 6-14. The industrial robot is held in the stationary position shown. Draw the shear and moment diagrams of the arm ABC if it is pin connected at A and connected to a hydraulic cylinder
(two-force member) BD. Assume the arm and grip have a uniform weight of 1.5 lb/in. and support the load of 40 lb at C.
Dear Viewer You can find more videos in the link given below to learn more and more
Theory Video Lecture of Mechanics of Materials by Beer & Johnston
• Mechanics of Materials...
287 Problem solutions of all chapter of Mechanics of Materials by Beer & Johnston
• Mechanics of Materials...
Chapter 12 Deflection of Beams and Shaft of Mechanics of Materials rc hibbeler (09th Edition)
• Chapter 12 Deflection ...
Chapter 11 Design of Beams and Shafts of Mechanics of Materials rc hibbeler (09th Edition)
• DESIGN OF BEAMS & SHAF...
Chapter 9 Stress Transformation of Mechanics of Materials rc hibbeler (09th Edition)
• Stress Transformation ...
Chapter 8 Combined Loading of Mechanics of Materials rc hibbeler (09th Edition)
• Combined Loading (Chap...
Chapter 7 Transverse Shear of Mechanics of Materials rc hibbeler (09th Edition)
• Transverse Shear (CHAP...
Chapter 6 Bending of Mechanics of Materials rc hibbeler (09th Edition)
• CHAPTER 6 (BENDING) BY...
Chapter 5 Torsion of Mechanics of Materials rc hibbeler (09th Edition)
• Chapter 5 (Torsion ) B...
Chapter 4 Axial Loading of Mechanics of Materials rc hibbeler (09th Edition) • Chapter 4 (Axial Loadi...
Chapter 3 Mechanical Properties of Materials of Mechanics of Materials rc hibbeler (09th Edition) • CHAPTER 3 MECHANICAL P...
Chapter 2 Strain of Mechanics of Materials rc hibbeler (09th Edition)
• CHAPTER 2 STRAIN, MECH...
Chapter 1 Stress- Internal Loading of Mechanics of Materials rc hibbeler (09th Edition)
• CHAPTER 1 STRESS- INTE...
#mechanicsofsolids #strengthofmaterialstutorials #mechanicsofmaterials #combinedloading
#engineersacademy #solidmechanics1 #solidmechanics2 #solidmechanics #mechanicsofstructure #solidmechanics
Excited for this one 🎉
Thank you and after watching, your feedback will be needed....
excellent work
Thank you 😊 💓
thank you sir
Hi, this is very helpful thank you can please explain the trapezoid area calculation because it actually comes out ot 3863, which would not make the moment go back to zero. Thank You!
Area of trepizoid is explained in the video . I would suggest you to solve it again.
Area 2 should be -3863
It's a very minor difference but yes you are ✅