I can't believe i came across this video...I want to do this to my Bighorn. What is the kit part number, please?! And is this a perfect color match to the Brilliant White Clearcoat color? Thanks for this vid, dude!
I would suggest putting the clips on the molding 1st. Slide them into the tabs on the molding then simply snap it in place. Much easier and does not risk breaking the clips or the molding not fitting the contour.
Glad I found this video. I have a Laramie and want to remove the fender flares. Don’t like the look of them at all. Was worried there would be holes but looks like I’m good to go 👍🏽
Great video! I drive a Bighorn as well and have considered putting fender flares on mine also. Did you paint yours or did you have it professionally done? Also, now that you've had them for awhile, have you noticed any damage to the paint where the flares come in contact to the sides of your truck? Again, Thank you for the video. I have subscribed to your channel.
Hello. I can’t find the splash guards. I have a big horn. I need the Laramie guards. I have flares just need guards. Are you able to send me the link where you brought your from. Please and thanks
Can you please send me a link for where you purchased the kit? I tried a set from Busheacker and they separate from the body when the sun shines in them. Obviously this isn’t good. Thank you
Alright so I’m installing mine now… and I just noticed that I don’t have bolts/screws for the top portion of my fender flare nor is there a receiving end for a bolt/screw. Any suggestions?
so5thgen it’s a plastic tab that sticks out on the backside of flare that help location of flare correctly on wheel well. I will take a photo of it today and send it to you.
@@Bigb9298 Mine had the tab at 12 o’clock. So you just push it in the hole and it’s aligned there. I left the lowest bolt on each side of the the wheel well. Pushed the flare in at the tab, then unbolted the front lowest bolt, and loose bolted in that hole. Then did the other lowest bolt the same way. This way the inner plastic piece stays put, and your flare is aligned and easy to install the rest of the bolts once you have the tab inserted and farthest bolts connected.
What is the name of the part that is the bottom moldings?..Also you took a 2020 laramie bottom fender molding and put it on a 2019 bighorn is that right?..I purchased the these same fender flares that I'm gonna paint with rhino bed liner and I ordered the om 2019 laramie mud flaps but I did not realize that bottom small molding isn't gonna fit back on after a put the flare on. Any info to help would be appreciated. Thank you
I just installed these OEM flares on my 1500 Ram, but mine came with an adhesive tape strip on the back with a little pull tab that you pull once you have it in place and bolted up. I bolted it in, backed off 10 cranks, and pulled the strip covering the adhesive and kind of pulled back a hair as I worked my way around (pulling of the cover of adhesive tape) No gap issues at all. I’m kind of surprised your adhesive back was missing. My instructions said to apply alcohol to the fender before install. My Autobody guy said use degreaser. So I did both. I installed just the rear fenders for now because I’m installing headers in 3 weeks and will have to take out the plastic inner fender piece to access the bolts. One cool thing was they arrived painted gloss black which is not far off my metallic black color... You have to look close to see the difference. So I saved on painting.
man, I ordered a pair of these OEM flares for a 22 2500. they come with a bunch of push pins that require holes drilled into the face of the fender! Not sure what my next move will be as I am not going to do that. Maybe snap them off and apply double sided tape in their place?
Have have not tried adding mud flaps I would search which ones fit a laramie + and you should be good to go. Let me know what you find bud! No issues with 305’s and a leveling
How far do the 20x12s stick out past the fenders with flares? I’m going back and forth between 22x10 or 22x12s. I have the flares factory on my Laramie. Thanks brutha
What would you suggest for paint protection behind the flares? I drive on sandy roads up north in Michigan and recently noticed that my bug shield had ruined the chrome on top of my headlights where it was rubbing, I could see the same thing happening on the fenders.
I am going to purchase a rubber seal that attaches to the edges of the flares. I am hoping that this will minimize or even completely eliminate any possibility of paint damage.
@@mybatterhalf6614, imho the sand would get in between the rubber and the fender and do the same thing, I think the only way to do it is like he answered my question, 3m clear tape on the fender.
SO, are we installing fender flares??? We didn't come here to watch you hawk some cleaners. I'm only in it for 15 sec. Now I'll go to an informative site to watch.
I can't believe i came across this video...I want to do this to my Bighorn. What is the kit part number, please?! And is this a perfect color match to the Brilliant White Clearcoat color? Thanks for this vid, dude!
I would suggest putting the clips on the molding 1st. Slide them into the tabs on the molding then simply snap it in place. Much easier and does not risk breaking the clips or the molding not fitting the contour.
