Adam Savage's One Day Builds: Brass Watering Can!
Vložit
- čas přidán 4. 09. 2020
- Join this channel to support Tested and get access to perks:
/ @tested
For his wife's birthday, Adam makes from scratch a brass watering can for tending to their succulent garden! It's going to involve a wide range of brass working techniques to piece it together from raw sheets and tubes, from the engineering of the form to the machining and soldering of parts together to make it actually functional. And by the end, it becomes a beautiful bespoke gardening tool!
NOTE: This video does not include any footage of Adam actually using the watering can, so he filmed a clip after the request came up in a live stream.
You can watch it on his Twitter: / 1303147613479337986
his Instagram: / ce257owndrx
OR his Facebook: / 3603433823003108
Tested Ts, stickers, mugs and more: teespring.com/stores/adam-sav...
Subscribe for more videos (and click the bell for notifications): czcams.com/users/subscription_c...
Twitter: / testedcom
Facebook: / testedcom
Instagram: / testedcom
Discord: / discord
Amazon Storefront: www.amazon.com/shop/adamsavage...
Savage Industries T-shirts: cottonbureau.com/stores/savag...
Tested is:
Adam Savage / donttrythis
Norman Chan / nchan
Joey Fameli www.joeyfameli.com
Gunther Kirsch guntherkirsch.com
Ryan Kiser / ryan.kiser
Jen Schachter www.jenschachter.com
Kishore Hari / sciencequiche
Sean Charlesworth / cworthdynamics
Jeremy Williams / jerware
Kayte Sabicer / kaytesabicer
Bill Doran / chinbeard
Ariel Waldman / arielwaldman
Darrell Maloney / brokennerd
Kristen Lomasney / krystynlo
Intro bumper by Abe Dieckman
Thanks for watching!
#AdamSavage #OneDayBuilds #DIYWateringCan - Věda a technologie
NOTE: This video does not include any footage of Adam actually using the watering can, so he filmed a clip after the request came up in a live stream.
You can watch it on his Twitter: twitter.com/donttrythis/status/1303147613479337986
his Instagram: instagram.com/p/CE257oWnDRX/
OR his Facebook: facebook.com/therealadamsavage/posts/3603433823003108
What is the hand belt sander you use at 39:24
Exactly ! Lol
I was watching and holding my breath hoping that Adam DID NOT drink the water from the watering can!!!! Oh geeeeeezzzzz!!!!
Brass pipes don't buckle if they are fitted with a right size core, it is all to do with tolerances. I grew in brass instrument shop, you can also roll them back to flat but it also requires something round that is very close to the inner diameter. We use rare earth magnets and rolling bearings now, magnet covered with leather so you can remove it and it doesn't get too close to the opposite magnetic metal.
What kind of over-alls are you wearing in these videos? Its driving me crazy i really want a pair! Please help. Thanks and keep up the good work!
Please keep this less produced format when covid is over, this is a lot more interesting to watch than the "TV show" style video
It's much more watchable.
We really feel like we're in the shop with you. Learning from you. Maybe even helping you.
I agree this format is much nicer to watch, but as a company, that can't just kick a handful of people off the team because some people on the internet said so. I'd assume there's at least 5 people on the team behind the camera
Same way I feel about Jay Leno’s Garage channel 👍🏻 more down to earth and personal feel. I dig it
well it was nice while it lasted... as of today were back to shaky handheld shots and constant high speed zoom in and out :(
The excitement Adam has to make something for his wife is absolutely precious. His happiness is contagious through the video.
To the editor(s): using Adam’s drumming as part of the soundtrack was amazing! Excellent job!!
You can see he's trying to make something worthy of their life. A master making a gift is like music.
It's so great watching a builder pour their heart into something that will mean a lot. 💛
@CatastrophicBlend “POUR their heart into something...” I see what you did there...😏😆
Has Adam built a drum yet? It'd be awesome if he made himself a little "thinkin' drum" to mount by the end of a workbench. Just a mounted or welded-up assortment of small odd shapes of different materials moubted on a little metal rack that has a good resonating chamber perhaps.
