my advice - be careful when repairing a brake caliper
Vložit
- čas přidán 22. 04. 2024
- my advice - be careful when repairing a brake caliper
🤝You can support the development of our channel by following the link:
/ @opelservicekyiv
The money received from sponsorship will be used to purchase materials and spare parts for our research aimed at creating useful videos.
For example: transparent parts, covers, purchasing units for complete disassembly to learn more interesting information.
Also, it will be pleasant for us to drink delicious coffee during the video shooting process and have more motivation.
Thank you all ❤
Website: opelservice.com.ua
Facebook: / opelservicekiev
Instagram: / our_opel_service
Support us: / @opelservicekyiv
#shorts #mechanic #carrepair - Auta a dopravní prostředky
You put one of the old brake pads for the piston to blow out against. 😊
I start with both, just to keep things controlled
Omg we make dollars not sense 😂
@@auk7150 Well, ok look at the labor time to rebuild a caliper, & the markup on a reman caliper. What works to your advantage? Sometimes you might be surprised.
@@user-mx7xd4pk5h I’m for rebuild and acknowledge the point , but why not use the old pad , what’s the point of creating a more dangerous work environment ..
@@auk7150 Well, the object of this video is to not put your hand on the piston & blow it out with air. But if you are going to use air, you want the piston to come completely out, or I do, it is all to speed up the dissemble of the caliper. Sure, put a towel over it. Safest thing is to get reman calipers, so you don't dissemble them. It is ok for a doit yourselfer, but for a garage, it makes more sense to replace them, & rotors.
Small block of wood wrapped in a shop rag is what you needed
I also have always turned the caliper upside down after the rag and wood are in.
Hey that's a damn good point as well haha.@theunofficialskaterboys1027
Tobey Maguire saves the day again!
👍👍👍
He'll put some dirt in your eye, atleast his eyes are covered 😂😂😂
Couple of shop rags and let her rip.😊
Peter??😂
On a different multiverse, spiderman was a mechanic.
Would check out since it's a form of engineering.
I’ve always just used a small board never had any issues
Dang right🎉🎉
Agree 👍
Or put your hand there to slow it down. That's why you got 2 of them.
They grow back after 7-10 days on light duty.
@FlatBroke612 if you break your fingers doing that you best increase your calcium intake
El video es de lo más explícito!!! Jamás poner la mano al tratar de sacar el pistón de la pinza de freno usando aire comprimido....hay que poner un taco de madera que amortigue el impacto de su salida. Muy buen video que ayudará a no cometer un grave error.
Saludos desde Santa fe, Argentina.
Bienvenido. Gracias por calificar el video. Hola a ti también desde Kyiv, Ucrania.
Я деревянный брусок подкладываю и ничего не разлетается
I learnt this the hard way😢
well you don't know English well so I'd say your IQ matches your decisions. loooowwwwwwwwww quality.
Why am i seeing this video? Gen-z at it again
Вот именно - я себе так знатно палец прищемил - чуть не сломал. Поршень, зараза, не выходил - клинило , пришлось крутить щипцами и по-разному, вот он в итоге и выстрелил чуть мизинец не снес.
I had to watch it twice to see, that this was a pencil and not a hex 😂
Thank you for the advice!! I’m about to do a brake caliper repair, I’d probably hurt myself!
Just fold up a rag like every decent tech has actually done
I lost this tip if my finger in a pneumatic clamp whilst working as a machinist when I was 18. Air and hydraulics are very powerful and won’t bat an eye at body part they will go through it.
I used to be a apprentice machinist and I remember holding my finger in the chuck and almost pressing the pedal to see how tight it would feel, I was one iq point away from turning my finger into mush.
I did a 5 year engineering Apprenticeship. Safety Pictures.
I was shown a young man with long hair, it got trapped in a lathe and ripped his scalp off.
Milling machines were the most dangerous, because sometimes you had to work with the guard off, people lost fingers and hands. The Foundry roof had water seeping through, in heavy rain, it went into the molten metal and exploded. 2 men fell in the hot molten metal, "nothing left"!