Glad I found this video. I have a Laramie and want to remove the fender flares. Don’t like the look of them at all. Was worried there would be holes but looks like I’m good to go 👍🏽
Good video. I’ve got the factory flares on my 22 Laramie. The rear flares seem to constantly get chewed/nicked up by rocks.
Do you have a video of how you installed the 3m tape or can you show a link for what kind of tape
I just got these flares. No where to put 3m tape. No flat area
The link expired I guess trying to find these for my truck hopefully i can find a kit like you did
Great video! I drive a Bighorn as well and have considered putting fender flares on mine also. Did you paint yours or did you have it professionally done? Also, now that you've had them for awhile, have you noticed any damage to the paint where the flares come in contact to the sides of your truck? Again, Thank you for the video. I have subscribed to your channel.
Where can I order the OEM fender flares and different mud flaps for my 2021 Ram 1500? Seen no link on proper place to order these flares. Thanks!
eBay
I want and need these for my truck
🤜🏻🤛🏻
Why post the video and not share with the 100s of people asking what kit it is?
Did you find any 3m tape the kinda hides? If so do you have a link or remember the name? Thx
LOOKS GREAT! love that is the OEM, did you buy them separatly or did it come in a kit? IF So, what'S the PART NUMBER? please
333640911399 eBay
Hey where did u get those from. Iv been looking for some for a while now
Andrew Klein parts-ave on eBay but make sure to order 3m tape I’ll have to redo mine
@@so5thgen I can’t find anything parts-Ave on eBay. You got a link?
Did you find them I can’t? If so you have a link?
@@ronbang they were on eBay a few months ago not sure about now though
Link for them?
Nice video bro, did you get them white or you painted it?
What about all the clips on the upper portion of the flares? How come your dont have them
What Kit is this?
Hello. I can’t find the splash guards. I have a big horn. I need the Laramie guards. I have flares just need guards. Are you able to send me the link where you brought your from. Please and thanks
Website:
Moparaccessorygiant.com
Front part# 82215488AB
Rear part# 82215489AB
Do they make a kit like this for the 2020 Heavy Duty trucks? Basically a 4th gen body still.
There’s a few on eBay
Can you please send me a link for where you purchased the kit? I tried a set from Busheacker and they separate from the body when the sun shines in them. Obviously this isn’t good. Thank you
Know the part numbers for the spats that came with the flares?
Alright so I’m installing mine now… and I just noticed that I don’t have bolts/screws for the top portion of my fender flare nor is there a receiving end for a bolt/screw. Any suggestions?
Sorry for the late response, did you find some screws?
Those flares didn’t have a location hole tab on the flare did they. My work supplies those to FCA SHAP assembly plant. 👍 looks good
Brian Upchurch what’s the location hole tab?
so5thgen it’s a plastic tab that sticks out on the backside of flare that help location of flare correctly on wheel well. I will take a photo of it today and send it to you.
@@Bigb9298 Mine had the tab at 12 o’clock. So you just push it in the hole and it’s aligned there.
I left the lowest bolt on each side of the the wheel well. Pushed the flare in at the tab, then unbolted the front lowest bolt, and loose bolted in that hole. Then did the other lowest bolt the same way.
This way the inner plastic piece stays put, and your flare is aligned and easy to install the rest of the bolts once you have the tab inserted and farthest bolts connected.
If you ever remove them youll be suprised to find scuff marks on the paint where the fender touches. I was
What is the name of the part that is the bottom moldings?..Also you took a 2020 laramie bottom fender molding and put it on a 2019 bighorn is that right?..I purchased the these same fender flares that I'm gonna paint with rhino bed liner and I ordered the om 2019 laramie mud flaps but I did not realize that bottom small molding isn't gonna fit back on after a put the flare on. Any info to help would be appreciated. Thank you
@so5thgen Just received the same flares you installed from eBay, is the 3m tape necessary if so how did you apply it. Thanks in advance.
They’re not required for install. But I did see tabs to help compensate the clear coat rubbing
I just installed these OEM flares on my 1500 Ram, but mine came with an adhesive tape strip on the back with a little pull tab that you pull once you have it in place and bolted up.
I bolted it in, backed off 10 cranks, and pulled the strip covering the adhesive and kind of pulled back a hair as I worked my way around (pulling of the cover of adhesive tape)
No gap issues at all.
I’m kind of surprised your adhesive back was missing.
My instructions said to apply alcohol to the fender before install. My Autobody guy said use degreaser.
So I did both. I installed just the rear fenders for now because I’m installing headers in 3 weeks and will have to take out the plastic inner fender piece to access the bolts.
One cool thing was they arrived painted gloss black which is not far off my metallic black color... You have to look close to see the difference. So I saved on painting.
