Φιλε μου ειναι γνωστο αυτο το λαμπακι και αναβει μονο στα βαγκ σε κανενα αλλο αυτοκινητο γιαυτο και ειναι πολυ προβληματικα και τωρα εγω το πουλαω το αυτοκινητο επειδη αναβει το λαμπακι για να παρω κατι που να μην αναβει το λαμπακι κι ας ειναι μπουρδελο ευχαριστω
I still have the marelli ecu. I would like to try a me7.5, but I heard that it’s not exactly plug and play. Some sensors are different as well as the throttle body. But that’s what I heard, I haven’t really looked into it.
@@NachoBides ahh i see, who mapped the magnetti marelli ecu? It seems like it can be done as there is a video of a Lupo 1.4 on here where they swapped to a bosch me7.5 ecu but it looked complicated
@@44ro.n SPtunes, it is based in Thessaloniki,Greece. I have seen the lupo you are talking about, i think they are using different throttle body. Of course it will not be very difficult, but it probably needs some searching. What are your lupo specs?
@@NachoBides mine is currently a standard BBY engine and i wanted to install a lupo gti inlet and renault throttle body however on a forum post someone said they did this and the ecu could not handle it so it ran too lean. I was wondering if the 1.6 injectors would help this but i’m not sure
@@44ro.n mine has an aub intake manifold and the renault 57mm tb. With the stock bby injectors it was running lean after 6k rpm, although I also have schrick cams and my block is 1.6. Now I'm using bbz injectors and it is fine till the 7k revlimit. Keep in mind that bbz injectors will not work very well on the stock bby tune. It will run rich in low rpm causing engine stalling during idle etc..
hello ive sent you a message on vwwatercooled, if possible can u send me more pictures of the intake you bought? im trying to make one to use 70mm throtle boddy
Hey! The intake manifold I bought was basically composed of the stock aub runners and a custom plenum. The bolt pattern for the throttle body was the stock one for aub, so basically the biggest throttle body I have found so far is the 57mm vdo. I believe this is as big as you can go with stock bolt pattern as there seems to be no space for bigger diameter. Other than that the particular intake I got had some quality problems and decided not to use it. What 70mm throttle are you trying to use? Every vdo throttle body seems to have the same 6 pin layout, but the bolt pattern differs. Maybe if you could make a spacer its possible to use it one the stock manifold, but I'm not sure if you will benefit so much.
@@NachoBides i will be changing the ecu, with that i have the opportunity to change to an aftermarket TB, I just wanted more pics just to give a friend of mine and see if he can make something similar
@@athineos657 Μαλλον διαβασες την απαντηση στο σχολιο του παιδιου πιο κατω με το λαμπακι.. Χαβαλε κανουμε, φιλαρακι μου ειναι. Δεν υπαρχει καμια προθεση να πουληθει το αμαξι
Καλημέρα σας,να ρωτήσω, το λαμπάκι του κινητήρα τι ακριβώς σημαίνει?
Φιλε μου ειναι γνωστο αυτο το λαμπακι και αναβει μονο στα βαγκ σε κανενα αλλο αυτοκινητο γιαυτο και ειναι πολυ προβληματικα και τωρα εγω το πουλαω το αυτοκινητο επειδη αναβει το λαμπακι για να παρω κατι που να μην αναβει το λαμπακι κι ας ειναι μπουρδελο ευχαριστω
did you keep the magnetti marelli 4mv ecu in the end or swap for a bosch one from a golf? was it plug and play?
I still have the marelli ecu. I would like to try a me7.5, but I heard that it’s not exactly plug and play. Some sensors are different as well as the throttle body. But that’s what I heard, I haven’t really looked into it.
@@NachoBides ahh i see, who mapped the magnetti marelli ecu? It seems like it can be done as there is a video of a Lupo 1.4 on here where they swapped to a bosch me7.5 ecu but it looked complicated
@@44ro.n SPtunes, it is based in Thessaloniki,Greece. I have seen the lupo you are talking about, i think they are using different throttle body. Of course it will not be very difficult, but it probably needs some searching. What are your lupo specs?
@@NachoBides mine is currently a standard BBY engine and i wanted to install a lupo gti inlet and renault throttle body however on a forum post someone said they did this and the ecu could not handle it so it ran too lean. I was wondering if the 1.6 injectors would help this but i’m not sure
@@44ro.n mine has an aub intake manifold and the renault 57mm tb. With the stock bby injectors it was running lean after 6k rpm, although I also have schrick cams and my block is 1.6. Now I'm using bbz injectors and it is fine till the 7k revlimit. Keep in mind that bbz injectors will not work very well on the stock bby tune. It will run rich in low rpm causing engine stalling during idle etc..
hello ive sent you a message on vwwatercooled, if possible can u send me more pictures of the intake you bought? im trying to make one to use 70mm throtle boddy
Hey! The intake manifold I bought was basically composed of the stock aub runners and a custom plenum. The bolt pattern for the throttle body was the stock one for aub, so basically the biggest throttle body I have found so far is the 57mm vdo. I believe this is as big as you can go with stock bolt pattern as there seems to be no space for bigger diameter. Other than that the particular intake I got had some quality problems and decided not to use it. What 70mm throttle are you trying to use? Every vdo throttle body seems to have the same 6 pin layout, but the bolt pattern differs. Maybe if you could make a spacer its possible to use it one the stock manifold, but I'm not sure if you will benefit so much.
@@NachoBides i will be changing the ecu, with that i have the opportunity to change to an aftermarket TB, I just wanted more pics just to give a friend of mine and see if he can make something similar
@@SensezZz I'm abroad now so I don't have the intake, but I think I have some photos saved on my laptop. How can I contact you to send them?
Θέλω και γω..
τι κάνουμε τώρα? 😂
Ωραίο! Δεν μου λες αδερφέ που μπορώ να σου κάνω μερικές ερωτήσεις για το set up αν επιτρέπεται;
Ναι φιλε μου
@@NachoBides μπορείς να μου πεις τι συμπίεση έχουν τα πιστόνια;
@@cswwerx5483 Μαμα ο bcb έχει 11.5:1, εμενα κατέβηκε και ενα δέκατο η κεφαλή οπότε λιγο παραπάνω.
Και δίνει και παει και δωστου κι ανοίγει
Μη ξεχνας οτι ανοιγει και για να δωσει
Δικεεεε μουυυυυ.... Οτι ειναι σε σκόνη είναι καλοοοοο
Πάει πολύ πιο καλά από το δικό μου...🙁
Ειναι λιγο σκαλισμενο..😁
@@NachoBides φίλε μου το έδωσες τελικά ή ακόμα, αν επιτρέπεται;
@@athineos657 εννοεις αν το πουλησα?
@@athineos657 Μαλλον διαβασες την απαντηση στο σχολιο του παιδιου πιο κατω με το λαμπακι.. Χαβαλε κανουμε, φιλαρακι μου ειναι. Δεν υπαρχει καμια προθεση να πουληθει το αμαξι
Καλά κάνεις! Λίγα χιλιόμετρα έχεις, και το δικό μου το seatακι συνεχίζω να το κρατάω! Κοντεύει 2 χρόνια