Somethig like kalimba meets xylophone, with a touch of steel drum and cowbell?
And of course, in a blue moon, a new project-in-progress might yield up a small addition to the thinkin' drum.
This is what a creative person looks like. Him breaking into a drum solo in the midst of crafting his own watering can just solidified that for me.
What a great personality 😄
Adam’s a lot more interesting than I realized watching him as a kid on myth busters.
A real legend 💪🏼😎👍🏼
"What did I write?"
"That's between me and my wife."
Just the way it should be, warms my heart (:
He actually changes it to "my partner" 51:23
@@densmorde4520 51:45 no....
What brought me to this channel is: I loved watching Adam on Mythbusters.
What keeps me here: his passion and absolutely infectious excitement for his craft. I can just feel his happiness as he works through a project.
His 'bongo' playing is like the physist Richard Feynman's bongo playing past time.
Same
Am I the only one that wanted see him watering the succulents with it?
Was hoping the same.
KEEP THE SELF FILMED FORMAT!!!! So much better than the crazy camera work before the COVID-19 era.
Man, this might be the best tested video yet. Love the emotion, the enthusiasm, the excitement, the spontaneous drum jam, the flaws, the craftsmanship, the see-as-we-go, the moments you forgot to press record and the little secret message between you and your wife. Please don't stop doing these video's. They make my day.
23:10 Adam should try his hand at making a set of steel drums.
*absolutely...that would be so much fun to watch...not as a one day build but as an actual super serious project for use by local musicians*
*several ways of doing this...one being the typical steel drum set that is then polished and chromed...then perhaps a variant set as you might find in a blade runner setting ....followed by a Mad Max world setting then maybe an H.R Giger alien setting....true the last three would be insanely complex and expensive to produce so a lot of planning would be needed, but when completed they could easily be rented out to production houses for background movie props and Comic Con musical events...just sayin'*
or a handpan
and then remix that sound with the sound of him putting the brass tubes back in the rack!
Or a Chopper tank, on the old Orange County Choppers, with Mikey helping.
@@josephbarrett6528 I was hoping someone else was going to bring up how musical that sounded..
*the fact that this watering can will slowly acquire an outstanding and beautiful patina over the years of usage is such an awesome thing to ponder*
Unless they actually make a point to tell the family story of it, it's a genuine concern that the inheritor might not know - and might think this is a high quality, but mass produced, item. Or at least have no idea it's a one-off artisan piece!
Nothing speaks love more than making something yourself for your wife, it looks fabulous!
So, how long before someone remixes the brass being put away into a song?
with him banging on the bottom as percussion
and 32:37
@Noa Dannaker u done yet?
@Noa Dannaker Cant wait to hear it!
@Noa Dannaker we're still waiting
I love how the brass made differnet notes as it was dropped in the rack at around 5 mins in.
I found myself wishing he had more so he could make a little tune out of it lol
I think he bought that rack just so he could drop them like that.
Combine those with Adam’s drum circle drumming at 22:40 and I think you might have something there 😂
@@scoobertmcruppert2915 a big brass band!
Right? Now I want him to invent some random made up instrument, the "mythrimba" or the "faupani" or similar.
A lovely present. When you were inscribing it, I thought, “Oh. That’s kind of personal. I don’t think he’d want to share that.”
No surprise, that you didn’t. Classy. Good respect for boundaries.
So glad to have a way to directly support your work. Wishing you well on this new chapter.
Ehhh, it probably just said something normal and totally not all that personal & private, like, "I love you" or "Happy birthday/anniversary, more years to come" etc. I'd bet money on it.
Adam’s deep affection for his wife is apparent in the bashful pride and pleasure of this build. Quite sweet.
Watching a man make something so beautiful for the woman he loves so dearly is one of the most beautiful things in this life. Thank you for sharing this.
As a musician, lemme just say that that drumming section was pretty impressive lol
As a fellow drummer I concur
Drum solo at 22:35 for anyone wanting to smile a lot!
