LUX TEST of the new Coplus C6 Corvette OEM-style LED Headlights!
Vložit
- čas přidán 25. 02. 2023
- Finally! I am showing you guys what you wanted to see...actual LUX measurements for the new Coplus C6 Corvette LED headlights! Watch and comment with your thoughts!
Order them here: geni.us/coplusc6headlights
➤ Subscribe for car stuff, how-tos, product reviews, garage life, and more:
bit.ly/jasonsgaragesub
➤ If you want to see everything that I recommend on Amazon, I made it easy for you:
bit.ly/jasonsrecommendations
➤ Armor Shield IX is the best ceramic coating available. Get yours at:
bit.ly/armorshield
USE CODE JASONSGARAGE25 FOR $25 OFF!
➤ Looking for Corvette lighting upgrades? Use this special link to get 10% off Corvette lighting from Vette-Lights: bit.ly/vette-lights-discount
(Discount applies in at checkout)
➤ Want 15% off Lamin-X? Use this link!
bit.ly/laminxdiscount
➤ All the cool kids Liked my Facebook page. Are you cool too?
/ injasonsgarage
➤ How's about Twitter?
/ injasonsgarage
▬ ADDITIONAL LINKS ▬
Manual for the Coplus "Classical" C6 Corvette LED Headlights:
cdn.cybassets.com/s/files/234...
▬ ABOUT JASON DEBLER ▬
I have been a car enthusiast since the age of 2. From watching professional drag racing to bracket racing myself and being involved in significant projects with the Chevrolet Camaro and automotive agencies, cars are my life.
▬ AFFILIATE/ADVERTISER DISCLOSURE ▬
My videos serve to entertain and educate car and garage enthusiasts, often through informative and honest product reviews and recommendations. My videos and descriptions will often contain affiliate links, which means I may earn a small commission on a purchase you make by clicking on them (at no extra cost to you, and sometimes I will help you save money).
Any opinions expressed are 100% my own. I retain full editorial control over the content in my videos and will never make a false recommendation as a result of any form of compensation.
If you do purchase through my affiliate links, I thank you so much for your support as it allows me to continue to make helpful and entertaining videos for your enjoyment.
▬ WARNING - DON’T DO ANYTHING DUMB ▬
Standard disclaimers apply. This video is for entertainment purposes only. I assume no responsibility for any damage to watching my videos. Please be careful - the consequences of a mistake could be disastrous.
#jasonsgarage #corvette #led - Auta a dopravní prostředky
![6 C6 Corvette Tips and hidden features you didn't know about [6 BLEW MY MIND]](http://i.ytimg.com/vi/lc_rUS_9yLE/mqdefault.jpg)
Finally! I am showing you guys what you wanted to see...actual LUX measurements for the new Coplus C6 Corvette LED headlights! Watch and comment with your thoughts!
Order them here: geni.us/coplusc6headlights
Thank you so much for this video, I was never really into the Morimoto styled headlights cause I just never liked the line. The circles will always be my favorite on these cars too!
Hi Jason! There’s another thing to consider here. Lux isn’t everything because HIDs project way further than LEDs. I don’t know the science behind this. My C6 headlights had PPF put on them by the first owner so they are perfect. The seals are tiny bit weathered but I’m not bothered. My drivers side adjustment rod thing moves around in the fender, but it still works to adjust the headlight.
I have a C6 and I thought I saw COPLUS either offered now or was going to offer in the future a C7 style assembly. I like the sequential turning signal LEDs. So could you comment on the C7 syle lights for my C6?? Thanks!!!
Finally! I bought these after I found them on your video. Been waiting for this video lol. No worries happy to see it. They go in my vette springtime.
please report back when you install them ...
Soon
Well they installed as they should. Not 100% perfect fit but my oem housing didn’t either. But damn close. Lights are super bright. My switchbacks worked fine in parking lights. Unfortunately the high beam is h7 so my new led bulbs don’t work but will get a new h7 set. I bypassed the drl wire as I don’t like wires in my engine bay if I can avoid it. I just direct wired them into a harness. They function with my parking lights. Overall I’m super happy and love them. Tricky to get high beams where you want them have to turn the bulb to find the proper location for beams.
