BMW M6 V10 Goes Berserk on the Dyno! Unexpected POWER!
Vložit
- čas přidán 15. 06. 2024
- Join us on AzizDrives for a thrilling evening as we delve into the maintenance journey and first-ever dyno run of my BMW M6. After addressing an oil leak with the help of MC Motors, who replaced the oil cooler and refreshed the engine with new oil, we're now set to test the true horsepower of this beast before and after a stage one tune-up.
In this video, I share the entire process, from diagnosing the oil leak issue to the meticulous work done by MC Motors. We'll take a closer look at the V10 engine's condition, discuss the importance of regular maintenance, and reveal the surprising results of the dyno run. With 114,000 KM on the clock and a recent service, including spark plug changes and SMG service, the M6 is ready to show off its power.
The highlight of this journey is the dyno run, where we push the M6 to its limits to see if it can surpass the 480 horsepower mark. The anticipation, the roar of the engine, and the final horsepower reading make for an unforgettable experience.
For those interested in the technical side of car maintenance and the exhilarating process of dyno testing, this video is a must-watch. We also compare the before and after effects of a stage one tune-up, showcasing the M6's performance potential.
0:00 - Intro
1:20 - The Issue
3:48 - Amstec Motors Service
8:45 - Oem or aftermarket?
10:15 - Dyno Run and Power
13:25 - Power Output
Our Social Media:
IG: / azizdrives
Tiktok: / azizdrives
Tiktok 2: / azizdrivesint
Twitch: / azizdrives
Twitter: / azizdrives
Facebook: / azizdrives
#bmwm6v10 #bmwm #bmwm6 #m6v10 #azizdrives - Auta a dopravní prostředky
495hp after 18 years is absolutely incredible,that's -6hp from brand new!!
Actually MAHLE does make the original Oilcooler but without BMW Logo and if you know M539 Restorations he also ran 10W-60 and 5W-50 with same specs and for him it was fine although he pushes his E60 M5 hard. But still its your car you can decide how you want it to be and good power .
The laughter is contagious 😁 love it, love the energy, and iff you can keep up with M6 content. We all enjoyed it. And again Hello to Amstec 🙋🏿♂️
All love and respect your the best contant creator i follow
It looks good in person always
Since you live in Switzerland, I´d definitely switch to 5w50. m539 and many others including me have used it happily. with colder climates 10w60 can be too thick for startups until it gets to temp so problems can occur and premature wear. I would also look into adding ceratec to your oil and personally, I would only use liqui moly with my car especially with M cars. that SMG oil you show there is very, very old btw. luckily you did this now before problems occur :)
nice bro. thats actually pretty incredible that after 18 years it didnt loose any power at all
Let's goo after a lon time we see the beutiful m6 v10
I think you should put eisenmenn oval exhaust on the car
But anyways love your content keep it up❤❤❤
We need to hear this v10 scream
That is a minter mate, haven’t seen such bottom for a long time on a 17 year old car 🎉
I bought a 630i lci one week ago it only has 69k km but still i am going to change also the spark plug and do the service and i am also from Zug my plate nr is 120 yours 119 crazy 😂❤️
Hey you do it well Bro! Go forth with your Content please 🤩
This made me laugh 😂 13:28
crazy good engine, but better watch for thr rod bearings
bruh it "only" cost like 2-3k could be worse the smg system is more touchy that rod bearing thing is fukin annoying tho
@@AncientEvilSaiyan WANTED TO SAY THE SAME, THE SMG WILL FAIL
THE THROTLE ACTUATORS A 100'0 EURO PER PIECE, YOU NEED 2
THE THROTLE BODY ACTUATORS THE SAME AMOUNT AND PRICE
THAT IS FROM THE TOP OF MY HEAD
Der braucht ein neuen Auspuff, dann perfekt
Only tune wont do much, they usually just raise the rev limiter to 8400rpm and claim 10-15hp gain... not noticable in real use. If they're really knowledgeable, they'll tweak the vanos and fueling so you'll have a very slightly better torque curve. If you're already paying the money for a custom tune, buy some long tube headers (Evolve, Supersprint, heck even some chinese copies, if they make them fit properly) and tune it with the headers (the primary cats are the main restriction). It will make 30-40whp more, if the engine is healthy. And the top end of the car will be even more maniacal. Trust me, I had a full Hamann (eg.Supersprint) exhaust, race secondaries, etc, it was claimed to make 550ps. 100-250 ran faster than stock V8TT Ms...
Man you are the king i swear, can you tell me about your setup maybe on Instagram, ill doo the same thing
I don't want to come off as judgemental, but I don't think that selling the m2, which was almost brand-new, and keeping the m6, which is more than 10 years old, is a good decision
Of course its not a good decision. Thats the fun thing about it 😂
do you care to elaborate on that? In my opinion, the older M6 is a better choice over M2 if you can afford the M6 lifestyle (gas consumption, burning oil, letting car warm, learning how to drive SMG which in my opinion is the only gearbox that should be in this car) that is. But that is my opinion.
Are you talking about your observation from the perspective of car collectability?
or ownership experience like maintenance and the car being hassle free because it is new (M2 coming out with issues from the factory btw like leaks and bad front brake setups)
or some other reason I can't imagine.
Buying a second hand e63 M6 and spending money on the maintenance (DIY) is cheaper than a new M2 and its a more rewarding car to own, even the aftermarket is amazing for it. The body kits and Stage 2 plus kits give you a lot to play around with and make the car your own.
@@commissarsydian4125 WELL THE V10 IS JUST A BAD EGINE WHICH HAS ABOUT 7 OR 8 THINGS THAT WIL FAIL, NOT COULD FAIL BUT WIL, THE SMG BEING ONE OF THEM. IF SOMEONE DOESNT ATEND TO THE PROBLEMATIC PART YOU WIL HAVE AN COMPLTE ENGINE FAILURE
Now stage 2 tune it
Yeah and completely ruin a classic
@@v12-s65 do you know that this chassis is capable of with standing over 750 hp like g-power and lumma proved, so the chassis will mot be ruined by any means
@@lentz_alhe‘s not talking about the chassis, he‘s talking about changing a classic old legend and tuning it for basically no reason whatsoever
@@ylli. I don't think you ruin an old and legendary chassis by making it exceed your expectations
@@lentz_althat's true, but turbocharging ruins the characteristics of the engine and especially it kills the beautiful V10 NA sound. But yeah, you can get a lot of power out of them with turbos