I was waiting for him to start stomping his foot as well lol
As NOT a drummer, BUT a Bassist, so part of the Rhythm Section, I too was hiigghhllyyy impressed. He should totally do a ODB: Tankdrum, of some kind...so many opportunities to customize and perhaps innovate...and then we can be treated to an Adam Savage hand-drum solo outtro to the video! it's a win for everyone involved!!
Sorting the tubes back in the rack had some musical potential, too.
I’ve really enjoy the cruder less produced videos where he shoots on his phone, it feels better to watch than what seems like a movie
Love that Adam is thoughtful enough to make the watering can oblong/oval. A lot of watering can for sale is a circular can which is irritatingly a waste of storage space that I ended up using a square plastic jar of apple juice as it is flat enough to store in the back of my garden tool box.
And that is way prettier than mine!!! Adam's wife is so lucky to have such a handy husband!!!
The only man in the world who made a montage of putting things back. It's amazing.
Adam is the only person who can make it interesting to make a watering can.
What about putting back brass tubes - did you notice the different tones when they bounced? :D
How about that spontaneous STOMP performance? 🤣🤣
It's truly Dinner and a Show with Adam!
Makes anything interesting ❤️
Right, could even make the process of watching paint dry into a interesting display of science and chemistry
Why wouldn’t making a watering can be interesting?
5:05 Each one a different sound. A symphony of organization.
I thought the same! Nice reward for tidying.
We need a shot of Adam going through and dropping each size so they can all be remixed.
The lazy man’s unassembled organ
I was thinking the same- how fantastic each one made a distinctive note and also considered how cool it would be to use that as the basis for a sample pack.
@@LogicalNiko If he's lucky, he might already have the first part of Happy Birthday somewhere in there.
I am REALLY loving these self shot, less produced videos. Something really cozy about it.
You're a marvelous craftsman, an amazing storyteller, and a super-creative individual - but I've gotta tell you, man: Your enthusiasm and boundless excitement is what really makes me such a fan! I can be in a lousy, unmotivated, tired mood, and a few minutes of watching your videos, and I am ready for a project. Sorry for the gush. As you were...
26:26 This is his Step-drill, he never knew his real drill.
I see what you did there
"whatcha doin' step drill?"
32:37 he says fuck
Kdw Edselstein an appropriately dad joke style dad joke.
everyone else would run in a Hardware store and buy a Watering Can, but _being able_ to make it on your own, makes it priceless!
Mr. Savage, I was wondering if by chance you have seen the technique they use to bend brass instruments; mostly trumpets and trombones. I saw they fill the brass tubes with a soft freezing substance and then bend itso it doesnt deform while making a 180° turn for the valve section. Would that be useful or practical to use in a shop setting? Maybe art?
@@Mr.Delirious1756 "freezing" sounds like it would possibly be complicated. eg, difficult to control/keep frozen... or come winter, difficult to thaw :p
but... brass instrument makers would have the knowledge.
Everyone else cant afford the £30,000 in tools
@@deanmc2823 you could do it for a lot less.. but yea, 1~2k in tools, and a hundred in brass is a lot more than most people want to invest in for a watering can.
@@tzxazrael you absolutely don't need 3k in tools to do this!
Shout out to the Tested editors, you make this show look so smooth and engaging and it really makes Adam shine. Good work, and I hope you're getting some "you" time too!
It's nice to see you put so much of yourself in to something for your wife. it's not the item that's important it's the time, effort,and love of makinging it that's the real gift. I hope she loved it.
"If you're reading this love, you're holding it upside down."
Omg I'm going to effing miss stuff like at 23:47 now that you're back in the same space.. Adam filming a timelapse barely in frame and I'm loving it because your beautiful editors put in his drum solo on top. Perfection to an extent that cannot be matched!
I laughed so hard at that. You can imagine the conversation leading up to making that decision to include it in the timelapse.
Lovely watering can. I enjoy all your builds and watch when I'm sewing, as that's my area of expertise. Currently I am pursuing projects of 1880 - 1901 garments.
That is exactly what I’m doing!! What are you making?
@@AlysianaHunter An 1892 Potato Cannon 🥔
Take care of yourself Adam.
This quarantine is taking years off our lives.
Worst year of my life, but I won't go into that.
I love you Mr. Savage. Thank you for these videos.