@@fst5256 any photos? I want to keep the oem look on my car but with the black housing. These look to be killer compared to opening up my oems, painting them black, installing new lens and then realizing I cant go back to victory red lol.
How can i connect the side marker turn signals with these headlights??
Price is ok and they will probably look great with you build, however my goal is install the C7 sequencing light replacement. I really like them. So glad there are so many options to satisfy all of us ! Thx for the great vid.
Me too. I thought I saw a COPLUS C7 style on a video somewhere. Then again, I'm old a a bit senile too probably.
I really like them. I actually like the black hsg. Trying to decide which headlights to install on my white C6
Just Got an 08 C6
Awesome Job Bro.
Thanks, buddy. What do you think overall? Good C6 upgrade?
@@InJasonsGaragequestion for you, I saw your shifter in another video and I was wondering if you could give me the link to where you bought it?
Nice assembly, I prefer the C6 style over the C7 but I like my inner's body color. Black sticks out like a sore thumb to me on any color except a black car. My C6 is white so the black inner's would look like two black eyes. Just my opinion. I did put switchbacks in my turn signals and that made a big difference.
White C6's look great. I personally like them all white or with black accents like the roof and headlights. Can't go wrong either way! What switchbacks did you go with?
@@InJasonsGarage Sorry. I don't remember the brand. Got them off Amazon. I did also install the LED backup lights per your site (thanks for the discount!) and they are a great upgrade. Two of my club members also did the change. BTW, the white GS in your video at SEMA when you introduced the Coplay products is just like mine except I have a conv.
I have to agree that the lights look great on a black car but I wouldn’t install them on my Monterey red Vette. Too bad but I really like the original look. Thanks for all the great details!
Thanks for the input!
🤡
Nice video. but if COPLUS does not allow consumers to fit int stock HID if they want to and they are also sealing the LED means that there is no way of upgrading / maintaining these units in the long term ... so its a no for me. I would definitely consider them if they had an alternative / similar assembly that would allow you to retrofit the stock lighting into it (HID).
Yup, I do mention this at the @5:45 mark.
Compared to Morimoto´s headlights, is the quality as good because now I am intrigued to get them thanks to your video.
My understanding is they are similar in quality, if not the same.
@@InJasonsGarage thank you, I ordered a set and excited to see how it looks when they come.
@@InJasonsGarage I just got the headlights for my c6 and they are nice, the only thing I encounter was the mounting bolts had to be swapped from the OEM unit because didn't come with the washers, the pigtail is too short and the alignment setscrew is very difficult to adjust because it does not come with the same mechanism like the OEM ones.
Was excited about these headlights, however when trying to order, they wanted $150 for shipping from CA to MO? 😮Just curious if you purchased these lights from Coplus or if they were given to you?
I picked them up directly from Coplus when I was at the SEMA show and had them shipped to my house.
@@InJasonsGarage I watched the video where you picked them up and shipped them to yourself, however what I’m asking is, did you actually pay for them or did they give you a set?
@@frozgt77 Heheheh...why? Are you thinking about starting a channel? 😄
Jason, nice video...for $800. I don't think that it's worth the money to change out the OEM units to these
Agreed. spend that elsewhere. Put led bulbs in the oem much cheaper and perhaps better lighting than either.. :)
@@petelanzone484 LED bulbs in a non LED housing are garbage.
Agreed. Not good at all. That design doesn't make sense vs. the original. At $800, it's not a good upgrade for the money. Installing F9 or H60 LED would be a much better and cheaper option. If possible to install NHK 4+ projector into a low beam, that would've been my choice if I owned c6 corvette. The other beautiful led style @4:05 is worth it.
@@ejaisonl Well opinions vary.
@@ejaisonl i do not think it is the case actually because the LED is sealed and so the projector setup might be tailored for LED use ......
Did you install these yet? I’d love to see them on the car.
Not yet, still have the lights on the shelf. I have shifted my priorities a bit. I am now working on a video about making my car faster. Stay tuned...and I'll get to the headlights eventually.
Man I've been trying to order these lights, I can't get through
What do you mean by "can't get through"?
After owning 2 pairs of the Morimoto XB C7-style headlights, I can say that the rubberized seal and everything behind it on the rear of the unit looks identical in build style and materials to those. Everything about it is seemingly Morimoto quality, which I felt rivaled OEM on my sets.