Always double check, equipment is set up Safety. Sometimes we needed 2 people working together? So someone could get to the Emergency Off Switch.
Я сразу испугался, когда он пальцы поставил, аж рука дёрнулась. На меня с домкрата машина падала, теперь я контролирую ТБ даже при походе в туалет😂
Así tamboco se hace . Con poner una pastilla de freno vieja es suficiente
Try a 2x4
What he said 2 / 4, but we no longer rebuild them. We just buy them rebuilt.
Tony hawk’s a mechanic now 😂😂😂😂
2x4 works great
tried my fingers once. only did it once…
make the air pressure less??😅😅😅
Yes, you can reduce the pressure, but you need to control this process
@@opelservicekyiv какой процесс? Надо контролировать? Давление?
@@samsungsamsung-qc5uu давление. Можно легонько нажать придерживая, а можно на полную и вылетит так что потом и не найти
@@opelservicekyiv ну это и козе,понятно
For many many years I simply wrap the caliper with a shop towel and it will catch it.
I broke my finger doing this, a painful lesson!
i like how he was already prepared with the safety goggles on, he knew what was coming.
He give attention for us
Be carefull with your hand
Я обычно ветошь кладу , и удар гасит и не вылетает
А не проще убавить давление. Недавно вот только менял поршень, ставил 2 бара и чуть нажимал на пистолет, и поршень не превращался в пулю
Тоже тряпку ложу и никаких проблем
Use a block of wood
Why is Tobey Maguire breaking things with my break calipers 😂
Оппа, спасибо, вы сохранили мне пару лучевых, планирую пойти в ученики автомеханика
Why Peter Parker why?
👍😀
I once shot a master cylinder across the shop at tech school. To this day there is an indent above the classroom door where if hit the concrete. Now the instructors do not allow anyone to have air nozzles with rubber tips or rebuild cylinders alone. Good times
Yes, I agree, the cylinder extension force is very high.
что вы ему даете советы про брусочки, он вам показал что с пальцами будет)))
👍👍👍
Best to wrap cloth around it to both capture the piston and any mist and brake fluid also to dampen the piston from hitting the other side.
That was a perfectly good pencil.
I didn't know that James McAvoy work in a repair shop.
When did Peter Parker become a mechanic 😂😂😂😂
Bạn sẽ mất những ngón tay nếu như không làm theo anh ấy😂
Maybe turn the pressure regulator on your air compressor down a little.
I have had caliper pistons so frozen that i have had to use grease pumped into the caliper to move the piston out.
Regulate the pressure down to just enough to move the piston
Я брал очиститель карбюратора и надевал уплотнитель. И он потихоньку выходит . на месте приора
Tobey Spiderman should grab it 😅 .
I have a hand pump that is made to calibrate pressure gauges up to 600 PSI. One piston took 400 PSI to pop out.
I use to pack a rag in front with caliper facing down and slowly let air in and it didnt hit the deck.😊. I just buy new ones now..
Over my friends house one day he told me to grab a couple things out of his brake tool drawer. After opening it I saw a hockey puck and was clueless why it was in there. I laughed at first and he did explain it to me but after seeing this video now I get it. Smart idea!
Thank you
The Peter Parker mechanic
That's good to do it immersed in a bucket with water... so it doesn't bounce around and can hurt someone...
THANK U FOR THAT VERY GOOD ADVICE
Always happy to help. Thank you 😀👍
Я раз себе так палец чуть не раздавил 😢
Thank you very much for the information 🎉🎉🎉🎉
Thank you for watching the video too
Or push it out while still connected with hydraulic pressure for controlled release
Bcos John Wick uses a pencil to kill someone.
You want to do the same.😂😂😂
I haven't rebuilt a caliper in years, but I always used a brake pad turned it with the pad towards the piston. That way it wouldn't scar the piston. Never used that much air pressure either. Nowadays I just replace them because the aren't too expensive and you can get a lifetime warranty.
Quad piston calipers are always fun.