Too all the Tested crew, Love you too.
I love how Adam has been doing this for so many years, yet he still gets genuinely excited when he makes something.
22:40 Think we need a "One day build: Steelpan Drum" soon
One day build, thirty days to tune it.
His wife is a lucky lady! What a beautiful, sweet gift!
4:49 Adam plays a percussive pipe instrument
The inscription: Dear Mrs. Don'ttrythis, I am sorry I use things like this as a drum sometimes
I love how the background music for the montage after the 'drum Solo', is the 'Drum Solo'..Genius..
Dear Mrs. Donttrythis, do try this!
I just knew in my SOUL that at some point in this video he would say "I'm a little teapot".
When the first part of the video feed it out I was looking at the cane in the background and I thought man that would look so cool with a leather wrapped candle and then you come back on and say you’re going to wrap the handle and leather! I am definitely going to make one of these for my wife and my daughter such an amazing little design it looks so classic and clean fantastic job!!
There is something to be said when making an item where the primary drive in making the item is love. Normally items are made for profit or for functionality and that is as it should be but when an item is made for love it does not have to be profitable, or sensible even in its construction. Lavishes can be made, time and care that are too expensive for profit and when you are done you have an item unlike any other. One made by hand that tells a story of our love for another person, an item made not just functional but created to bring joy and happiness to another. Those are the very best projects. I really like that you didn't reveal what you wrote on the bottom of the can. Thanks for sharing such a great build :)
Would love to see a three part series of building the same “thing” each time but with three separate variations, improving on design and concept with each iteration. For example, with this build the next iteration would address fixes for the issues you ran into with the leaks while making the spout look more like one piece and improving weight balance. There is always room for improvement, I think it would be cool to see a series that crowdsourced potential improvements through multiple iterations.
As a leather worker, I would very much love to see a One-Day-Build about making a better strap cutter
Ooh, seconded. I haven't worked with leather in years, but I remember hating our damn slippy strap cutters.
Same here. That would be great.
49:18 Something really beautiful about that look of pride on Adams face, truly a wonderful moment.
The man goes from space suits and trebuchets to brass watering cans. Love it!
I love that you keep the inscribing secret at the end. So wholesome :)
if Disney makes a live action Pinocchio I think they need to hire Adam to be Geppetto. He would just be a natural.
The older he gets the more I see him that way with his apron and his extreme dedication to his craftsmanship.
Keep up the good work Adam, your wife is very lucky to have you, and happy birthday to her.
The love for his wife just absolutely shows within this project. Spectacular job!
Ill be waiting for the 10 hour long Adam brass drum mix
I remember watching an old episode of How It's Made where they were making brass instruments. To prevent the tuning collapsing as it was bent into complex shapes they made a mixture of detergent and water and filled the tubs with it, sealed them, then froze them, bending the tubes while frozen
I was thinking of the exact same episode while watching this!
Also fine sand works. Really anything to provide resistance inside while still being pliable
HOW IS HIS STREAM OF CONSCIOUSNESS SO INTELLIGENT AND WELL SPOKEN?! Keep up the great vids.
The sound of the brass being dropped back into the rack was immensely satisfying!
I can't believe it took nearly 24 minutes for you to sing "I'm A Little Teapot")
I was sitting there waiting for it, too.
This video could be placed in a museum as an example of "flow state".
Hey Adam! Nice job! If you're interested I have a tip for you on keeping the buckling down on tubes. Plug one end with glue or whatever, and fill the tube with sand. Then when you're bending it you have something keeping it from deforming. :)
i would’ve loved to see your wife’s reaction to receiving such a lovely gift! handmade is always nicer & more from the heart.
A very thoughtful gift, good husbanding Adam!
This is what I imagine Clint does in Stardew Valley whenever I update my tools.
Ahhh same
Can't imagine Clint being this enthusiastic or musical... But hey, that upgraded watering can sure is nice.
@CATS - You don't lose anything. Learn to check the weather forecast. ;^)
+
I love these builds but I especially loved your drum solo. Awesome to see someone have so much fun in a shop. I wish I could hang out with you. I feel like there's so much to be learned from you.