In terms of styling, I felt the only thing that aged these cars was the headlights, taillights, and old incandescent bulbs. After buying my C6, one of the first things I did was upgrade every possible bulb to LEDs, change the side markers, and swap the headlights and taillights for Morimotos. That being said, I do feel that the C6 style looks good, especially with darker housings (which I know isn't for everyone). The fact that these give an option for people to retain the styling is excellent, but I find myself surprised they didn't make the switch to full LED. Overall, with these cars all being 10+ years old now, so many of the stock headlight units are starting to fail or just become dangerous from a lighting aspect. It's nice to know there's an option out there for those that love this style.
Thanks for the input!
Hello is this website legit I want to order these lights it says they from Taiwan?
It is a link to the manufacturer web site. They are based in Taiwan.
I'd have liked to see what the high beams do..............
...I don't know why I didn't think to test those as well. I guess I was just excited to cover the details. If I do a follow up video on these, I promise that I will test the high beams! Thanks for the suggestion.
30% is how much stiffining material is in the mix. Carbon fibers or Fiberglass. The higher the content the stiffer and more durable the part. Conversly it shortens the die life in the factory.
check out AvE channel he covers it well in his reviews of hand tools.
When is the install vid coming
Sometime in the near future when it warms up a bit more....and I get around to it. 🤣I probably won't do a full step-by-step video as there are many out there that do a good job of it already. Was there something specific you were looking to see?
@@InJasonsGarage All the wiring connections and suggestions for upgrading the turn signal & high beam bulbs.
I read somewhere on line that Coplus makes some of Morimoto's lights and that Coplus has been making lights 25 +/- years.
So Jason, the weather is warming up pretty good these days.
@@billysmith7894 Indeed it is. However, I have shifted my priorities a bit. I am now working on a video about making my car faster. Stay tuned...and I'll get to the headlights eventually.
JASON , this may sound stupid , but why not just change the bulbs to LED??
Don't sweat it, buddy...that is a GREAT question! There's a couple of reasons why...
1) People want the upgraded DRL bar to make the headlights a bit more modern.
2) More importantly is that there doesn't seem to be a good LED replacement for HID. Check out this video from my friends at Headlight Revolution: blog.headlightrevolution.com/d1s-and-d2s-led-headlight-bulb-replacements-brighter-than-hid
I think this is why you don't see the big LED headlight replacement manufacturers offering them.
However...since I have a rule of "different environments will give you different results" (especially in reference to my other channel, @carlightreviews), I kinda wanna buy some LED versions of the D1S to replace the C6 Corvette HID and see how they actually work out. Interested in seeing that?
@@InJasonsGarage Great, Jason, want to give you a little Bio on myself and Corvette ownership. I am 73 years old , and live in Ma. In my life time , since I was 16 I have owned ,up to the car I own now, close to 40 Corvettes .Plus a 68 Shelby GT 500 Kr convertible and a scattering of GTA Trans Ams .
Today I own the same car as you except it is a 2011 GS auto with 20K on the clock.
I am going to subscribe to you channel, because you have the closest likes and dislikes I do.
Cary on and I'll comment later.🚦
@@z512345 Wow, sounds like you have had a GREAT series of cars! Maybe you should make a CZcams channel, too! Glad you like the videos!
ugh, high beam and turn signal are NOT LED - glad to see we have another option but damn, you would have thought those were no brainers?!?!?!?!? The high beam I could deal with but the turn signal .... UGH
I hear ya...but I suppose the tradeoff is the price for this one is lower than the full LED version.
Should've used chainsaw to open the 📦. 😆(AvE)
Nice review but easy pass on these. Keep my OEM black ones i have.
Not to challenge, but curious as to why? I am super interested in your thoughts.
Sell me that car now lol
Make me an offer that I can't refuse. LOL! 😀
nope
Quite a thoughtful comment.🤣
@@InJasonsGarage some things don't need a lot of explanation. crap warranty , sealed un- replaceable bulb, non led high beam, at $700 is absolutely ridiculous
So which bulbs do i need for this headlights? Unfortunately I didn't understand everything because I come from germany
You need H7 for the high beam. You do not need a low beam as it is LED.
@@InJasonsGarage H7 LED or H7 Halogen? Which one do you recommend? I have a look on the philips ultinon pro6000 led