Where did you get your fender flares from?
man, I ordered a pair of these OEM flares for a 22 2500. they come with a bunch of push pins that require holes drilled into the face of the fender! Not sure what my next move will be as I am not going to do that. Maybe snap them off and apply double sided tape in their place?
Did you ever find a solution bud? I would of tried the cut method
@@so5thgen yep. Trimmed off the pin and attached double sided tape. Between that and the bolts that go in from the bottom it is rock solid.
Where did u buy the flares
eBay 333640911399
Can you put mud flaps on with these? Specifically the husky ones? Also why do people ask how you clear 305/50/20 with a level is fine no?
Have have not tried adding mud flaps I would search which ones fit a laramie + and you should be good to go. Let me know what you find bud! No issues with 305’s and a leveling
Didn’t see link where I can buy for my ‘20 BH.
How far do the 20x12s stick out past the fenders with flares? I’m going back and forth between 22x10 or 22x12s. I have the flares factory on my Laramie. Thanks brutha
Go with 12’s you won’t regret it. Without measuring I’d say close to 1.25”
Where can I buy these fender flares ? Part #? Great looking truck btw.
Search on eBay
Wher did u get your fender flares
Nice Video. Can you provide part number and source? Also, can you order them with OE paint or did you get them done after receiving them?
GBPackMaster eBay search for parts-ave these did not include the 3m tape I will need to redo them
@@so5thgen what do you mean about re do them ?
Where you will put the 3m tape ?
@@alfredibarra8526 OEM comes with tape on back
@@so5thgencant put tape anywhere on them.
Hey my friend, what size tires are you running?
What kind of 3m tape? Edge trim?
What would you suggest for paint protection behind the flares? I drive on sandy roads up north in Michigan and recently noticed that my bug shield had ruined the chrome on top of my headlights where it was rubbing, I could see the same thing happening on the fenders.
I use 3m double sided tape as a protective layer
I am going to purchase a rubber seal that attaches to the edges of the flares. I am hoping that this will minimize or even completely eliminate any possibility of paint damage.
@@mybatterhalf6614, imho the sand would get in between the rubber and the fender and do the same thing, I think the only way to do it is like he answered my question, 3m clear tape on the fender.
Where did you grab these. I need a billet silver set
I have a loose one, like you can pull it away from the body. Any ideas guys?
Loosen the screws and apply pressure when tightening them back up. Let me know if this works
Where did you purchase those flares ?
eBay
where did you get this kit and are they color match?
From eBay and they came color matched
Did they install better with the tape? Mine does not have bolts on the top of both wheel wells?
Daniel Sanchez have yet to swap them with tape still waiting for a decent day!
S L mine came with all the screws message us on Instagram if you still need them we can help locate them
@so5thgen Where did you get the 3m tape?
Hey bro any update on what 3m tape you used? What size??
what wheel off set you have
Are the rear fender flares the same for rambox?
Thans
Where did you buy this at
eBay 333640911399
You have the laramie splash guard part number
Where do you get this Kit?
I will try and grab an updated eBay link
Did they come painted?
gregory9740 yes they did
@@so5thgen can you post a link where you bought them from?
gregory9740 www.ebay.com/itm/184128223438
Can I have the link please? Thank you very much
Ahmad Al Ameer www.ebay.com/itm/184128223438
What is the 3M tape for?
Prevent Rubbing up the plastic flares onto your clear coat
How do you like the for of the flares after having them on for a while? Also how much do they stick out beyond the fenders? Thanks.
They’re still holding up great. I’d say maybe 1”-1.25” I’d have to measure if but for reference it’s the same as any OEM Ram
@@so5thgen thanks, much appreciated!
I know this video is older but ive been searching everywhere for those exact same flares.
333640911399
3.92 or 3.21?
Adin Lucena 3.21
Do you know of any reason why these couldn't be used on a 2500/3500?
Great question!
No 3m tape for these?
Nick Fulp they didn’t come with any but talking to a few guys I will need to add some
It’s not really necessary with factory flares. They actually fit pretty snug
@@phoenixblack1220 The factory flares come with the tape, the guide tab, and come gloss black.
Didn’t see a link for these fender flares. Could you please reply a link.
Truck looks cool man
From eBay
👍👍😎!
😎🤩!
Where can I buy a doll's for my 2021 ram bighorn
Where can I buy those for my 2021 ram bighorn
They are on eBay! Link should be in video desorption if it’s still active. But 19+ (new body) is the same as 2021 hope this helps
SO, are we installing fender flares??? We didn't come here to watch you hawk some cleaners. I'm only in it for 15 sec. Now I'll go to an informative site to watch.