What a likeable chap. 8) Great to catch him in his own native environment instead of via the lens of Mythbusters production - though he leaves us a great legacy in those programs. Bravo Mr. Savage! Looking forward to more of your natural enthusiasm for making.
04:47 Listen to Adam play on the K&S brass organ-iser. ;)
This is an awesome gift!
May I make a design suggestion to any other makers inspired by this? As a grower and seller of plants, I fill and carry a lot of watering cans on a daily basis. My suggestion is to offset the fill hole to one side of the can (ideally to the right for right handed folks and the the left for left handed folks). This would make it easier to fill under any tap without the handle getting in the way, allowing the user to hold the can in their dominant hand, or rest the can on a solid surface to trickle fill without the water running down the handle and off the outside of the can. Also, for a name or business logo on the outside, put it on the user's dominant hand side means that the name/logo is on the side facing away from the user and toward the rest of the world when in use, which to me would be 👌. Again, super build. Kinda reminds me of one I had as a kid, and something I would love and cherish. Hand made gifts are the best IMHO!
This comment needs to be higher!
Commenting at the beginning here. I am a jeweler and knife maker as well as a restorer of antique tools, weapons, jewelry and the like. I am a sucker for brass! Especially brass and wood, but you can't go wrong with brass! I also happen to be a succulent collector myself. May have to make something like this! I really love when you say you will let the build determine the final design. That is my method on almost every single project I do. I plan and start with a detailed idea, but the build always determines certain aspects of the final product... and I am always (97%😆) pleased with the results. I believe that is one thing that makes HANDMADE items so much more valuable, sentimentally as well as monetarily (for sellers like me). I also love that you're building for your wife! I try to make my wife and family things any time I am able. The item is so much more personal, its absolutely priceless. Now back to watching!
Dude! adam savage has always been a hero of mine! The guy is a legend! Find another leak then find another leak. Dudes a great man for more than creativity and inspiration!
Watching you bend tubing and talking about how you do it reminds me of watching my dad bend EMT tubing for electrical work. Most people don't give electrical tubing a second thought, but done right it's an art form.
Aaaawwwwww! I wanted to see/ hear her reaction. The best part of building something for someone is their reaction. Daaaaaamnit.
It is such a joy to watch Adam create something. He seems like the happiest kid on the planet.
A spousal reaction or mention of how it was received in a future video would complete this build. Happy Birthday Mrs. Don'tTryThis
Adam Savage's Tested: Come for the build, stay for the wisdom.
Shame we didn't see it in action, or the reaction to the gift. But an amazing build and design
yeah I was hoping he'd at least show her with at the end
I wanna see it in action too
Her reaction is the same as the message at the bottom of the can: it's between them alone.
I appreciate that you kept what you inscribed on the bottom between you and your partner :) Shows what kind of man you are :) Blessings and good health to your family.
Love the build ,showed my partner she said “looks lovely but it will go green “thank you loved the process
I can imagine Adam saying the oxidation is part of the story.
"I'll be making a tool."
*builds watering can
Me: That's the strangest looking hammer I've ever seen.
Funny you say this.... He did actually build a tiny brass hammer in one of his videos...
Bet I could still use it to drive a nail
This comment right here...
Yis,
ty,
10/10
would like again
Every tool's a hammer. 😜
Every tool's a hammer....I am No hammer?
Adam Savage: He makes his own gardening cans and uses them as drums.
This may have been the best ODB yet. So much heart and thought behind this one!
Adam, I really appreciate your attitude and enthusiasm to not only do one day builds but to also flim as well. I find it Funny and interesting. We need people like you during a time like this pandemic.
Drink every time Adam calls it a flowerpot.
I was just about to post that myself!!
*installing secondary back up liver...now*
My liver has been shot since march, i dont think i can survive this
It's 8am here and I don't wanna get that drunk this early 🤣
How did i not notice this?
Huh, I never realized that's why most anvils have that distinct shape with the tapered, round end (to shape round things of course!). Someone really put a lot of thought into anvils thousands of years ago.