When did Toby Maguire become a mechanic 😂
Ja prvo istjeram kocnicom do kraja pa blokiram crijevo da ulje ne izlazi i izvadim rukom klip.
Waldo looking for his pencil ✏️ 😅
In school we did that for a seized caliper on a old Cadillac and all I did was just put a piece of foam on it and it was finee
Wow I see alot of people have gotten hurt because you use to much air pressure and don't use a sponge to reduce the piston to hit and come out fast just saying I did this for years and never got hurt in my 35yrs experience
木の板を使えば鉛筆も無駄にならず、ピストンも痛むことはありません。
Piece of 2x4 6 inch long with the end rounded off. It’s the perfect buffer for brake pistons.
Alternatively, use a bicycle tyre stirrup pump with a beach ball adapter. You will easily shift a stuck piston without blasting it out.
Another way is to cut off the brake hose and use a football spike into the cut hose. You might need to make a clamp to grip the spike. It works, costs nothing and is always there for next time.
Ese bro se parece a Spiderman
You can buy a small hydraulic cylinder to do this with a pipe adaptor , use a block of wood between the piston and the caliper body to save damage
That's funny. I built one years ago out of an old Electroglide front brake master, a chunk of handle bar and a steel plate base. With a flexible brakeline with adapter fittings on the end. Use it for bench work on all sorts of cylinders. It will nicely blow apart most calipers.
Have fun.
никто не отменял регулятор давления и ловкость рук.
Good explain !!!
Thanks a lot
Да, и пальцы попалам, мы обычно молоток ставим и выдавливаем в основном на месте.
попал палец месяц назад, чуть не отрубило. болит ещё 😂
Use tyre footpump instead, the piston will come out in a controlled manner.
I kept a 8" 2x4 in my toolbox just for that purpose
дощечки не нашлось?
Use fluid pressure to slowly push the piston out.
You could just have a regulator at that station and turn the air pressure down some.
Good demonstration, good warning. Also I like that bench vise, looks good and solid.
Thanks a lot
I simply remove the brake pad and pump the pedal till the fluid pushes out the piston
Shop towel does the trick
You don’t need so much pressure. Just enough to get the piston moving.
anda menyelamatkan banyak orang
i remember when i did this first time with 2 pistons they were corroded asf and one flew above my head the other barely missed my chest
Learnt it the hard way😂
Are we pretending like we don't just use the old pad?!?
Jajajaja que bueno!!! Me meo
A longer piece of 2x and hold the end and nothing to chase and pick up👍
Use a hockey puck it won’t damage the piston
Just use the brake fluid pressure to get it almost all the way out. Then you can remove the caliper and pull the piston.
You switched blow guns. Show it with the blue one from the beginning
Try bike tyre tube. Reusable and less mess cut to length
Saya menyukai video anda
Terima kasih banyak teman
Oh.... I would never have thought of putting a pencil there in the first place.
Because it's a stupid idea
un trapo viejo bien acomodado sirve hasta de protección para el pistón y los ojos
Hollywood actor Jeremy Renner becomes a Auto mechanic😅😅😅😅
very similar
or adjust the pressure to avoid pushing tha piston in that manner 🤷♂️
and rags to catch the piston at the pads location
I once did my mountainbike brake like that... piston shot out, bounced of the wall, against the ceiling, onto the floor and disappeared behind some drawers, not to mention there was mineral oil EVERYWHERE. lesson learned xD
Yeah because I'm always shooting air thorough brake cylinder when I'm working on it😊
This is why I have a hand pump with swappable fittings in the shop 😂
Oh man, at the first time i felt like wathcing tobey maguire
Thank you
That's good advice. Thx.
You're welcome
His spidey senses were tingling
Где же ты раньше был? Я себе так палец прибил.
This is what happened AFTER he crushed the 2"x4" block of wood.
I just hold my hand over it and let it hit the end and pick it up. Never failed.
Un gran ejemplo y una gran lección para aquellos te quieren hacer los rápido y fácil
Estoy de acuerdo, hay que tener cuidado
Someone in one of the shops i use to work at did this.... Broke some fingers...