That's the "horn". And yes, exactly for that and other things as needed by the project
its nice making gifts , its not the cost or the time,, its the effort and love.. great stuff.
I really appreciate the higher output of videos. It has very much helped keep me sane.
Here's a tip Adam, when wrapping leather around a handle try rolling it up and applying it like tape. That'll keep you from fighting it so much and letting it hit the floor and get dirty.
Hi Adam! I hope you and your family are doing well and staying safe!!!
Just popped in my head: "Let's waste time, chasing leaks, around the can." Beautiful build.
We love you Adam, and we understand you want to listen to music sometimes, so you go to a timelapse, but thats often when we miss seeing some of the most interesting part of the job. You know, there are incredibly comfortable, high quality headphones these days that you could easily wear without worrying about recording the music on camera, and risking a DMCA takedown. Just a suggestion. Keep up the good work, Norm
awww I wanted to see Adam's wife's reaction!
I love the tones made when you drop the tubing back into the rack *grins*
#2 ~ When are you building your brass drum set?
I remember taking a big water bottle, attaching a bit of plastic sheet to the cap and putting a hole in the cap to help my parents water their potted succulents.
The hole in th plastic sheet acted like a valve where crushing the bottle made water flow, but without the pressure it was fine.
Time to step it up for their upcoming 65th birthday
I truly enjoy watching this guy work! He Is responsible for inspiring generations of makers
I really love Gunther's editing, especially the "**sanding noises**" and other similar subtitles. The best was "**angry LEGO sorting noises**".
Great editing, but it's too bad he edited Adam's 2-hour long bongo drum concert down to only 30 seconds.
22:39 "Forget the succulents, I'm making a drum!"
god bless the editor and whoever mixed the music and sounds because this is just awesome to listen to from beginning to end
Adam, I can't fully put into words how much I appreciate your build videos, and the other videos too. Thank you. I've watched Mythbusters as a very young child and it was honestly one of my favorite shows. And now as an adult, I still watch you do what you do best, build stuff. I am a little bummed that there's not as much explosions these days, just saying lol. Hope you're doing well.
What a fantastic result! Again a massive thanks to Adam and the team for keeping me sane during the pandemic!
Oh how I wish you had shown us how you assembled the spout :(
flinx so by nesting, do you mean that each tube is a little smaller on each end tho? Or does each tube simply fit exactly into the size before it? That’s why I had hoped to see the asse
1:57 am, and I just burst out laughing at the full-length impromptu-drum solo. We must protect this man at all costs.
This was awesome, and helpful! I have a wooden stool in the shape of a whale whose tail broke off years ago. A friend made it so I couldn't bear to part with it but it's been hidden away. We recently moved to the farm country just outside New Bedford MA ( the home port in Moby Dick), so it is time for a whale repair job. I sort of designed a tail made of brass for it that can be smaller than the original because the brightness of the metal offsets the dark wood. I haven't done metal work since High School - but what I learned was that I was WAY too concerned about the solder joints being flush. This project doesn't have to hold anything but attention. Thanks!!!
We have more than 100 One Day Builds! Here's the full playlist: czcams.com/play/PLJtitKU0CAej22ZWBqrimPkn0Bbo6ci-r.html
Love the watering can great build a metal project I worked on I had the same issue about how to sign it. I came up with using a stencil of my signature and then pinning it basically like a sandblaster you use but it uses little tiny metal balls. It turned out very well.
When you reach 365 you should create a playlist of "1 year of builds". Might still take a while, but hey, it is all about the journey.
I absolutely love One Day Builds! It's the main reason I subscribed.
Thank god he’s filming this himself, the cameraman made me feel sick last time!
Adam, a good chanel for brass work is the banjo show. A lot of steampunk brass work.
Adam you should consider getting a slip rolled they usually come with groves that fit up to 1/2 in round bar or tubing. That tool would make bending the handle much easier.
The line language of the handle into the curve of the spout gives me Art Nouveau /Art Deco vibes. Really beautiful
Suggestion: solder a thin flat piece of brass between the front seam of the can, the spout and the spout support. Cut your wife's initials into that piece of brass for a personal touch. Love all the beautiful detail work!!!